1. To assist Engineer to conduct NPI, establish process flow, preparing tools ,test fixtures/equipment.
2. To prepare FA report and Assembly Specifications (AS) for new products before mass production.
3. To prepare Operating Instructions (OI) for both Production and Engineering department.
4. To study and make recommendations on process, productivity and yield improvement.
5. To assist Engineer in carrying out root-cause analysis on the customers’ complaint and complete 8D
reports .
6. To provide technical support to Production department in whatever way deemed necessary to ensure
the smooth running of Production with minimal disruption.
7. To assist Engineer in preparing RFQ (request for quotation) in terms of labour cost calculation, BOM
listing, analysis of material specifications, recommendation of alternative material and the overall
general calculation sheet.
8. To work closely with Sourcing and Order Management departments in order to complete the RFQ ontime to customers.
9. To perform any other tasks that may be requested by the Superior from time to time
<Troubleshooting technical issues.
<Diagnosing and repairing faults.
<Replacing or repairing the necessary parts.
<Testing and evaluating new technologies.
<Speaking to customers to quickly get to the root of their problem.
< Handling QC report ,engrave, marking & coding , service printer
· To inspect over for products in operations such as TSR, BSR AND FSR to ensure that they meet production standards, before send to customer
· To meet the quality standards on the soldering of the assembly or the production
process
· Inspect, test or measure the materials or products being produced.
· Compare the measurements results vs the standards to ensure the results of the
products are met
· Enhance with the measurement tools such as micrometer, calipers, gauges or meter.
Demeanour, Qualifications, Knowledge and Skills Required
The ideal candidate’s demeanour and approach to life and work should be as follows:
Biscuit-loving, fun-loving, optimistic, innovative, energetic, aspirational, tech-savvy, and eager to learn with a hearty zest for life, specifically humble, open, fearless and yet possessing a little edge to think and go out of the box;
...
Mechanical Technician
JOB DESCRIPTION:
• To attend breakdown and conduct troubleshooting and repairing of machines and equipment related to the production processes.
• To conduct preventive maintenance as scheduled and following the department’s sop.
• Routine inspection of the production line and facilities equipment.
• Assist with machinery set up, installation and calibration.
• Ensure that safety procedures are followed and maintained during maintenance activities.
• Any other ad-hoc duties assigned by superior or management.
Qualification :
• Certificate / Diploma / Professional Certificate in mechanical engineering or any related engineering study
Exeperiences :
• At least 2-3 years and above of experience & skill knowledge on mechanical maintenance and installation such as grinding, welding, machine assembly, etc.
Other Personal Capabilities:
• Highly motivated, positive thinker and achiever
• Strong personality, reliable, tolerant and determined
• Ability to work under pressure and meet deadlines
-Menjalankan penyelenggaraan pencegahan harian (P.M) untuk mengurangkan gantian peralatan kerosakan. Dengan catitan rekod.
- Bertanggungjawab dalam pemasangan, pemantauan dan masalah pengendalian mesin baru.
-Menjalankan pemantauan trending dan pengesahan prestasi mesin harian pengeluaran.
-Lain-lain kerja yang di arahkan oleh penyelia dari masa ke semasa
1) Melakukan kerja penyelarasan, pembaikan dan penggantian peralatan loji dan sistem.
2) Kerja-kerja kimpalan, pembaikkan paip, longkang, mengecat dan lain-lain
3) Lain-lain kerja yang di arahkan oleh Supervisor atau HOD.
1. Awam:
Kelayakan : Diploma Kejuruteraan Awam
-Untuk melaksanakan kerja-kerja Kejuruteraan Awam di hospital yang merangkumi aktiviti penyelenggaraan, penyelesaian masalah dan pembaikan di Bangunan Hospital, Jalan dan Tempat Letak Kereta, Tanah dan Landskap, Pagar dan Pintu -, Sistem Saliran, Sistem Pembetungan, Sistem Bekalan Air, Perabot, Peralatan Dapur, Kelengkapan Sanitari , Papan tanda dan kerja awam lain yang berkaitan.
-Lakukan kerja yang boleh termasuk: penyelenggaraan, pembaikan, pengubahsuaian, pemasangan dan pembinaan pada salah satu daripada aktiviti berikut: Permaidani dan jubin, Penapis, kaca, Kunci, Batu, Pelukis plaster, Bumbung dan teduh dan bidai, Membaiki perabot dan pintu.
-Menilai dan menganggar susun atur kerja dan masa dan bahan yang diperlukan untuk menyelesaikan tugasan.
-Pemeriksaan rutin harian ke atas kerja-kerja kejuruteraan awam.
Untuk memastikan kerja Kejuruteraan Awam di Hospital diselenggara dengan berkesan dan mematuhi semua keperluan berkanun.
i. To assist your superior in carry out Scheduled Maintenance (PPM) on all the electrical system in hospital based on the schedule stated in HSIP and HEPPM.
ii. To ensure the housekeeping, safety, health and environment aspects in the workshop are strictly followed as per Company’s policies and procedures.
iii. Highlight any irregularities, customers’ grievances, complaints and dissatisfaction; providing feedback to management.
...
Responsibilities:
Perform machine troubleshooting, repair and maintenance
Improve equipment performance (downtime reduction, reduce reject parts)
Requirements:
Candidate must possess at least a Diploma in Mechanical/ Electronic/Mechatronic Engineering or any related field
Fresh graduates are encouraged to apply for this position.
1. We are looking for a suitable candidates to working with us as an IT Technical Specialist / Support for our Customers (Multinational Companies)in Batu Berendam
2. Must have at least 6 months of working experience on IT Support environment
3. Strictly for local applicants / Malaysian citizen only
...