F&b Jobs in Kulim - July 2026 - Urgent Hiring

Showing 25 jobs results for "f&b" in Kulim
Never miss any updates for F B jobs in Kulim
Up to MYR3,500 Per Month
  • Communicate effectively with restaurant team at all time

Be an early applicant!

Posted
4 months ago
Up to MYR2,500 Per Month
  • Communicate effectively with restaurant team at all time

Be an early applicant!

Posted
4 months ago
MYR8,000 - MYR8,000 Per Month
  • Act as first point of contact for employee shared services and HR support
  • Implement and maintain recruitment, selection, and hiring processes for direct labour
  • Administer HR programs; serve as resource for employees and leaders ...
Posted
11 days ago
MYR8,000 - MYR8,000 Per Month
  • Act as first point of contact for employee shared services and HR support
  • Implement and maintain recruitment, selection, and hiring processes for direct labour
  • Administer HR programs; serve as resource for employees and leaders ...
Posted
11 days ago
MYR2,500 - MYR3,500 Per Month
  • Prepare cost estimates, BOQs, and tender documents for process utility works (CDA, PCW, PVAC, N2, PEX and etc.).
  • Measure and value completed works for progress claims and interim payments.
  • Review and evaluate subcontractor/vendor quotations against scope. ...
Posted
8 days ago

AGENSI PEKERJAAN VERSATILE RISING SDN BHD

MYR2,200 - MYR3,500 Per Month
  • Operate and monitor boiler, air compressor, bag filter, chimney, clean room, and gas equipment.
  • Check equipment performance and adjust settings for optimal efficiency.
  • Perform routine inspection and preventive maintenance. ...
Posted
6 days ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
5 days ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
5 days ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
5 days ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
5 days ago

Menicon Malaysia Sdn. Bhd.

Undisclosed
  • Operating and maintaining boilers, air compressor, bag filter & gas related equipment used in the manufacturing process to ensure continuous and efficient production.
  • Monitoring boilers, air compressor, bag filter, chimney, clean room & gas related equipment performance and parameters regularly, making adjustments to achieve optimal efficiency.
  • Conducting routine inspections and preventive maintenance to prevent downtime and equipment failures. ...
Posted
a month ago

MENICON MALAYSIA SDN. BHD.

Undisclosed
  • Operating and maintaining boilers, air compressor, bag filter & gas related equipment used in the manufacturing process to ensure continuous and efficient production.
  • Monitoring boilers, air compressor, bag filter, chimney, clean room & gas related equipment performance and parameters regularly, making adjustments to achieve optimal efficiency.
  • Conducting routine inspections and preventive maintenance to prevent downtime and equipment failures. ...
Posted
a month ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
a month ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
a month ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
a month ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
a month ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
a month ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
a month ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
a month ago
Undisclosed
  • Should able to working inside fabrication area during working hour
  • Intern for Lithography Process Sustaining Engineer
  • CGPA must be at least 3.00 and above
Posted
a month ago
Undisclosed
  • To support SEM Automation project
  • Assist the team for sample preparation, SEM jobs, collection of wafers/parts/from warehouse
  • Final year Degree student in Materials/mechanical/Electric electronics Engineering ...
Posted
a month ago
Undisclosed
  • Operating and maintaining boilers, air compressor, bag filter & gas related equipment used in the manufacturing process to ensure continuous and efficient production.
  • Monitoring boilers, air compressor, bag filter, chimney, clean room & gas related equipment performance and parameters regularly, making adjustments to achieve optimal efficiency.
  • Conducting routine inspections and preventive maintenance to prevent downtime and equipment failures. ...
Posted
a month ago
Undisclosed
  • Perform process engineering and production support in one selected assigned area of semiconductor process.
  • Work as a team between engineers from Manufacturing/Equipment/Technology/Quality to resolve production related quality issues in order to reduce production line disruptions.
  • Support tools installations as well as process & technology transfers to meet company targets, following standard process & tool release business flow. ...
Posted
18 days ago
Undisclosed
  • ams OSRAM Opto Semiconductors in Kulim, Malaysia, is seeking an experienced Industrial Engineering leader to optimize production performance. You will guide end-to-end improvement projects, benchmark processes, and drive adoption of productivity standards across multiple fabrication sites.
  • The role requires a Master in Industrial Engineering or related field, 8+ years in semiconductor frontend manufacturing, and proven ability to lead cross-functional teams, using OEE, IEE, Time & Motion
Posted
2 days ago

MENICON MALAYSIA SDN. BHD.

Undisclosed

Kulim Hi-Tech Park

  • Operating and maintaining boilers, air compressor, bag filter & gas related equipment used in the manufacturing process to ensure continuous and efficient production.
  • Monitoring boilers, air compressor, bag filter, chimney, clean room & gas related equipment performance and parameters regularly, making adjustments to achieve optimal efficiency.
  • Conducting routine inspections and preventive maintenance to prevent downtime and equipment failures. ...
Posted
a day ago

Job searches related to “F B”