Jobs
Companies
Forums
Design Engineering Jobs in Pulau Pinang - September 2026 - Urgent Hiring
Showing 139 jobs results for
"design engineering"
in Pulau Pinang
Never miss any updates for Design Engineering jobs in Pulau Pinang
Manage Alert
Undisclosed
- Develop head-media interface designs that meet product performance requirements and scale into high-volume manufacturing environments.
- Improve hard disk sputtering processes to reduce defects and enhance manufacturing yield.
- Optimize magnetic areal density by reducing head-media spacing while maintaining reliability specifications and performance standards. ...
Posted
20 days ago
Undisclosed
Malaysia
- Perform RTL-to-GDSII physical design implementation for digital IC/SoC designs.
- Execute floorplanning, power planning, placement, Clock Tree Synthesis (CTS) and routing.
- Perform timing optimization and Static Timing Analysis (STA) to achieve timing closure. ...
Posted
8 days ago
Undisclosed
- Minimum Diploma / Degree holder
- Experience in CAD / CAM is an advantage
- Some GD&T knowledge ...
Posted
12 days ago
Undisclosed
- Working on 10nm/7nm/5nm or lower nodes designs with various customers.
- Responsible to understand and develop flow/methodology using Perl/TCL programming for PnR activities (Floor planning, Placement, CTS, and Routing).
- Expertise in solving lower node technology related problems for critical designs to achieve desired performance, area, and power targets. ...
Posted
2 days ago
Undisclosed
Malaysia
- To design and develop product that meet customer requirement.
- Mainly focus on the Analog and Digital Design.
- Turn electronic design into schematic, PCB layout, and finally working product that meet product specification. ...
Posted
15 hours ago
Undisclosed
- Architecture & Protocol Research: Deeply understand company FPGA device architectures, application scenarios, classic algorithms, and protocol specifications.
- End-to-End IP Development: Analyze market requirements to define architectures and design algorithm models (C/C++, Matlab, etc.). Write RTL code (Verilog/VHDL), create reference designs, and develop verification environments (SystemVerilog).
- IP Packaging & Delivery: Utilize EDA tools and scripts to package IPs, including the development of IP GUIs and comprehensive IP package testing. ...
Posted
5 days ago
Undisclosed
Malaysia
- Perform full-custom layout design for analog and mixed-signal circuits using Cadence layout tools.
- Develop layouts for high-speed I/O circuits, including SerDes, DDR I/O, and other high-speed interfaces.
- Implement layouts for analog IPs such as PLLs, DLLs, LDOs, Bandgap References, and other precision analog circuits. ...
Posted
5 days ago
Undisclosed
George Town
- Perform mechanical engineering design, calculations and technical analysis.
- Prepare design drawings using AutoCAD and other relevant design tools.
- Prepare technical submissions, reports and design documentation. ...
Posted
7 days ago
Undisclosed
- : Strong foundation in Mechanical Engineering, with the ability to apply engineering principles to real-world design and machine development.
- : Proficiency in Design Engineering and Machine Design, including creating mechanisms, assemblies, and systems that meet performance and reliability targets.
- : Experience in Product Design, with skills in translating requirements into practical, manufacturable mechanical solutions. ...
Posted
7 days ago
Undisclosed
Malaysia
- Perform end to end physical design flow:
- o Floorplanning
- o Power planning (PG grid, IR) ...
Posted
8 days ago
Undisclosed
Malaysia
- Perform floorplanning, power planning, placement, CTS, routing, and timing closure.
- Analyze and fix setup/hold violations, signal integrity, IR-drop, and electromigration issues.
- Execute DRC, LVS, ERC, and antenna checks to achieve signoff-quality designs. ...
Posted
8 days ago
Undisclosed
Malaysia
- Develop conceptual designs, prototypes, and finalized solutions for products and automation equipment to meet customer specifications.
- Create design concepts, CAD models, and detailed drawings, ensuring optimal product solutions.
- Conduct brainstorming, design reviews, and verification processes before fabrication or tooling release. ...
Posted
15 days ago
Undisclosed
- DAILY TASK
- The Design Engineer reports to Design Lead Engineer and is responsible for designing the chemical dispense system or any miscellaneous products as per customer specification & Kinetics engineering footprint. The design engineer is also responsible for ensuring all design releases to production as per ISO SOP as well all handover documents such as drawing, operation and maintenance manuals and material datasheets submission at committed timelines.
- II. RESPONSIBILITIES ...
Posted
21 days ago
Undisclosed
Malaysia
- Perform other engineering tasks as assigned by the Superior to support departmental objectives.
- Basic knowledge in Vulcanization Process
- Innovation, Efficiency and Ambition: this is what VAT has stood for over 50 years. ...
Posted
16 days ago
Undisclosed
Malaysia
- We are looking for the Mechanical Design Engineer assigned to the Vulcanization Tooling Design section is responsible for the design, development, qualification, and continuous improvement of vulcanization molds, as well as related tooling, fixtures, and equipment.
- This role focuses primarily on creating robust and manufacturable vulcanization molds that meet dimensional, quality, process, productivity, and tool-life requirements. The role covers the complete tooling lifecycle from detailed design and fabrication through tool validation, process qualification, troubleshooting, and continuous improvement.
- The role works closely with Process Engineering, Production, Industrial Engineering, and external tooling vendors to support NPI, ramp-up, and mass production, ensuring molds and related tooling are manufacturable, cost-effective, sustainable, and compliant with process, safety, quality, and engineering requirements. ...
Posted
16 days ago
Undisclosed
Prai
- Administer, develop, maintain all related engineering drawing templates.
- To follow all Group quality directives and input and suggest improvements where relevant.
- To follow the company’s policy to ensure as much project scope as possible is kept within the Group. ...
Posted
5 days ago
Undisclosed
- Degree or diploma in engineering/construction management or equivalent.
- Minimum of 7 years' work experiences.
- Extensive knowledge and experience in AutoCAD Plant 3D. ...
Posted
5 days ago
MYR4,000 - MYR10,000 Per Month
Malaysia
- Develop and Design of mechanical system architectures, define interfaces and manage clear, testable requirements
- Leads FEM interpretation for complex structures across multiple regions, performs sensitivity and correlation studies, resolves critical design issues, and adapts load case definitions to region-specific parameters (e.g. Seismic). Apply regional safety factors and ensure compliance with international engineering and safety standards
- Develop robust tolerance concepts and geometric dimensioning strategies for large-scale assemblies ...
Posted
17 days ago
Undisclosed
- Experienced in synthesis, Place & Route, timing closure, PV, PI, PPA improvement. etc and major EDA tools including Cadence, Synopsys, and Mentor tools.
- Implementation of multimillion gate SoC designs in cutting edge process technologies (16nm,14nm & below). Experience in Finfet technologies is a must.
- Expertise in floor planning including power grid design to meet EMIR specifications. ...
Posted
8 days ago
IDEAL VISION INTEGRATION SDN BHD
Undisclosed
- Design and develop mechanical systems for automated vision inspection systems for wide range of industrial applications.
- Review equipment design for compliance with engineering principles, company standards, product requirements and related specifications.
- Collaborate with vision software team on system integration jobs from design stage until system delivery. ...
Posted
8 days ago
Undisclosed
Malaysia
- Design and develop advanced layout for complex, high-density, and high-speed multi-layer boards (including HDI, blind/buried vias, skip vias and microvias).
- Optimize component placement and routing for signal integrity (SI), power integrity (PI), thermal performance, and EMI/EMC control.
- Develop high quality designs for various board types, including rigid and rigid-flex configurations. ...
Posted
8 days ago
Undisclosed
- Own and execute block-level and/or full-chip Physical Design from netlist to GDSII
- Perform: Floor planning & Power planning & Placement and optimization & Clock Tree Synthesis (CTS) & Routing & Post-route optimization
- Drive timing closure across multiple modes and corners (MCMM), including setup and hold ...
Posted
18 days ago
MYR3,000 - MYR3,000 Per Month
Malaysia
- Sketching initial design ideas.
- Design & develop new product for existing or new customer within schedule.
- Brainstorming as part of a team or developing design concepts using CAD (computer-aided design). ...
Posted
24 days ago
Undisclosed
- Assist in the design and development of analog and mixed-signal circuits and subsystems.
- Support hardware architecture development for test and measurement instruments.
- Perform circuit simulation and analysis using EDA tools such as LTSpice, PSpice, HSpice, or equivalent. ...
Posted
15 days ago
Undisclosed
Malaysia
- A recognized Degree/Master in Mechanical/Mechatronics or equivalent
- Proficient in Solidworks or related CAD software
- Experience in machine design, product development, project management will be an added advantage ...
Posted
5 days ago
Undisclosed
- Purpose Statement: To perform engineering design services and other related product development and/or product commercialization services. Please refer to discipline core skills for specifics.
Posted
7 days ago
Undisclosed
Malaysia
- Demonstrates the ability to work independently in multiple phases for the Product Realization Process, without direction from mentors or functional management.
- Develops engineering/product concepts that are innovative, high-quality, cost-appropriate, and satisfy all stakeholder's (customer, manufacturing, material, agency, etc.) needs and requirements through an established area of technical specialty and, where applicable, mentorship of others on the global discipline team.
- Demonstrates skill in the full product realization process, as it applies to their role & region ...
Posted
8 days ago
Undisclosed
- Demonstrates the ability to work independently in multiple phases for the Product Realization Process, without direction from mentors or functional management.
- Develops engineering/product concepts that are innovative, high-quality, cost-appropriate, and satisfy all stakeholder's (customer, manufacturing, material, agency, etc.) needs and requirements through an established area of technical specialty and, where applicable, mentorship of others on the global discipline team.
- Demonstrates skill in the full product realization process, as it applies to their role & region ...
Posted
8 days ago
Browse Location:
More Location
Browse "design engineering" Job By: