Jobs
Companies
Forums
Electronics Engineering Jobs in Pulau Pinang - October 2026 - Urgent Hiring
Showing 166 jobs results for
"electronics engineering"
in Pulau Pinang
Never miss any updates for Electronics Engineering jobs in Pulau Pinang
Manage Alert
MYR2,500 - MYR3,600 Per Month
Prai
- Perform FA laboratory tests according to assigned FA requests and approved test procedures
- Conduct visual and microscopic inspection of PCB/PCBA and electronic components
- Conduct testing using appropriate laboratory equipment based on the assigned FA requirement ...
Posted
10 days ago
MYR2,100 - MYR2,400 Per Month
- Diploma in any relevant field
- Fresh Graduates are encouraged to apply
- Relevant technical/manufacturing experience is an advantage ...
Posted
10 days ago
MYR1,700 - MYR4,000 Per Month
Prai
- To take care of PCBA/Module test and debug.
- To support installation and modification tester with test engineer.
- To performs preventive maintenance, co-ordinates with vendor for machines calibration, ...
Posted
10 days ago
Technician (Fresh Electrical - Electronics Graduate) Technician (Fresh Electrical - Electronics Graduate)
Iotronix Technologies Sdn Bhd
MYR2,300 - MYR2,300 Per Month
- Health insurance
- Meal allowance
- Perform component-level troubleshooting on defective PCBAs and functional test failures generated from the production floor. ...
Posted
10 days ago
Undisclosed
- Die Prep (Backgrind, Laser, Sawing/Dicing, Pick & Place, 2nd Opt
- FOL (SMT, Solder Paste Printing, Chip Cap Attach, Fluxer, Reflow Oven, Flux Clean)
- MOL/EOL (Dispenser, Reflow Oven, Lid/Stiffener Attach, Ball Mount, Indium Attach, Fluxer) ...
Posted
10 days ago
MYR2,800 - MYR3,800 Per Month
- Job Responsibilities
- ① Proficient in at least one type of placement machine, and able to independently maintain the responsible equipment.
- ② Daily management of spare parts of the equipment in charge, and simple fault analysis of damaged spare parts. ...
Posted
10 days ago
MYR2,000 - MYR2,000 Per Month
- Diploma in engineering, mechatronics, mechanical, electrical, or a related field.
- Good communication and interpersonal skills.
- Willing to work shifts / odd hours. ...
Posted
10 days ago
MYR2,100 - MYR3,500 Per Month
- Responsible for repairs / troubleshooting of mechanical and electrical assemblies within the manufacturing operation.
- Troubleshoots and repairs complex mechanical and electrical assemblies used in equipment to the component level.
- Operates electronic test equipment such as oscilloscopes and special tests as required. ...
Posted
10 days ago
MYR1,900 - MYR3,500 Per Month
- To ensure all the ICT/FCT failure boards wip transaction are proper control by performing the debug wip counting every beginning and end shift.
- Proper recording on failure boards transaction from production.
- Repair and troubleshoot all the failure boards and feedback the causes to concern section for improvement. ...
Posted
10 days ago
Undisclosed
- Review and follow instructions covering the scheduled and emergency repair, installation, and inspection of work to be done.
- Advise when the immediate shutdown of equipment is necessary to minimize damage, or when temporarily continued operations will have no harmful effect.
- Dismantle, clean, repair, replace, etc. electrical equipment taking all safety precautions. ...
Posted
15 days ago
OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang
Undisclosed
- At least 2 years of related working experience in semiconductor industry.
- Experience in semiconductor manufacturing is an advantage.
- Experience in Product Development processes. ...
Posted
20 days ago
MYR2,500 - MYR3,600 Per Month
Prai
- Perform FA laboratory tests according to assigned FA requests and approved test procedures
- Conduct visual and microscopic inspection of PCB/PCBA and electronic components
- Conduct testing using appropriate laboratory equipment based on the assigned FA requirement ...
Posted
20 days ago
MYR1,700 - MYR4,000 Per Month
Prai
- To take care of PCBA/Module test and debug.
- To support installation and modification tester with test engineer.
- To performs preventive maintenance, co-ordinates with vendor for machines calibration, ...
Posted
21 days ago
Undisclosed
Bandar Perai Jaya
- Responsible for test board debug & testing
- Liaise with board designer to debug test board issues
- Maintain inventory control of electronic components and tools ...
Posted
21 days ago
Undisclosed
Malaysia
- Respond promptly to tester breakdowns and equipment issues to minimize production downtime.
- Install, configure, maintain, troubleshoot, and repair tester hardware and software.
- Perform tester setup, calibration, qualification, and verification prior to production release. ...
Posted
21 days ago
Undisclosed
Malaysia
- Person in charge for designated disciplines in design and technical aspects;
- Strong knowledge in commercial/industrial electrical systems.
- Experience in design for both electrical generation and distribution system for high, medium and low voltage. ...
Posted
13 days ago
Undisclosed
- We are expanding! A great opportunity to be part of the dynamic and fast-growing team.
- Excellent opportunities for career advancement.
- One of the global leaders in cleanroom automation. ...
Posted
22 days ago
Undisclosed
- Responsible for implementing automation and equipment integration projects in BMI plants
- Configure, install and support Edge device and software for equipment integration on plant automation system
- Configure, install and support Operational Technology (OT) application and servers ...
Posted
16 days ago
Undisclosed
- Use industry standard electrical design tools to design, simulate, and verify board level analog circuits for test and measurement applications, including: Linear power supplies
- Switched mode power supplies (DC–DC)
- High precision/highspeed analog front ends (including ADCs, DACs, amplifiers) ...
Posted
18 days ago
Undisclosed
- Research and propose alternative parts with effective solutions in consideration of avoiding major software & product calibration, hardware topology changes to replace EOL parts in NI products.
- Implement and simulate designs through CAD and synthesis tools. i.e. Mentor Graphics.
- Verify and validate designs of hardware re-designs. Debug any issues that may arise. ...
Posted
8 days ago
Undisclosed
Bandar Perai Jaya
- Production line sustaining (e.g. Tester troubleshooting).
- Perform preventive and corrective maintenance on test equipment.
- Troubleshoot and repair test stations, automated test systems, and related hardware. ...
Posted
a month ago
Undisclosed
George Town
- Develop, configure, and optimize industrial processes from start-up through ongoing development.
- Conduct process assessments, measurements, and data interpretation for capacity and line balancing.
- Design, test, run, and upgrade production systems and workflows. ...
Posted
22 days ago
MYR2,800 - MYR3,800 Per Month
- Job Responsibilities
- ① Proficient in at least one type of placement machine, and able to independently maintain the responsible equipment.
- ② Daily management of spare parts of the equipment in charge, and simple fault analysis of damaged spare parts. ...
Posted
a month ago
Undisclosed
Prai
- Provide engineering support for New Product Developments (NPDs), Modifications (MODs), Standard Product Options, and legacy product maintenance and technical support projects.
- Plan and execute assigned projects while ensuring deliverables, timelines, and project objectives are achieved.
- Collaborate with customers, Product Management, and Sales teams to develop VOC-aligned solutions while adhering to the Product Development Process and working closely with Engineering, Manufacturing, AQP, Tooling, and Reliability teams. ...
Posted
25 days ago
Undisclosed
Bandar Perai Jaya
- Perform daily burn-in operations and provide equipment support for testing.
- Operate and support Soak Test, Module Burn-In (Module BI), TC BERT, SHTOL, Temperature Cycling, Roadm, Temp Cycling and Traffic Test and processes.
- Operate, monitor, inspect, and perform basic troubleshooting and preventive maintenance (PM) on burn-in chambers, ovens, and test equipment. ...
Posted
a month ago
Undisclosed
- Research and propose alternative parts with effective solutions in consideration of avoiding major software & product calibration, hardware topology changes to replace EOL parts in NI products.
- Implement and simulate designs through CAD and synthesis tools. i.e. Mentor Graphics.
- Verify and validate designs of hardware re-designs. Debug any issues that may arise. ...
Posted
a month ago
Undisclosed
- Use industry standard electrical design tools to design, simulate, and verify board level analog circuits for test and measurement applications, including: Linear power supplies
- Switched mode power supplies (DC–DC)
- High precision/highspeed analog front ends (including ADCs, DACs, amplifiers) ...
Posted
a month ago
Undisclosed
Malaysia
- Continuous improvement of production test programs for automotive ICs on Automated Test Equipment (ATE)
- Support/lead tasks and projects from development to release for mass production
- Improve test programs for quality, test time and yield by modifying existing or introducing new test methods ...
Posted
3 days ago
MYR5,000 - MYR5,000 Per Month
- Develop, implement, and maintain Quality Management Systems (QMS) in compliance with ISO 9001, ISO/IEC 17025, and RF regulatory requirements (FCC, CE, ETSI, IEEE)
- Prepare and manage documentation for audits, certifications, and regulatory approvals.
- Assist in internal audits and external audit readiness. ...
Posted
8 days ago
Undisclosed
Malaysia
- Four to eight years in DFT or test engineering.
- Boundary scan, ICT and coverage analysis tooling expected.
- Degree in electrical or electronic engineering. ...
Posted
9 days ago
Browse Location:
More Location
Browse Company:
More Companies
Browse "electronics engineering" Job By:
Browse "electronics engineering" Job By: