Engineering Jobs in Simpang Ampat - September 2026 - Urgent Hiring
Showing 28 jobs results for
"engineering"
in Simpang Ampat
Undisclosed
- To perform incoming, in-process, and final inspection based on requirements.2. To ensure inspection activities comply with specifications and drawings.3. To detect and properly segregate non-conforming parts.4. To maintain inspection records and reports accurately.5. To support internal calibration and verification activities.6. To monitor and maintain inspection tools and equipment condition.7. To communicate quality issues with production team for immediate action.8. To verify corrective actions on non-conforming issues.9. To perform basic data collection for quality analysis.10. To support QA Engineer in investigation and problem-solving activities.11. To assist in internal audits and documentation checks.12. To ensure compliance with ISO procedures and quality standards.13. To provide guidance to junior technicians during inspection.14. To support improvement initiatives on inspection efficiency.15. To prepare daily or weekly inspection reports when required.
Be an early applicant!
Posted
10 days ago
Undisclosed
- To monitor daily quality inspection on parts received, ensure specification & process requirements are met.
- Area of coverage may include vendor incoming raw material inspection, set-up buy-off, in-process inspection, out-going inspection.
- Monitor tools and equipment condition, QA room temperature and humidity tracking. ...
Be an early applicant!
Posted
4 days ago
Undisclosed
- Complete mechanical assembly/electrical assembly, installation and testing of equipment to time deadlines with minimal supervision.
- Assemble and integrate a variety of mechanical and electrical assemblies.
- Obtain and verify kitted (pre-picked) details parts and assemblies are issued correctly by comparing part numbers and quantities to drawing(s). ...
Be an early applicant!
Posted
4 days ago
MYR4,000 - MYR5,000 Per Month
- To support process improvement towards efficiency.
- To be responsible and ensure the program is created correctly within the time specified.
- To perform quality assurance tests to ensure products meet design specifications. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
- To perform in-process inspection independently to ensure compliance with specifications.2. To verify assembly work against drawings and work instructions.3. To record and report non-conformance (NCR).4. To support troubleshooting of quality issues with production team.5. To ensure inspection activities are completed within timeline.6. To maintain proper inspection records and reports.7. To support QA Engineer in quality data collection.8. To ensure compliance with ISO, SOP, and safety requirements.9. Other duties assigned by superior.
Be an early applicant!
Posted
4 days ago
MYR1,950 - MYR2,150 Per Month
Fresh Graduates
- Mengendalikan mesin dan peralatan pengeluaran
- Memantau proses pengeluaran
- Pemeriksaan kualiti produk ...
Be an early applicant!
Posted
10 days ago
Senior Production Planner
MYR6,000 - MYR8,000 Per Month
- To develop, maintain and execute the Master Production Schedule (MPS) to meet customer delivery requirements while optimizing production capacity and resource utilization.
- To perform production planning and scheduling for all manufacturing operations using the MES system.
- To review customer demand, sales forecasts and order priorities to establish an achievable production schedule. ...
Be an early applicant!
Posted
7 days ago
MYR1,750 - MYR2,000 Per Month
+Additional Compensation
Fresh Graduates
- Mengendalikan mesin dan peralatan pengeluaran semikonduktor mengikut Prosedur Operasi Standard (SOP).
- Memantau proses pengeluaran untuk memastikan operasi berjalan lancar dan mencapai sasaran pengeluaran.
- Menjalankan pemeriksaan kualiti asas bagi memastikan produk memenuhi spesifikasi yang ditetapkan ...
Posted
21 days ago
MYR1,950 - MYR2,150 Per Month
Fresh Graduates
- Mengendalikan mesin dan peralatan pengeluaran semikonduktor mengikut Prosedur Operasi Standard (SOP).
- Memantau proses pengeluaran untuk memastikan operasi berjalan lancar dan mencapai sasaran pengeluaran.
- Menjalankan pemeriksaan kualiti asas bagi memastikan produk memenuhi spesifikasi yang ditetapkan ...
Posted
15 days ago
Technician (Fresh) - Batu Kawan/Bayan Lepas
MYR1,900 - MYR2,000 Per Month
- Running machine
- Quality checking and inspection on measurements based on specifications from the customers (using Micrometers, Calipers etc).
- Lifting and packing of completed products (ribbon coils, nuggets etc). ...
Posted
4 days ago
Undisclosed
- Must understand the process flow for sheet metal fabrication / CNC machining processes.
- To review Drawing and BOM in ERP system.
- To release Work Order & schedule to production and monitor production activities to meet delivery timelines. ...
Be an early applicant!
Posted
4 days ago
Undisclosed
- Maintains and record inventory with identify, labelling, and placing materials/goods in stock.2. Locates materials/goods by pulling and verifying materials and supplies listed on production orders.3. Maintains in-process inventory at work centers/section by delivering and opening materials and supplies.4. Documents materials and supplies disposition by recording units delivered and location of units.5. Prepares finished goods for shipment by identifying, pulling, packing, crating, loading, and securing product.6. Maintains material-handling equipment.7. Keeps the inventory areas and workplace clean.8. Contributes to team effort by accomplishing related results as needed.9. Efficiently schedule and maintain handling of materials/goods10. Update daily shipment goods in computer files.11. Other duties and assignments as instructed by superiors from time to time.12. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
4 days ago
Undisclosed
- Report to QA Engineer/Senior QA Engineer.
- To lead the team consist of QA technicians and QA operators to carry out the daily inspection jobs.
- Daily quality inspection output efficiency monitoring and improvement. ...
Be an early applicant!
Posted
10 days ago
MYR2,800 - MYR3,500 Per Month
Fresh Graduates
- * Operate and Setup CNC Milling or Turning machine according to standard operating procedure.
- * Follow Setup Sheet instruction to setup machine.
- * Ensure goods produced meet to the quality requirement as stated in customer specifications. ...
Be an early applicant!
Posted
5 hours ago
MYR3,200 - MYR3,800 Per Month
- Arrange and follow up on daily production activities.
- Lead production operators to complete work according to the production schedule and SOPs.
- Manage manpower allocation, production output and product quality. ...
Posted
15 days ago
Manufacturing Specialist
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Assemble components of all product lines. Selects correct tools and fixtures based on SWI;
- Tests all assembled products. Troubleshoot and resolve problems associated with the assembly and testing of products.
- Ability in procedure reading, component identification, use of pertinent hand tools and rework techniques, equipment operation, dimensioning and setting tolerances of mechanical parts and assemblies. ...
Posted
4 days ago
MYR2,000 - MYR2,500 Per Month
- Inspect raw materials and finished products for defects and quality deviations.
- Perform visual and dimensional inspections using measuring tools such as calipers, micrometers, and gauges.
- Interpret technical drawings/blueprints, specifications, and inspection criteria. ...
Posted
2 months ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Assemble components of all product lines. Selects correct tools and fixtures based on SWI;
- Tests all assembled products. Troubleshoot and resolve problems associated with the assembly and testing of products.
- Ability in procedure reading, component identification, use of pertinent hand tools and rework techniques, equipment operation, dimensioning and setting tolerances of mechanical parts and assemblies. ...
Posted
a month ago
MYR1,900 - MYR2,000 Per Month
- Running machine
- Quality checking and inspection on measurements based on specifications from the customers (using Micrometers, Calipers etc).
- Lifting and packing of completed products (ribbon coils, nuggets etc). ...
Posted
a month ago
MYR1,750 - MYR2,000 Per Month
+Additional Compensation
Fresh Graduates
- Mengendalikan mesin dan peralatan pengeluaran semikonduktor mengikut Prosedur Operasi Standard (SOP).
- Memantau proses pengeluaran untuk memastikan operasi berjalan lancar dan mencapai sasaran pengeluaran.
- Menjalankan pemeriksaan kualiti asas bagi memastikan produk memenuhi spesifikasi yang ditetapkan ...
Posted
21 days ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Assemble components of all product lines. Selects correct tools and fixtures based on SWI;
- Tests all assembled products. Troubleshoot and resolve problems associated with the assembly and testing of products.
- Ability in procedure reading, component identification, use of pertinent hand tools and rework techniques, equipment operation, dimensioning and setting tolerances of mechanical parts and assemblies. ...
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Assemble components of all product lines. Selects correct tools and fixtures based on SWI;
- Tests all assembled products. Troubleshoot and resolve problems associated with the assembly and testing of products.
- Ability in procedure reading, component identification, use of pertinent hand tools and rework techniques, equipment operation, dimensioning and setting tolerances of mechanical parts and assemblies. ...
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Assemble components of all product lines. Selects correct tools and fixtures based on SWI;
- Tests all assembled products. Troubleshoot and resolve problems associated with the assembly and testing of products.
- Ability in procedure reading, component identification, use of pertinent hand tools and rework techniques, equipment operation, dimensioning and setting tolerances of mechanical parts and assemblies. ...
Posted
a month ago
MYR2,800 - MYR3,500 Per Month
Fresh Graduates
- * Operate and Setup CNC Milling or Turning machine according to standard operating procedure.
- * Follow Setup Sheet instruction to setup machine.
- * Ensure goods produced meet to the quality requirement as stated in customer specifications. ...
Be an early applicant!
Posted
5 hours ago
MYR1,700 - MYR2,000 Per Month
- Inspect product appearance, dimensions and quality.
- Perform inspections according to drawings, samples and inspection standards.
- Use vernier calipers, thickness gauges, hardness testers and other measuring equipment. ...
Be an early applicant!
Posted
a day ago
MYR1,700 - MYR2,000 Per Month
- Inspect product appearance, dimensions and quality.
- Perform inspections according to drawings, samples and inspection standards.
- Use vernier calipers, thickness gauges, hardness testers and other measuring equipment. ...
Be an early applicant!
Posted
a day ago
MYR2,800 - MYR3,500 Per Month
Fresh Graduates
- * Operate and Setup CNC Milling or Turning machine according to standard operating procedure.
- * Follow Setup Sheet instruction to setup machine.
- * Ensure goods produced meet to the quality requirement as stated in customer specifications. ...
Be an early applicant!
Posted
5 hours ago
MYR2,800 - MYR3,500 Per Month
Fresh Graduates
- * Operate and Setup CNC Milling or Turning machine according to standard operating procedure.
- * Follow Setup Sheet instruction to setup machine.
- * Ensure goods produced meet to the quality requirement as stated in customer specifications. ...
Be an early applicant!
Posted
5 hours ago
Job searches related to “Engineering”