- Singapore Singapore
Full Time QC Engineer Jobs, Salary up to SGD 7,000 in Gradiant International Holdings PTE, LTD - Maukerja
Share
Save
Working Location
Job Description
Responsibilities
JOB RESPONSIBILITIES:
Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
Ensure quality of inspected items meet project requirement and standard.
Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
Ensure HSE requirements are always all in place and ensure compliance to HSE regulations and requirements.
Ensure that the construction quality is in accordance with the approved Project Quality Plan.
Read, understand, and implement project related ITP, Procedures, Specification requirements.
Review Documents and Drawings as per specification.
Ensure Material verification against MDR, MIL Cert, etc.
Verify and ensure cutting plan against actual cutting of material.
Perform fit-up inspection against drawing/WPS.
Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
Perform visual inspection and maintain the reports.
Ensure inspectors surveillance reports/ inspection reports are in place.
Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
Maintain latest drawings and raise NCR if any non-compliance observed.
NDE % coverage monitoring and maintain the register as per project requirement.
Attend daily toolbox meeting in time.
Participating on weekly HSE safety briefing and delivering talk.
Conduct weekly quality walk with client/PMT.
Review piping pressure test pack and compiling of weld and material summary reports.
Monitoring and maintaining record of inspection status of piping test packs.
Co-ordinate with Notifying body for site inspection PED approval
Final document compilation and submission and get client acceptance.
Conduct audits, creating audits finding reports and determine proper corrective and preventive actions.
Communication with Client, Vendors and Internal team.
Material Verifications on all incoming outgoing project related materials.
Handle and decide on disposition of non-conforming material.
Able to plan and resolve drawing details and discrepancies.
Ensure the calibration of measuring tools are up to date.
Oversee QC activities, ensure the job deliver on time.
Anticipate and resolve problems encountered in the field to eliminate costly rework or retesting.
Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
Responsible for the initiation, collection, disposition and retention of QA/QC records in a timely manner in accordance with documented procedures.
Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
Perform site inspections at subcontractor workshops.
Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
Submitting weekly report and requested information / statistics to Department QC Supervisor.
Liaison with QA/QC Manager for all aspects of quality
SKILLS/EXPERIENCE/EDUCATION REQUIRED:
Candidate must possess at least Bachelor’s degree/Post Graduate Diploma/Professional Degree in Engineering (Chemical), (Mechanical) or equivalent
Minimum 10 years of relevant working experience in EPC projects with multi discipline.
Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
Understanding engineering drawings and specification requirements.
Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
Understand piping fabrication/installation inspection and testing requirements.
Familiar with basic conventional NDT methods.
Computer literate and familiar in using basic Microsoft office programs.
Good team player and able to work independently.
Reliable, well-organized and detail oriented.
Good communication and interpersonal skill
Excellent organizational and strong verbal and written skills
Knowledge of Health & Safety requirements
Carry out other duties as may be assigned from time to time by your Superior
Gradiant is a global solutions provider and developer of cleantech water projects for advanced water and wastewater treatment. Our end-to-end solutions and technology expertise enable sustainable and cost-effective treatment of the world's most important water challenges.
With a full suite of robust and proprietary technologies, powered by the top minds in water, Gradiant serves its clients' mission-critical operations in the world's essential industries. We are committed to sustainable and clean water treatment technologies, with expertise in water reuse, resource recovery, and brine concentration for minimum and zero liquid discharge (MLD / ZLD).
Clients choose Gradiant for our exclusive and unmatched technical solutions; flexible delivery models for project development and financing; global strength with local expertise; and our passion to translate R&D innovations into commercial solutions. Our inspiration comes from our customers – how we can best address their unique needs and situations.
Gradiant was founded at the Massachusetts Institute of Technology (MIT) to create and deploy sustainable water treatment solutions for meaningful change in our environment, society, and economy. Today, with over 400 employees, Gradiant operates from its headquarters in Boston and Singapore and offices across ten countries.
At Gradiant, we create New Possibilities for Water for our clients and the communities they serve to ensure a safer and more promising tomorrow. For more information, please visit *************
Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
Ensure quality of inspected items meet project requirement and standard.
Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
Ensure HSE requirements are always all in place and ensure compliance to HSE regulations and requirements.
Ensure that the construction quality is in accordance with the approved Project Quality Plan.
Read, understand, and implement project related ITP, Procedures, Specification requirements.
Review Documents and Drawings as per specification.
Ensure Material verification against MDR, MIL Cert, etc.
Verify and ensure cutting plan against actual cutting of material.
Perform fit-up inspection against drawing/WPS.
Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
Perform visual inspection and maintain the reports.
Ensure inspectors surveillance reports/ inspection reports are in place.
Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
Maintain latest drawings and raise NCR if any non-compliance observed.
NDE % coverage monitoring and maintain the register as per project requirement.
Attend daily toolbox meeting in time.
Participating on weekly HSE safety briefing and delivering talk.
Conduct weekly quality walk with client/PMT.
Review piping pressure test pack and compiling of weld and material summary reports.
Monitoring and maintaining record of inspection status of piping test packs.
Co-ordinate with Notifying body for site inspection PED approval
Final document compilation and submission and get client acceptance.
Conduct audits, creating audits finding reports and determine proper corrective and preventive actions.
Communication with Client, Vendors and Internal team.
Material Verifications on all incoming outgoing project related materials.
Handle and decide on disposition of non-conforming material.
Able to plan and resolve drawing details and discrepancies.
Ensure the calibration of measuring tools are up to date.
Oversee QC activities, ensure the job deliver on time.
Anticipate and resolve problems encountered in the field to eliminate costly rework or retesting.
Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
Responsible for the initiation, collection, disposition and retention of QA/QC records in a timely manner in accordance with documented procedures.
Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
Perform site inspections at subcontractor workshops.
Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
Submitting weekly report and requested information / statistics to Department QC Supervisor.
Liaison with QA/QC Manager for all aspects of quality
SKILLS/EXPERIENCE/EDUCATION REQUIRED:
Candidate must possess at least Bachelor’s degree/Post Graduate Diploma/Professional Degree in Engineering (Chemical), (Mechanical) or equivalent
Minimum 10 years of relevant working experience in EPC projects with multi discipline.
Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
Understanding engineering drawings and specification requirements.
Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
Understand piping fabrication/installation inspection and testing requirements.
Familiar with basic conventional NDT methods.
Computer literate and familiar in using basic Microsoft office programs.
Good team player and able to work independently.
Reliable, well-organized and detail oriented.
Good communication and interpersonal skill
Excellent organizational and strong verbal and written skills
Knowledge of Health & Safety requirements
Carry out other duties as may be assigned from time to time by your Superior
Gradiant is a global solutions provider and developer of cleantech water projects for advanced water and wastewater treatment. Our end-to-end solutions and technology expertise enable sustainable and cost-effective treatment of the world's most important water challenges.
With a full suite of robust and proprietary technologies, powered by the top minds in water, Gradiant serves its clients' mission-critical operations in the world's essential industries. We are committed to sustainable and clean water treatment technologies, with expertise in water reuse, resource recovery, and brine concentration for minimum and zero liquid discharge (MLD / ZLD).
Clients choose Gradiant for our exclusive and unmatched technical solutions; flexible delivery models for project development and financing; global strength with local expertise; and our passion to translate R&D innovations into commercial solutions. Our inspiration comes from our customers – how we can best address their unique needs and situations.
Gradiant was founded at the Massachusetts Institute of Technology (MIT) to create and deploy sustainable water treatment solutions for meaningful change in our environment, society, and economy. Today, with over 400 employees, Gradiant operates from its headquarters in Boston and Singapore and offices across ten countries.
At Gradiant, we create New Possibilities for Water for our clients and the communities they serve to ensure a safer and more promising tomorrow. For more information, please visit *************
Important Information
Never provide your bank or credit card details when applying for jobs. Do not transfer any money or complete unrelated online surveys. If you see something suspicious, Report this Job ad.
Learn More