Cbs Jobs in Kedah - October 2026 - Urgent Hiring - Page 45

Showing 1,922 jobs results for "cbs" in Kedah
Never miss any updates for Cbs jobs in Kedah
  • Assist EHS Team to perform our routine job
  • Bachelor's Degree
  • CGPA must be at least 3.00 and above
Posted
16 days ago
  • Support lots’ assessment & disposition to ensure quality of products delivered to customers meet Infineon’s quality and reliability standard.
  • Support new product releases, Support Production tools releases(PCRB), technology transfer projects and ramp up production of new technologies.
  • Support deviation management fast feedback to production with accurate analysis and conclusion. ...
Posted
16 days ago
  • assist engineer on daily routine task such as check product quality,machine alarm reduction, machine recovery
  • assist engineer on engineering data collection
  • assist engineer on report and engineering activity ...
Posted
16 days ago
  • Generate Fab MNT KPI report.
  • Drive module reps to achieve MNT KPI.
  • Analyse and present the KPI report during regular meetings. ...
Posted
16 days ago
  • Support on defect baseline improvement.
  • Defect pareto including defect characterization and kill ratios study.
  • Support lots’ assessment & disposition to ensure quality of products delivered to customers meet Infineon’s quality and reliability standard. ...
Posted
16 days ago
  • Hands-on troubleshoot and repair equipment failures, implement corrective action & preventive actions.
  • Recommend solutions to moderate problems with information.
  • Contribution to continuous improvement programs via initiating & executing projects to improve Overall Equipment Efficiency, OEE in term of Speed, Cost & Quality. ...
Posted
16 days ago
  • Initiate/lead yield and quality improvement programs within PMX Lots’ assessment & disposition to ensure quality of products delivered to customers meet Infineon’s quality and reliability standard
  • Fast feedback to production line in case of deviation, problem identification and fast feedback
  • Identify product or technology, or process margin related problem and work with PI/UPS to resolve ...
Posted
16 days ago
  • Develop, implement, and manage the Kulim site Internal Communications Plan in alignment with organizational goals, strategic priorities, and business objectives.
  • Support communication initiatives that contribute to site KPIs, employee engagement, and organizational effectiveness.
  • Partner with site leadership and management teams to develop clear, impactful, and consistent key messages for employees and relevant stakeholder groups. ...
Posted
16 days ago
Posted
16 days ago
  • Provide line support for equipment setup, recovery and corrective maintenance to meet KPIs defined in respective functional area
  • Perform Preventive Maintenance (PM) and complete Perform Preventive Maintenance documentation as required (e-checklist & TECO)
  • Ensure the compliance to 5S, Cleanroom and Safety Protocol ...
Posted
16 days ago
  • Initiate/lead yield/Inline/PCM/DD and quality improvement programs
  • Lots’ assessment & disposition to ensure quality of products delivered to customers meet Infineon’s quality and reliability standard
  • Investigate, identify and provide fast feedback to production line incase of PCM/Inline/DD trend deviation/drift ...
Posted
16 days ago
  • Perform up to medium level of Discrete and IC FA including electrical verification and fault isolation on package and wafer samples.
  • Perform sample preparation and microscopy inspection for clear visualization of package and wafer level defects
  • Prepare FA reports that can lead to root cause finding and corrective action to cross functional team. ...
Posted
16 days ago
  • Own and lead technology process integration strategy across the manufacturing flow
  • Define and optimize critical process integration schemes to achieve performance, quality, reliability, and cost objectives
  • Drive process stability, manufacturability, yield enhancement, and long-term sustainability of manufacturing processes. ...
Posted
16 days ago
  • Define test concepts and perform test simulations to ensure the robustness of the test solution
  • Design test hardware for automated test equipment (ATE)
  • Code and debug test programs ...
Posted
17 days ago
  • Perform IC (functional) Failure Analysis [FA] on wafer and package level starting from electrical verification, fault isolation and physical root cause analysis.
  • Prepare FA reports that can lead to root cause finding and corrective action to cross functional team. Participate, lead and present FA results in cross functional meetings, projects, yield improvement, urgent and important meetings.
  • FA equipment / tool ownership. ...
Posted
17 days ago
  • Perform process engineering and production support in one selected assigned area of semiconductor process (Metrology).
  • Work as a team with manufacturing/ maintenance/ technology/quality to resolve production and quality issues and reduce production line disruptions.
  • Support tool installations, process & technology transfers to meet company targets, following standard process & tool release business flow. ...
Posted
17 days ago
  • Perform process transfer, process development, optimization and qualification for technology transfer and/or used tool transfer.
  • Development of innovative processes and process characterization methodologies for existing and new technologies.
  • Partnering with production module/department, technology integration, planning, business divisions and global process development counter parts in mapping and enabling future technologies. ...
Posted
17 days ago
  • Perform routine Preventive maintenance (PM) and troubleshooting for more than single functional area
  • Perform standard calibration on the Preventive maintenance equipment
  • Fill up PM documentation as required (eg e-checklist, TECO) ...
Posted
17 days ago
  • Develop innovative test methods including DfT and optimize testsoftware for the ATE (Automated Test Equipment).
  • Design product specific test hardware for Front End wafer test and Back End final test.
  • Analyze, debug and characterize new products on the test system. ...
Posted
17 days ago
  • Unit Process Engineer for Wafer Inspection Process
  • As a tool owner, monitor the tool stability, set up a new tool, improve the tool capability
  • As a system owner ...
Posted
17 days ago
  • To meet KPI target for DCVD Equipment (Eq. AMAT Producer SE, UltimaHDP, Centura DXZ)
  • Optimization existing DCVD equipment Uptime, Speed, cost & Quality
  • Perform Periodic Maintenance (PM) according to plan and improve PM success rate ...
Posted
17 days ago
  • Perform routine Preventive Maintenance (PM) for multiple functional area
  • Perform standard calibration on the Preventive Maintenance equipment
  • Fill up Preventive Maintenance documentation as required (eg e-checklist, TECO) ...
Posted
17 days ago
  • Robot and Mechanical Parts Repair
  • Expertise in perform troubleshooting and repair of wafer handling robots and mechanical assemblies
  • Diagnose robot mechanical failures, abnormal vibration, positioning errors and wear related issues ...
Posted
17 days ago
  • Provide line support for equipment setup, recovery and corrective maintenance to meet KPIs defined in respective functional area
  • Perform Preventive Maintenance (PM) and complete PM documentation as required (e-checklist & TECO)
  • Ensure the compliance to 5S, Cleanroom and Safety Protocol Support the Tools installation as being required Troubleshoot equipment failures, identify root cause and perform corrective action to bring equipment's up to support production/Plan and execute projects to improve Overall Equipment Efficiencies (Speed/Cost/Quality) ...
Posted
17 days ago
  • Supporting production test of circuit cards on ICT and Flying Probe test platforms
  • Interpreting test requirements and documenting test procedures.
  • Analyzing data to identify to root cause. ...
Posted
17 days ago
  • Provide superior customer service to walk-in customers and contribute to expected levels of CSAT (Customer Satisfaction) scores and Mystery Shopping Results;
  • Carry clear targets for specific products – CASA and FD Book growth and account opening, cross selling of PL, Credit Cards, Portfolio Sales and ASBF Funding and any other product as deemed fit for Branch Ops;
  • Learn and use I-Pads/other devices (if applicable to branch) for customer service/ cross selling; ...
Posted
17 days ago
  • Initiate/lead yield/Inline/PCM/DD and quality improvement programs with (PMX) Process Integration and product Engineering group
  • Lots’ assessment & disposition to ensure quality of products delivered to customers meet Infineon’s quality and reliability standard
  • Investigate, identify and provide fast feedback to production line incase of PCM/Inline/DD trend deviation/drift ...
Posted
17 days ago
  • Support Yield stability & improvement within the scope of technology ownership and within PMX Ensure quality and reliability of delivered products meeting IFX quality standard (Lot assessment/FMEA)
  • Support of New product releases and volume production Initiate/lead yield and quality improvement programs
  • Lots’ assessment & disposition to ensure quality of products delivered to customers meet Infineon’s quality and reliability standard ...
Posted
17 days ago
  • Inspect, troubleshoot and repair all plant mechanical equipment as directed by superior.
  • Make periodic inspections of plant equipment and report its condition to the supervisor for further evaluation.
  • Regularly communicate interdepartmentally on the status of jobs, projected completion time, and the need (if any) for assistance. ...
Posted
17 days ago
  • Conduct cycle time studies and evaluate current operational processes.
  • Collect, organize, and analyze production and workflow data to identify trends and improvement opportunities.
  • Support routing analysis and recommend improvements to enhance operational efficiency. ...
Posted
18 days ago