Quality Engineer Jobs in Bayan Lepas - September 2026 - Urgent Hiring

Showing 61 jobs results for "quality engineer" in Bayan Lepas
Never miss any updates for Quality Engineer jobs in Bayan Lepas
  • To overasee equipment preventive maintenance as per schedule
  • In charge equipment form factor conversion, set-up and buyoff
  • Continuous improvement projects ...
Posted
3 days ago
  • Lead time and motion studies, establish standard times, and drive cycle time reduction initiatives across production lines.
  • Perform advanced line balancing, manpower optimization, and resource planning to maximize throughput and minimize waste.
  • Develop, maintain, and enhance capacity models to support strategic production planning, capital expenditure justification, and long-term site roadmaps. ...
Posted
6 days ago
  • To overasee equipment preventive maintenance as per schedule
  • In charge equipment form factor conversion, set-up and buyoff
  • Continuous improvement projects ...
Posted
13 days ago
  • To overasee equipment preventive maintenance as per schedule
  • In charge equipment form factor conversion, set-up and buyoff
  • Continuous improvement projects ...
Posted
14 days ago
  • Analyze existing workflows and identify opportunities to automate or digitize processes
  • Design and implement digital systems (e.g., dashboards, workflow tools, integrations)
  • Work with stakeholders to map business requirements into technical solutions ...
Posted
14 days ago
  • Vitrox AOI Inspection Systems
  • KED Flux Cleaning Systems
  • Escal Flux Cleaning Systems ...
Posted
14 days ago
  • To overasee equipment preventive maintenance as per schedule
  • In charge equipment form factor conversion, set-up and buyoff
  • Continuous improvement projects ...
Posted
14 days ago
  • To overasee equipment preventive maintenance as per schedule
  • In charge equipment form factor conversion, set-up and buyoff
  • Continuous improvement projects ...
Posted
17 days ago
  • Develop Post Sputter Engineering processes, with a focus on lubrication and tape polish.
  • Qualify new processes by conducting evaluations, collecting data, and interpreting results using statistical tools.
  • Participate in and lead Post Sputter Engineering activities within New Product Introduction (NPI) task forces. ...
Posted
19 days ago
  • Industrialize Engineering Concept and coordinate Engineering Execution work packages from Implementation Release through Team Release phases.
  • Design, develop, and organize testing/verification/validation of the product based on requirements.
  • Execute tests, evaluate results against defined criteria, and deliver complete documentation and final reports using state-of-the-art test methods. ...
Posted
23 days ago
  • Lead time and motion studies, establish standard times, and drive cycle time reduction initiatives across production lines.
  • Perform advanced line balancing, manpower optimization, and resource planning to maximize throughput and minimize waste.
  • Develop, maintain, and enhance capacity models to support strategic production planning, capital expenditure justification, and long-term site roadmaps. ...
Posted
a month ago
  • Monitor and maintain quality performance for FOL and EOL semiconductor processes.
  • Analyze process and product defects and drive effective corrective and preventive actions.
  • Conduct Root Cause Analysis (RCA) and support problem-solving activities using 8D, 5 Why, Fishbone, and other quality tools. ...
Posted
23 days ago
  • Able to use measuring equipment (eg. CMM, Vision System, hardness tester, roughness tester, roundness tester, tensile strength machine, caliper, micrometer, profile projector, multi-meter & etc) as well as metrology, Geometric Dimensioning & Tolerancing.
Posted
23 days ago

ASE Semiconductor (Penang) Sdn Bhd

  • Assist engineers in daily engineering activities and project execution.
  • Support process improvement, troubleshooting, and problem-solving initiatives.
  • Collect, analyze, and interpret engineering data and prepare reports. ...
Posted
14 days ago

In-Tech Electronics

  • Perform Inspection & ensure process / line compliance.
  • Daily reporting.
  • Comply to operations control and work procedures related to Environmental and Occupational Safety and Health Management Systems ...
Posted
23 days ago
  • Perform inspections and ensure process/line compliance.
  • Prepare daily reports.
  • Comply with operational controls and work procedures related to Environmental and Occupational Safety & Health Management Systems. ...
Posted
a month ago
  • Conduct inspection on returned FG (Media, Bag, Carton, or Pallet) and ad-hoc impacted FG, with accurate disposition and documentation per quality standards.
  • Perform Out-of-Box (OBA) Audits on FG to verify packaging integrity, labeling, and product conformance prior to shipment.
  • Execute FG Archive activities per established retention and traceability procedures. ...
Posted
8 days ago
  • WD thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution.
Posted
a month ago
  • Execute Radio Frequency Performance Test Cases for 2G/3G/4G/5G/BT/Wi-Fi Products.
  • Execute power consumption, audio, EMC, signal integrity test cases.
  • Execute the use case testing for the producible categories of 2G/3G/4G/5G/BT/WIFI product. ...
Posted
14 days ago

NEXUSTEST TECHNOLOGY SDN BHD

  • Equipment Operation & Maintenance: Proficiently operate ICT testing machines, functional test fixtures, and automated testing equipment. Perform daily inspections and basic preventive maintenance.
  • Product Testing: Execute testing procedures according to work instructions and accurately determine test results as “Pass” or “Fail.”
  • Initial Troubleshooting: Conduct preliminary analysis on failed products to identify whether issues are caused by product defects or testing equipment/program problems, and report according to established procedures. ...
Posted
7 days ago
  • Major in computer, communication, electronic information or related
  • Previous experience in embedded software testing roles.
  • Knowledge of basic Testing concepts. ...
Posted
7 days ago
  • Understanding the product functionality and internal circuitry.
  • Understanding the important parameters in product testing and how test measurements are performed.
  • Understanding the basic design process workflow. ...
Posted
9 days ago
  • Oversee plant-wide QA activities including IQC, IPQC, OQC and process audits.
  • Manage customer quality requirements, complaints and timely 8D / CLCA responses.
  • Work with suppliers to improve incoming quality performance. ...
Posted
12 days ago
  • Work and interact with a wide variety of NI staff in R&D software and hardware organizations, as well as employees from other business groups, in Austin, Texas, Debrecen, Hungary and Penang, Malaysia.
  • Validate automated test solutions (using Gage R & R, as well as other methods) for the manufacture of test and measurements instruments and hold required reviews to assure test system readiness for product release.
  • Full ownership of test solutions after deployment on production floor. Ensure test solutions owned are in good condition and readily available for NI Operations and Services. ...
Posted
18 days ago

In-Tech Electronics

  • Responsible for repairs / troubleshooting of mechanical and electrical assemblies within the manufacturing operation.
  • Troubleshoots and repairs complex mechanical and electrical assemblies used in equipment to the component level.
  • Operates electronic test equipment such as oscilloscopes and special tests as required. ...
Posted
19 days ago

Leadman Precision Engineering Sdn Bhd

  • Maintaining the quality assurance records and execution of periodic inspection on job.
  • Work with internal & external parties to resolve quality issues that arise as quickly as possible.
  • Ensure control plans and associated documentation are implemented effectively. ...
Posted
21 days ago

Eng Teknologi Sdn Bhd

  • Perform incoming, in-process, and final inspections according to approved procedures and specifications.
  • Record inspection results accurately in checklists or inspection reports.
  • Identify non-conformities and escalate to relevant departments for corrective action. ...
Posted
23 days ago

Srpailabs.com

  • Perform product inspections according to quality requirements.
  • Conduct incoming and in-process quality checks.
  • Identify defects, non-conformities and quality issues. ...
Posted
23 days ago
  • PROCESS OPTIMIZATION: Assist the CI Engineers in general projects and experiments that reduce costs and improve the manufacturing flow of products
  • Able to work cooperatively in a team & cross functional team(s) as needed Able to maintain a level temperament in a stressful environment Openly and proactively shares information, knowledge & experience with co-workers Willing to take on additional assignments
  • PROCESS OPTIMIZATION: Perform time studies, cap model as needed to demonstrate the expected output for an operation, for cost recovery systems, and for factory layouts. All t support Value Stream Transformation and Transformation Cost Improvement work. ...
Posted
a month ago

IN-TECH ELECTRONICS

  • Responsible for the tester maintaining, repairing, and spare parts management.
  • Prepare master maintenance, calibration schedule, perform predictive and preventive maintenance
  • To handle spare parts management or tester repair and services. ...
Posted
a month ago