For Employers - Post Jobs
Contact Us
Jobs
Companies
Forums
Engineer Internship Jobs in Pulau Pinang - September 2026 - Urgent Hiring
Showing 2,599 jobs results for
"engineer internship"
in Pulau Pinang
Never miss any updates for Engineer Internship jobs in Pulau Pinang
Manage Alert
MYR7,000 - MYR9,000 Per Month
George Town
- Supervise all electrical installation works on site.
- Ensure works are carried out according to approved drawings, specifications, and contract requirements.
- Monitor contractor performance, workmanship, and compliance with project quality standards. ...
Posted
25 days ago
Undisclosed
Malaysia
- Design, develop, and optimize embedded firmware using C for real-time power electronic applications.
- Develop startup code, linker scripts, interrupt service routines (ISR), and low-level hardware interfaces.
- Implement and maintain RTOS-based applications including task scheduling, synchronization mechanisms, queues, semaphores, and timers. ...
Posted
7 days ago
Undisclosed
- Candidates should possess strong skills in Test Development and Testing, including experience creating and validating test plans, procedures, and test coverage for semiconductor or electronic systems.
- Candidates should possess skills in Software Testing and Test Automation, such as developing automated test scripts, using test frameworks, and integrating automated tests into continuous improvement or production environments.
- Candidates should possess skills in Software Development related to test systems, including proficiency in programming languages commonly used for test platforms (e.g., C/C++, Python, or similar) and version control tools. ...
Posted
25 days ago
Undisclosed
George Town
- Design, build, and deploy automated test platforms for Cisco's global manufacturing partners.
- Develop robust test automation scripts using Python to streamline functional testing.
- Generate product-specific test plans and drive comprehensive test coverage based on product requirements. ...
Posted
25 days ago
Undisclosed
Malaysia
- Perform detailed electrical and physical failure analysis to isolate faults in memory devices.
- Hand-on advanced FA tools (SEM, FIB, nanoprobing, OBIRCH) for defect localization and characterization.
- Able to interpret circuit schematics and layouts for defect localization and collaborate with product or design engineers on complex cases. ...
Posted
23 days ago
Undisclosed
Malaysia
- Conduct synthesis and optimization of IP blocks.
- Perform linting to ensure code quality and adherence to design guidelines.
- Conduct CDC analysis to identify and address potential clock domain crossing issues. ...
Posted
16 days ago
Undisclosed
Bandar Perai Jaya
- Develop, maintain, and enhance interactive dashboards and reports using Power BI.
- Create automated reporting solutions to monitor key operational metrics, yield, productivity, quality, and manufacturing performance.
- Write, optimize, and maintain SQL queries, stored procedures, and scripts for data extraction, analysis, and reporting. ...
Posted
25 days ago
Undisclosed
Bandar Perai Jaya
- To provide technical support and data analysis on product related issues and product improvements (Cost and Yield).
- Handles new transceiver product transfers from NPI to mass volume production lifecycle.
- Prepares product engineering documentation and engineering related changes with related revision change. ...
Posted
25 days ago
Undisclosed
- Responsible for determining core aspects and success criteria for automation solutions in product manufacturing and assembly process. Drive projects in the area of production process automation for assembly solutions in co-operation with internal and external stake holder.
- Work closely with the global Center of Competence (CoC) and the related sub-CoC group.
- Assist in developing suitable strategies to execute governance over the core process within the area of regional responsibility defined for the BMI B Braun Technology Center- Asia Pacific (BTC-AP) in accordance with Operating Model Medical (OMM). ...
Posted
8 days ago
Undisclosed
- Candidates should possess strong skills in Test Engineering and Testing, with a focus on structured quality processes and defect management.
- Candidates should possess practical experience in Test Execution, including manual execution, result analysis, and test reporting.
- Candidates should possess the ability to design and maintain clear, reusable Test Cases aligned with business and technical requirements. ...
Posted
8 days ago
Undisclosed
George Town
- Lead new product introduction (NPI) activities, ensuring smooth product transfers from prototype to full-scale production.
- Develop, optimize, and validate manufacturing processes, assembly instructions (OMS), BOMs, and production documentation to improve quality and efficiency.
- Drive continuous improvement initiatives using Lean Manufacturing, Kaizen, 5S, JIT, Kanban, and Six Sigma methodologies to reduce cycle time and increase productivity. ...
Posted
a month ago
Undisclosed
- Responsible for managing customer quality issues.
- Defines and implements production part qualification requirements as a function of their thorough understanding of the Customer quality requirements
- Reports into Site Quality Head and supports operations team to understand Customer requirements ...
Posted
a month ago
Undisclosed
Malaysia
- Be a key coordinator and expert for PCM (Process Control Monitor)content definition, layouting, documentation, verification, test conditions tracking, change management for technologies at internal and external fabs
- Design, manage and own PCM configurations to support wafer technologies throughout their life-cycle efficiently and with the needed quality.
- Manage and maintain documentation of electrical parameter (EP) specs for wafer acceptance tests (WAT) ...
Posted
8 days ago
Undisclosed
Malaysia
- Support Quality Engineer in daily production quality activities.
- Perform in-process inspection and outgoing inspection when required.
- Monitor production line quality performance and report abnormalities. ...
Posted
13 days ago
Product Operations Engineer (Permanent Night Shift) Product Operations Engineer (Permanent Night Shift)
Wai Hong Brothers Sdn Bhd
MYR3,500 - MYR4,500 Per Month
- Support Configuration Services Project Managers in executing custom and complex customer projects.
- Review customer documentation and create project profiles in Financial Force (FF).
- Submit and track projects through engineering lifecycle. ...
Posted
8 days ago
Undisclosed
- Strong skills in Physical Design, including floorplanning, placement, CTS, routing, and timing closure for complex SoCs.
- Proficiency in Physical Verification, covering DRC, LVS, antenna checks, and reliability signoff at advanced technology nodes.
- Solid foundation in Logic Design and Circuit Design, with understanding of digital design fundamentals, clocking, and low-power techniques. ...
Posted
21 days ago
Undisclosed
- Technical skills in operating, monitoring, and maintaining semiconductor or industrial electronics equipment, including basic troubleshooting and repair.
- Ability to perform precise measurements, follow test procedures, and document results accurately using standard tools and software.
- Strong attention to detail, organizational skills, and the ability to follow established safety, quality, and cleanliness standards in a production environment. ...
Posted
a month ago
Undisclosed
- Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
- Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
- Conduct tester conversion buyoff, troubleshooting, and head changes as required ...
Posted
20 days ago
Undisclosed
- To provide technical support to the Contract Manufacturer for executing the assembly processes, ECN implementation, troubleshooting production issues to meet defined standards of quality and on-time delivery, materials form-fit qualification, and evaluation.
- To identify critical manufacturing and quality issues and driving the CM partner to closure.
- Teradyne's first point of contacts and escalation for process/assembly related issues and provide deviation authorization as were appropriate. ...
Posted
21 days ago
Undisclosed
George Town
- Experience with mechanical design and analysis skills including statics, dynamics, kinematics, strength of materials as well as stress and thermal analysis
- Detailed knowledge of common automation components (motors, bearings, gearboxes, pneumatics, gas and water components, frame types, sheet metal and other enclosure materials, etc.) is required
- Work closely with process development engineers to understand requirements and develop robust and reliable manufacturing process equipment. ...
Posted
a month ago
MYR2,100 - MYR3,000 Per Month
- Responsible for repairs / troubleshooting of mechanical and electrical assemblies within the manufacturing operation.
- Troubleshoots and repairs complex mechanical and electrical assemblies used in equipment to the component level.
- Operates electronic test equipment such as oscilloscopes and special tests as required. ...
Posted
25 days ago
MYR2,100 - MYR3,000 Per Month
- Responsible for repairs / troubleshooting of mechanical and electrical assemblies within the manufacturing operation.
- Troubleshoots and repairs complex mechanical and electrical assemblies used in equipment to the component level.
- Operates electronic test equipment such as oscilloscopes and special tests as required. ...
Posted
25 days ago
Undisclosed
Malaysia
- Troubleshoot hardware and root cause analog, digital, high speed optical, and RF issues to module and component level.
- Identify common HW failure patterns, draft plans to address them and use data analysis tools to optimize and improve test methods and limits to help deliver quality products.
- Set up and perform RF and precision photonics measurements, such as compression (P1dB), phase noise, gain, spurious emissions, S parameter measurements, BER, eye diagrams, jitter, optical power, wavelength, extinction ratio, and related photonics metrics. ...
Posted
8 days ago
MYR5,500 - MYR7,000 Per Month
- Develop, establish, and optimize wafer dicing/sawing processes to meet product quality and yield requirements.
- Set up and optimize dicing process parameters, including spindle speed, cutting speed, blade selection, feed rate, cooling water, and cut depth.
- Monitor and improve process performance, yield, cycle time, and productivity. ...
Posted
16 days ago
MYR1,800 - MYR2,200 Per Month
Prai
- Additional leave
- Health insurance
- Opportunities for promotion ...
Posted
20 days ago
Undisclosed
Malaysia
- Responsible for managing customer quality issues.
- Defines and implements production part qualification requirements as a function of their thorough understanding of the Customer quality requirements
- Reports into Site Quality Head and supports operations team to understand Customer requirements ...
Posted
a month ago
Undisclosed
George Town
- Support production operations and issue investigations.
- Participate in troubleshooting and cross-functional escalations.
- Ensure operational stability and timely issue resolution. ...
Posted
9 days ago
MYR1,700 - MYR3,000 Per Month
Prai
- Perform laboratory test and monitoring the quality from raw materials received, processes during production until bulk tanker deliveries and ensuring products meeting the specifications, customer requirement and regulations.
- To perform laboratory test on samples received on daily basis.
- To prepare reports on daily basis. ...
Posted
13 days ago
Browse Location:
More Location
Browse Company:
More Companies
Browse "engineer internship" Job By:
Browse "engineer internship" Job By:
More Industries