Engineering Jobs in Bandar Perai Jaya - September 2026 - Urgent Hiring

Showing 36 jobs results for "engineering" in Bandar Perai Jaya
Never miss any updates for Engineering jobs in Bandar Perai Jaya

Bandar Perai Jaya

  • To assist the product engineer in terms of product family in achieving yield target; scrap cost target, debug accuracy target & lean projects eval.
  • Conduct schedule daily verification and path loss calibration to ensure optimal performance and measurement accuracy.
  • Participate in software and hardware installation for new tester setup and tester conversion. ...
Posted
15 hours ago

Bandar Perai Jaya

  • Review daily RBABot report and work with EOs/operators to assign out test verifications/retests and acquire tester allocation from production.
  • Review test data to determine any further retests are needed.
  • With guidance from PQE, analyze test data and send out email triggers to PEs for failures. ...
Posted
2 days ago

Bandar Perai Jaya

  • Perform routine inspection, operation, and maintenance of facilities systems, including electrical, mechanical, HVAC, plumbing, CDA, chilled water fire protection and cleanroom systems.
  • Attend to daily facilities issues, breakdowns, and corrective maintenance works.
  • Monitor system performance and record operating parameters. ...
Posted
10 days ago

Bandar Perai Jaya

  • Learn More
  • Help
  • Challenging, skill-building assignments ...
Posted
25 days ago

Bandar Perai Jaya

  • To assist the product engineer in terms of product family in achieving yield target; scrap cost target, debug accuracy target & lean projects eval.
  • Conduct schedule daily verification and path loss calibration to ensure optimal performance and measurement accuracy.
  • Participate in software and hardware installation for new tester setup and tester conversion. ...
Posted
23 days ago

Bandar Perai Jaya

  • Maintain and troubleshoot module testers to minimize equipment downtime.
  • Perform periodic tester DV, GR&R and SPC monitoring.
  • Support new tester setup, conversion and production readiness. ...
Posted
2 days ago

Bandar Perai Jaya

  • To establish a controlled fiber cable assembly process and document in the system.
  • Equipment Control and Preventive Maintenance.
  • Generate and implement VA's to guide production properly execute termination process and meet product specification. ...
Posted
3 days ago

Bandar Perai Jaya

  • Production line sustaining (e.g. Tester troubleshooting).
  • Perform preventive and corrective maintenance on test equipment.
  • Troubleshoot and repair test stations, automated test systems, and related hardware. ...
Posted
8 days ago

Bandar Perai Jaya

  • Maintain tester cleanliness by removing dust to prevent contamination on TOSA/ROSA modules.
  • Install and measure grounding systems to protect products from ESD (Electrostatic Discharge).
  • Inspect and test RCBO functionality to ensure proper tripping during electrical abnormalities. ...
Posted
8 days ago

Bandar Perai Jaya

  • Responsible for test board debug & testing
  • Liaise with board designer to debug test board issues
  • Maintain inventory control of electronic components and tools ...
Posted
2 days ago

Bandar Perai Jaya

  • Perform daily burn-in operations and provide equipment support for testing.
  • Operate and support Soak Test, Module Burn-In (Module BI), TC BERT, SHTOL, Temperature Cycling, Roadm, Temp Cycling and Traffic Test and processes.
  • Operate, monitor, inspect, and perform basic troubleshooting and preventive maintenance (PM) on burn-in chambers, ovens, and test equipment. ...
Posted
8 days ago

Bandar Perai Jaya

  • Review daily RBABot report and work with EOs/operators to assign out test verifications/retests and acquire tester allocation from production.
  • Review test data to determine any further retests are needed.
  • With guidance from PQE, analyze test data and send out email triggers to PEs for failures. ...
Posted
24 days ago

Bandar Perai Jaya

  • Maintain and troubleshoot module testers to minimize equipment downtime.
  • Perform periodic tester DV, GR&R and SPC monitoring.
  • Support new tester setup, conversion and production readiness. ...
Posted
23 days ago

Bandar Perai Jaya

  • Test Equipment Control & Maintenance
  • Establish and maintain tester capability and functionality.
  • Manage software revisions and tester configurations. ...
Posted
23 days ago

Bandar Perai Jaya

  • To provide technical support and data analysis on product related issues and product improvements (Cost and Yield).
  • Handles new transceiver product transfers from NPI to mass volume production lifecycle.
  • Prepares product engineering documentation and engineering related changes with related revision change. ...
Posted
24 days ago

Bandar Perai Jaya

  • Perform routine inspection, operation, and maintenance of facilities systems, including electrical, mechanical, HVAC, plumbing, CDA, chilled water fire protection and cleanroom systems.
  • Attend to daily facilities issues, breakdowns, and corrective maintenance works.
  • Monitor system performance and record operating parameters. ...
Posted
a month ago

Bandar Perai Jaya

  • Develop, maintain, and enhance interactive dashboards and reports using Power BI.
  • Create automated reporting solutions to monitor key operational metrics, yield, productivity, quality, and manufacturing performance.
  • Write, optimize, and maintain SQL queries, stored procedures, and scripts for data extraction, analysis, and reporting. ...
Posted
a month ago

Bandar Perai Jaya

  • Responsible for test board debug & testing
  • Liaise with board designer to debug test board issues
  • Maintain inventory control of electronic components and tools ...
Posted
23 days ago

Bandar Perai Jaya

  • Develop, implement, and continuously improve preventive maintenance (PM) programs for all production and test equipment.
  • Plan, schedule, and execute periodic preventive maintenance activities to ensure equipment reliability and minimize unplanned downtime.
  • Monitor equipment performance, analyze breakdown trends, and implement corrective and preventive actions to improve Overall Equipment Effectiveness (OEE). ...
Posted
19 days ago

Bandar Perai Jaya

  • Production line sustaining (e.g. Tester troubleshooting).
  • Perform preventive and corrective maintenance on test equipment.
  • Troubleshoot and repair test stations, automated test systems, and related hardware. ...
Posted
a month ago

Bandar Perai Jaya

  • Provide first level engineering support to contract manufacturer operation teams, troubleshooting process, equipment, and product issues in real time.
  • Support new product introductions and transfers for Optics and HDR products, including documentation review, capability assessments, and process/equipment qualifications.
  • Ensure adherence to Samtec control plans and standards, coordinating approval and implementation of process changes between Samtec and contract manufacturer. ...
Posted
a month ago

Bandar Perai Jaya

  • Design Test Tooling assemblies for Electrical Test First Time Build of cable assemblies.
  • Review the design of printed circuit boards and fixtures for Electrical Test of First Time Build of HDR cable product and feedback findings to designer.
  • Create Process Documentation for Electrical Test processes. ...
Posted
a month ago

Bandar Perai Jaya

  • Perform daily burn-in operations and provide equipment support for testing.
  • Operate and support Soak Test, Module Burn-In (Module BI), TC BERT, SHTOL, Temperature Cycling, Roadm, Temp Cycling and Traffic Test and processes.
  • Operate, monitor, inspect, and perform basic troubleshooting and preventive maintenance (PM) on burn-in chambers, ovens, and test equipment. ...
Posted
a month ago

Bandar Perai Jaya

  • Maintain tester cleanliness by removing dust to prevent contamination on TOSA/ROSA modules.
  • Install and measure grounding systems to protect products from ESD (Electrostatic Discharge).
  • Inspect and test RCBO functionality to ensure proper tripping during electrical abnormalities. ...
Posted
a month ago

Bandar Perai Jaya

  • Initiate projects related to product, process, quality systems, or yield improvement based on internal and external quality indicators.
  • Develop and implement systems that improve quality and ensure sustainable results, therefore driving continuous improvement.
  • Use advanced measurement tools, techniques, and test equipment and be able to understand and analyze results. ...
Posted
a month ago

Bandar Perai Jaya

  • Coordinate assigned PM tasks with manufacturing to minimize machine downtime while maintaining a minimum of 90% OTD.
  • Support Maintenance Supervisor or Engineering on projects related to equipment and/or equipment upgrades.
  • Occasionally perform light machining and basic electrical controls repairs. ...
Posted
a month ago

Bandar Perai Jaya

Posted
19 days ago

Bandar Perai Jaya

  • Perform daily burn-in operations and provide equipment support for testing.
  • Operate and support Soak Test, Module Burn-In (Module BI), TC BERT, SHTOL, Temperature Cycling, Roadm, Temp Cycling and Traffic Test and processes.
  • Operate, monitor, inspect, and perform basic troubleshooting and preventive maintenance (PM) on burn-in chambers, ovens, and test equipment. ...
Posted
a month ago

Bandar Perai Jaya

  • Responsible for overall equipment uptime in Front of Line machines & fixtures
  • Willing to work overtime when there is need to support operation or short of manpower
  • Responsible for spare parts tracking, replenishment, update ...
Posted
8 days ago

Bandar Perai Jaya

  • Responsible for overall equipment uptime in Front of Line machines & fixtures
  • Willing to work overtime when there is need to support operation or short of manpower
  • Responsible for spare parts tracking, replenishment, update ...
Posted
8 days ago

Browse "engineering" Job By:

Browse "engineering" Job By: