Engineering Jobs in Batu - September 2026

Ensure proper and safe keeping of machines and factory facilities. 2. Ensure an efficient arrangement of raw material 3. Ensure the processing of the product according to guidelines. 4. Be responsible for packing and storing of finish product. 5. Maintain general cleanliness of the machines and factory 6. Undertake processing of prodcut and operating of machines as directed by superior. 7. Inform the superios on any irregularities in the factory operation 8. Undertake other duties assigned by superior from time to time. 9. Contribute to the Management of company leading to plans and objectives associated with Qc and Production. 10. Any other task that may be assigned to you from time to time by the company.

Communication

Be an early applicant!

Posted

2 months ago

Master Lead Engineering Support Technician, Test Engineering Master Lead Engineering Support Technician, Test Engineering

Sandisk

Full Time

Batu

To support engineer on the task given (TP checkout, SW Validation)
To deliver the task with minimum supervision
Shows the interpersonal skill and participate in team discussion. ...

Posted

8 days ago

FACILITY TECHNICIAN, FACILITY ENGINEERING MAINTENANCE FACILITY TECHNICIAN, FACILITY ENGINEERING MAINTENANCE

KPJ Healthcare

Full Time

Batu

To perform trouble shooting and repair of Electrical Systems and ELV systems.
To monitor the M&E contractor’s during new project and existing renovation works.
Check all lightings in and around the hospital building on a regular basis, replaced detective tube, bulbs and fixtures as required. ...

Posted

4 days ago

Staff Engineer, Packaging Engineering, Structural Simulation Staff Engineer, Packaging Engineering, Structural Simulation

Sandisk

Full Time

Batu

Responsible for influencing package and product design by addressing the structural integrity and reliability issues in particular and advancing the technology of semiconductor packaging in general. The scope is to address all mechanical aspects of packaging technology and associated material and process interactions. The focus will be on solutions to meet increased demands for small form factor packages with thinner chips, denser interconnects, higher power, and higher reliability.
Responsible for the modeling and simulation, design of experiment, and testing, whichever comes first for best engineering practice, of mechanical responses of IC package and flash products including solid state drives.
This position will interface with package & product design, electrical and physical characterization, reliability testing, failure analysis, assembly R&D and other process teams. ...

Posted

4 days ago

Senior Engineer, Packaging Engineering (FIB) Senior Engineer, Packaging Engineering (FIB)

Sandisk

Full Time

Batu

Develop and maintain package recipe and process baselines based on FA findings.
Collaborate with fab process, package design, assembly R&D, and characterization teams.
Evaluate package reliability and robustness in response to fab process changes. ...

Posted

23 days ago

Senior Staff Packaging Engineering Senior Staff Packaging Engineering

Sandisk

Full Time

Batu

Serve as the Package Engineering representative on cross functional leadership teams, setting technical direction and ensuring packages are fully characterized, qualified, and released to production on schedule while meeting stringent mechanical, electrical, performance, reliability, and quality requirements.
Provide end to end ownership of the package lifecycle across design, development, qualification, and manufacturing, driving alignment among cross functional engineering teams, global factories, and key stakeholders.
Lead global engagement with factories and contract manufacturers to enable robust, scalable, and cost effective high volume introduction of new package designs and advanced assembly processes. ...

Posted

17 days ago

Process Engineer Process Engineer

Sandisk

Full Time

Batu

Responsible for the Underfill (UF) process for flip-chip die-level assembly.
Support Assembly Process Engineering in delivering process and equipment solutions that meet quality, development, and operational requirements.
Maintain assembly yield and assembly test yield related to the Underfill process in line with department targets and KPIs, including lot bracketing and disposition. ...

Posted

3 days ago

PPD Engineer PPD Engineer

Camfil Asia Pacific

Full Time

Batu Gajah

Assist the management team on matters related to the department.
Work closely with the Costing team to support customer inquiries and test new products and processes
Support the Production team pertaining to product and process development matters ...

Posted

14 days ago

Technician Manufacturing Equipment Technician Manufacturing Equipment

Sandisk

Full Time

Batu

Ensure production machine performance is well maintain.
Assist process/equipment engineers to carry out or setup new device evaluation / engineering run when needed.
Practice 6’s every time after maintenance/repairing /conversion ...

Posted

14 days ago

Senior Packaging Engineer Senior Packaging Engineer

Sandisk

Full Time

Batu

Conduct comprehensive commonality analyses across product design, processes, machinery, materials, and measurement methodologies. Facilitate cross-functional collaboration to execute Root Cause Corrective Action (RCCA) initiatives with maximum efficacy.
Design and implement rigorous engineering Design of Experiments (DOEs) and apply advanced statistical analysis methods for complex problem-solving and data-driven decision-making processes.
Execute thorough factory Design for Mechanical Assembly and Automation (DFMA) evaluations for Solid-State Drive (SSD) assembly through meticulous examination of Design Packages, including design concepts, tolerance stack-up analyses, and Design Failure Mode and Effects Analysis (DFMEA). Actively participate in the design of machines and fixtures to enable optimal process performance. ...

Posted

15 days ago

Associate Equipment Development Engineer Associate Equipment Development Engineer

Sandisk

Full Time

Batu

Ensure that test equipment is functioning optimally, achieving >99.3% slot-on availability and maintaining a high first pass yield.
Perform routine maintenance, calibration, and troubleshooting of test systems to minimize downtime and ensure high reliability.
Monitor real-time and historical data to detect issues, reduce failures, and maximize equipment uptime. ...

Posted

3 days ago

Associate Equipment Development Engineer Associate Equipment Development Engineer

Sandisk

Full Time

Batu

Machine troubleshooting and perform preventive maintenance.
Documents (FMEA/Training material /SOP/WI) generation, update and preventive maintenance.
Line abnormal, quality issue, yield loss investigation and in time action taken. ...

Posted

3 days ago

Senior Electrical Hardware Engineer Senior Electrical Hardware Engineer

Haemonetics

Full Time

Batu

Lead electrical engineering activities for product development and enhancements
Work closely with Malaysia & Boston R&D Team on design, problem solving, and technical direction
Partner with suppliers and contract manufacturers in the region ...

Posted

6 days ago

Advanced Lab Technician Advanced Lab Technician

Sandisk

Full Time

Batu

Maintain reliability test equipment and chambers, ensuring smooth operation and minimal downtime.
Perform basic troubleshooting and 1st-level recovery for equipment and tester issues.
Support equipment setup, buyoff, and verification for new tools and reliability testers. ...

Posted

17 days ago

Process Engineer Process Engineer

Sandisk

Full Time

Batu

Excursion Management: Lead excursion issue, collaborate with all cross functional team and follow up on issue/excursion closure. Perform line audit to ensure production line compliances.
Yield Management: Oversee overall yield management for specific products, covering both assembly and test processes to ensure optimal performance and quality.
Commonality Analysis: Coordinate cross-functional teams to perform commonality analysis by product design, process, machine, material, and measurement to identify root causes of issues and develop effective improvement plans. ...

Posted

23 days ago

Supplier Development and Quality Engineer Supplier Development and Quality Engineer

VAT Group AG

Full Time

Batu

Monitor and improve supplier quality performance through KPI tracking and regular reviews.
Execute end to end supplier qualification process from technical feasibility review to process capability validation and production readiness audits
Lead supplier audits, assessments, and qualification activities. ...

Posted

7 days ago

Senior Product Development Engineer Senior Product Development Engineer

Sandisk

Full Time

Batu

Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability. ...

Posted

8 days ago

Staff Product Development Engineer Staff Product Development Engineer

Sandisk

Full Time

Batu

Act as the primary technical owner for product performance in High Volume Manufacturing.
Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline. ...

Posted

8 days ago

Equipment Maintenance - Preventative Maintenance Technician Equipment Maintenance - Preventative Maintenance Technician

Sandisk

Full Time

Batu

Sustain COP equipment (AOI, Mimaki, Lidding, Oven, Labeling & Auto Packing machine uptime above the targeted goals.
Troubleshoot and repair equipment to ensure smooth production operations.
Complete all scheduled Preventive Maintenance (PM) activities and equipment conversions within the stipulated time. ...

Posted

7 days ago

Technician 1, Manufacturing Equipment Maintenance Technician 1, Manufacturing Equipment Maintenance

Sandisk

Full Time

Batu

Perform routine inspections and preventive maintenance on manufacturing equipment
Diagnose and troubleshoot mechanical, electrical, and pneumatic issues, experience in automation equipment such as ARV, ARS and turn table are an advantage
Repair or replace faulty components and parts as needed ...

Posted

8 days ago

Technician 1, Manufacturing Equipment Maintenance Technician 1, Manufacturing Equipment Maintenance

Sandisk

Full Time

Batu

Perform routine inspections and preventive maintenance on manufacturing equipment
Diagnose and troubleshoot mechanical, electrical, and pneumatic issues, experience in automation equipment such as ARV, ARS and turn table are an advantage
Repair or replace faulty components and parts as needed ...

Posted

8 days ago

Technician 1, Manufacturing Equipment Maintenance Technician 1, Manufacturing Equipment Maintenance

Sandisk

Full Time

Batu

Perform routine inspections and preventive maintenance on manufacturing equipment
Diagnose and troubleshoot mechanical, electrical, and pneumatic issues, experience in automation equipment such as ARV, ARS and turn table are an advantage
Repair or replace faulty components and parts as needed ...

Posted

8 days ago

Technician 1, Manufacturing Equipment Maintenance Technician 1, Manufacturing Equipment Maintenance

Sandisk

Full Time

Batu

Perform routine inspections and preventive maintenance on manufacturing equipment
Diagnose and troubleshoot mechanical, electrical, and pneumatic issues, experience in automation equipment such as ARV, ARS and turn table are an advantage
Repair or replace faulty components and parts as needed ...

Posted

8 days ago

Technician 1, Manufacturing Equipment Maintenance Technician 1, Manufacturing Equipment Maintenance

Sandisk

Full Time

Batu

Perform routine inspections and preventive maintenance on manufacturing equipment
Diagnose and troubleshoot mechanical, electrical, and pneumatic issues, experience in automation equipment such as ARV, ARS and turn table are an advantage
Repair or replace faulty components and parts as needed ...

Posted

8 days ago