Jobs
Companies
Forums
Engineering Jobs in Gerbang Nusajaya - September 2026 - Urgent Hiring
Showing 58 jobs results for
"engineering"
in Gerbang Nusajaya
Never miss any updates for Engineering jobs in Gerbang Nusajaya
Manage Alert
MYR800 - MYR1,200 Per Month
Gerbang Nusajaya
- Support engineers in OMS (Operation Method Sheet) build and updates, including preparation of process steps and supporting images
- Assist in documenting and organizing manufacturing production processes and work instructions
- Maintain and update engineering tracking systems used to monitor engineering tasks, process readiness, and project status ...
Posted
a day ago
Allied Technologies Holdings
MYR700 - MYR700 Per Month
Gerbang Nusajaya
- Mechanical Engineering
- Manufacturing Engineering Technology
- Quality Assurance ...
Posted
17 days ago
MYR6,000 - MYR8,000 Per Month
Gerbang Nusajaya
- Health insurance
- Maternity leave
- Opportunities for promotion ...
Posted
22 days ago
Hirata FA Engineering (M) Sdn Bhd
MYR2,500 - MYR3,500 Per Month
Gerbang Nusajaya
- Wire hardness preparation, field wiring and installation job
- Operation box wiring and control panel wiring if shortage of manpower
- Doing I/O check with software engineer ...
Posted
a day ago
MYR6,000 - MYR8,000 Per Month
Gerbang Nusajaya
- Water-side equipment: Chillers, buffer tanks, chilled and condenser pump sets, cooling towers, sand filtration units, CDU, reticulation network, electrical panels
- Air-side equipment: CRAH, CRAC, Dehumidifiers, PAHU, ACSU, ducting, electrical panels
- Mechanical Systems: Ventilation fans, make-up water system, rainwater and domestic water pumps, electrical panels ...
Posted
22 days ago
MYR3,000 - MYR3,800 Per Month
Gerbang Nusajaya
- To perform analysis and report test result for in-coming, in-process and finished goods according to work instruction.
- To prepare chemical solution according to work instruction.
- To perform instrument calibration and verification in laboratory. ...
Posted
a day ago
MYR2,000 - MYR3,000 Per Month
Gerbang Nusajaya
- Follow production/process specifications monitors temperatures, forming , and related controls to ensure good quality of product be produced.
- Sets up machine and change the mold.
- Loads raw material into machine and unloads finished product. ...
Posted
4 days ago
Undisclosed
Gerbang Nusajaya
- Responsible for setup, maintaining, testing, adjusting, and supporting manufacturing machinery and machinery processes, which could include dies and molds. Will provide preventative maintenance on any problematic manufacturing issues and process equipment if necessary, as well as troubleshoot on a wide spectrum of tooling and production equipment
- Required Experience:
Posted
8 days ago
MYR3,800 - MYR5,000 Per Month
Gerbang Nusajaya
- Perform analysis and testing of polymer materials to ensure they meet the required specifications and regulatory standards.
- Improved productivity data collection and management.
- Exploratory and investigative data analysis. ...
Posted
8 days ago
Allied Technologies Holdings
MYR2,200 - MYR2,200 Per Month
Gerbang Nusajaya
- Setting-up on the NC bending machine.
- Verify accuracy of machine settings to confirm accurate tolerances and machine functions.
- Setup and operate Bending Machine with a high degree of proficiency. ...
Posted
8 days ago
Abeyaantrix Vox Sdn Bhd
MYR3,000 - MYR4,500 Per Month
Gerbang Nusajaya
- Assist in planning, coordinating and monitoring project and construction activities.
- Ensure works are carried out according to approved drawings, specifications, method statements and project requirements.
- Conduct site inspections and monitor the quality of works and materials. ...
Posted
17 days ago
MYR3,500 - MYR3,500 Per Month
Gerbang Nusajaya
- Review all customer documents, prints and specifications, to calculate the cost to provide a quote to the customers that will yield the maximum profitability and add value to the customer
- Ensure that all necessary customer information is obtained and verified to facilitate the generation of accurate quotations.
- Collaboration and coordination with SMEs (from Engineering, Manufacturing, Quality and SCM) as required to generate accurate and optimized quotes that meets C-Hawk targeted margins ...
Posted
17 days ago
MYR3,500 - MYR3,500 Per Month
Gerbang Nusajaya
- Review customer requirements, including engineering drawings and Bills of Materials (BOMs), to develop comprehensive cost models covering raw materials, labor, manufacturing cycle time, tooling, and overhead costs. Ensure all required customer information is obtained and verified to support accurate analysis.
- Evaluate manufacturing processes to identify cost reduction opportunities, suitable alternative materials, and efficiency improvements while ensuring product quality is maintained.
- Evaluate subcontractor and supplier quotations to ensure competitive component pricing and reliable material. ...
Posted
17 days ago
MYR4,500 - MYR4,500 Per Month
Gerbang Nusajaya
- Lead product technical ownership from RFQ/NPI stage until production handover, ensuring customer requirements, specifications, BOM, drawings, and revision controls are accurately translated into manufacturing execution.
- Review customer drawings, 3D models, specifications, and assembly requirements to identify technical risks, manufacturability concerns, tolerance stack-up issues, and material compatibility during quote and NPI stages.
- Coordinate and drive print & process review activities including print review, BOM validation, material selection, routing definition, clarification tracking, and technical alignment between customer, engineering, quality, and manufacturing teams. ...
Posted
17 days ago
MYR2,000 - MYR3,500 Per Month
Gerbang Nusajaya
- Follow production/process specifications monitors temperatures, forming , and related controls to ensure good quality of product be produced.
- Sets up machine and change the mold.
- Loads raw material into machine and unloads finished product. ...
Posted
17 days ago
MYR2,500 - MYR3,500 Per Month
Gerbang Nusajaya
- Perform preventive and corrective maintenance on automated equipment.
- Troubleshoot PLCs, HMIs, SCADA systems, sensors, drives, and instrumentation.
- Diagnose electrical, mechanical, and control system faults. ...
Posted
17 days ago
MYR3,500 - MYR3,500 Per Month
Gerbang Nusajaya
- Develop, formulate and improve chemical formulations, coatings, adhesives, laminates and related materials used in insulation and building membrane products.
- Conduct laboratory testing and evaluation of raw materials, in-process materials and finished products.
- Monitor and control chemical parameters to ensure product consistency and quality. ...
Posted
18 days ago
Allied Technologies Holdings
MYR2,000 - MYR2,000 Per Month
Gerbang Nusajaya
- Setting-up on the NC bending machine.
- Verify accuracy of machine settings to confirm accurate tolerances and machine functions.
- Setup and operate Bending Machine with a high degree of proficiency. ...
Posted
17 days ago
MYR3,000 - MYR5,000 Per Month
Gerbang Nusajaya
- Set up and operate converting equipment by following established work procedures and instructions.
- Read and understand converting customer specifications.
- Mount plate, dies and secure assemblies in bed of machine. ...
Posted
8 days ago
MYR3,000 - MYR4,500 Per Month
Gerbang Nusajaya
- Water-side equipment: Chillers, buffer tanks, chilled and condenser pumpsets, cooling towers, sand filtration units, CDU, reticulation network, electrical panels
- Air-side equipment: CRAH, CRAC, Dehumidifiers, PAHU, ACSU, ducting, electrical panels
- Mechanical Systems: Ventilation fans, make-up water system, rainwater and domestic water pumps, electrical panels ...
Posted
22 days ago
Undisclosed
Gerbang Nusajaya
- To analyse the data collection and established trends to monitor any abnormality.
- To ensure continuous smooth Operation of Plant Facilities infra services. Ensuring Zero ITP and Zero incidents to meet Service Provider KPI.
- To attend to and manage any complaint and breakdown related to the system. To follow up with action for containment, preventive and corrective and prepare a full report on the incident to the Client. ...
Posted
22 days ago
Undisclosed
Gerbang Nusajaya
- Health insurance
- Opportunities for promotion
- Professional development ...
Posted
22 days ago
MYR3,000 - MYR4,500 Per Month
Gerbang Nusajaya
- Power Distribution Systems: LV panels, switchboards, busbars, circuit breakers, MCCBs, isolators
- Critical Power Equipment: UPS systems, battery banks, PDUs, ATS, STS
- Lighting & Small Power Systems: Emergency lighting, general lighting circuits, sockets ...
Posted
22 days ago
MYR2,200 - MYR2,200 Per Month
Gerbang Nusajaya
- Monitors jobs to insure quality and compliance with job standards.
- Oversees inspection and maintenance of rides and equipment.
- Performs duties of specific trades when necessary. ...
Posted
3 days ago
MYR4,000 - MYR6,000 Per Month
Gerbang Nusajaya
- Plan, supervise and monitor construction activities to ensure work is completed according to drawings, specifications and project requirements.
- Coordinate with Project Managers, consultants, subcontractors and site teams to ensure smooth project execution.
- Review and monitor technical drawings, method statements, work programmes and project specifications. ...
Posted
17 days ago
MYR3,500 - MYR3,500 Per Month
Gerbang Nusajaya
- Lead and execute PPAP activities including drawing review, BOM verification, specification validation, manufacturability review, and technical risk assessment during RFQ and NPI stages.
- Define and establish manufacturing processes, process flow, routing sequence, manufacturing strategy, and process requirements based on customer drawings and product specifications.
- Conduct DFM (Design for Manufacturability) review to identify technical risks, tolerance concerns, dimensional conflicts, process limitations, material concerns, and potential manufacturing gaps before production release. ...
Posted
17 days ago
CHINA COMMUNICATIONS CONSTRUCTION COMPANY (M) SDN. BHD.
MYR4,000 - MYR8,000 Per Month
Gerbang Nusajaya
- Assist in planning, coordination, and execution of construction works
- Review and interpret technical drawings, specifications, and documents
- Coordinate with site engineers, subcontractors, and project team to ensure smooth project progress ...
Posted
17 days ago
MYR4,000 - MYR6,000 Per Month
Gerbang Nusajaya
- Perform routine inspections, preventive maintenance, and corrective maintenance on critical mechanical equipment.
- Maintain HVAC systems, chillers, cooling towers, CRAC/CRAH units, pumps, piping systems, air handling units, and ventilation equipment.
- Respond promptly to mechanical failures, alarms, and emergency situations to minimize operational downtime. ...
Posted
17 days ago
MYR2,200 - MYR2,200 Per Month
Gerbang Nusajaya
- Monitors jobs to insure quality and compliance with job standards.
- Oversees inspection and maintenance of rides and equipment.
- Performs duties of specific trades when necessary. ...
Posted
8 days ago
MYR3,000 - MYR8,000 Per Month
Gerbang Nusajaya
- Assist in Mechanical & Electrical (M&E) installation and inspection works.
- Conduct routine maintenance and testing.
- Troubleshoot M&E issues on site. ...
Posted
17 days ago
Job searches related to “Engineering”
Browse Company:
More Companies
Browse "engineering" Job By:
Browse "engineering" Job By: