It Engineer Jobs in Pulau Pinang - October 2026 - Urgent Hiring
Showing 156 jobs results for
"it engineer"
in Pulau Pinang
Undisclosed
Fresh Graduates
- Liaise with Mechanical Design and Software teams to understand project requirements and integrate electrical design specifications into the machine's development.
- Create and maintain detailed bills of materials (BOM), selecting and sourcing electrical components aligned with project needs, cost-effectiveness, and availability.
- Utilize AutoCAD/Eplan (or other electrical schematic tools) to design electrical schematic diagrams in accordance with customer specifications and project requirements. ...
Be an early applicant!
Posted
25 days ago
Undisclosed
- Optimization on metal work machine production flow and output.
- To review the new drawing metal work fabrication capabilities and provide the process flow, BOM, estimate production lead time for MES BOO & BOM.
- Establish WI for process plan, process WI and machine operation/set-up procedure for Metal Work processes. ...
Be an early applicant!
Posted
25 days ago
Undisclosed
- Developing the annual, monthly, weekly, and daily preventive maintenance schedule.
- Creating maintenance work instructions, checklists, SOPs, and troubleshooting guides.
- Identifying critical equipment and defining maintenance frequency. ...
Be an early applicant!
Posted
a month ago
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
- Ensure all incoming raw materials, including paper, film, inks, adhesives, and packaging materials, are inspected according to established specifications and quality standards.
- Review inspection results and communicate non-conformities to Purchasing and relevant stakeholders.
- Coordinate with Warehouse/Raw Material Store personnel to quarantine defective materials pending disposition. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- To implement Quality Management System & Document Control System.
- To monitor & improve document control(Engineering Change Notice, drawing/BOM approval & distribution, forms & format control).
- To plan, schedule & conduct internal audits. ...
Be an early applicant!
Posted
25 days ago
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
- Ensure all incoming raw materials, including paper, film, inks, adhesives, and packaging materials, are inspected according to established specifications and quality standards.
- Review inspection results and communicate non-conformities to Purchasing and relevant stakeholders.
- Coordinate with Warehouse/Raw Material Store personnel to quarantine defective materials pending disposition. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
25 days ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
25 days ago
Undisclosed
- Leads project of significant organizational profile not limit to own field of expertise.
- Completes engineering projects by organizing and controlling project elements.
- Monitoring and coordinating in between customer and interdepartmental for project execution. ...
Be an early applicant!
Posted
25 days ago
Undisclosed
- Responsible for developing software of automation machine.
- Develop detailed software design specification and documentation.
- Interacting with customers to provide technical support, troubleshooting and resolving customer issues. ...
Be an early applicant!
Posted
25 days ago
MYR900 - MYR1,000 Per Month
- Site Supervision: Oversee on-site visits and installations, collaborating closely with field teams to ensure adherence to safety protocols and quality standards.
- Project Management: Manage and coordinate the scheduling project sites and the warehouse, ensuring timely and efficient delivery. Oversee project logistics to ensure smooth execution.
- Troubleshooting: Assisting to support and make good of Solar Troubleshooting issues. ...
Be an early applicant!
Posted
25 days ago
MYR3,800 - MYR5,500 Per Month
Fresh Graduates
- Provide technical support to customers using SOLIDWORKS, addressing software issues and resolving technical queries.
- Collaborate with the sales team in pre-sales activities by delivering product demonstrations and technical presentations.
- Assist customers in post-sales activities by implementing and integrating SOLIDWORKS into their workflows. ...
Posted
8 days ago
MYR3,800 - MYR5,500 Per Month
Fresh Graduates
- Provide technical support to customers using SOLIDWORKS, addressing software issues and resolving technical queries.
- Collaborate with the sales team in pre-sales activities by delivering product demonstrations and technical presentations.
- Assist customers in post-sales activities by implementing and integrating SOLIDWORKS into their workflows. ...
Posted
8 days ago
MYR3,800 - MYR5,500 Per Month
Fresh Graduates
- Provide technical support to customers using SOLIDWORKS, addressing software issues and resolving technical queries.
- Collaborate with the sales team in pre-sales activities by delivering product demonstrations and technical presentations.
- Assist customers in post-sales activities by implementing and integrating SOLIDWORKS into their workflows. ...
Posted
8 days ago
Undisclosed
- Develop, formulate, evaluate and execute process development and process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation or experiments to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
a month ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
18 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
18 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
3 days ago
MYR2,500 - MYR3,500 Per Month
- Prepare and manage shipping-related documents for equipment, spare parts, and repair services.
- Coordinate domestic and international shipments with logistics providers and vendors.
- Maintain accurate records of shipping activities, customs documentation, and delivery status. ...
Posted
16 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
18 days ago
MYR3,800 - MYR5,500 Per Month
Fresh Graduates
- Provide technical support to customers using SOLIDWORKS, addressing software issues and resolving technical queries.
- Collaborate with the sales team in pre-sales activities by delivering product demonstrations and technical presentations.
- Assist customers in post-sales activities by implementing and integrating SOLIDWORKS into their workflows. ...
Posted
8 days ago
MYR5,000 - MYR7,000 Per Month
- Designs automated machine modules and mechanical parts according to customer requirements and relevant automation industry standards.
- Prepares detailed drawings and the Bill of Materials (BOM) for all mechanical fabrication parts and standard electro-pneumatic components.
- Prepares final production procedures, operation instructions, and process control instructions. ...
Posted
21 days ago
MYR5,000 - MYR7,000 Per Month
- Designs automated machine modules and mechanical parts according to customer requirements and relevant automation industry standards.
- Prepares detailed drawings and the Bill of Materials (BOM) for all mechanical fabrication parts and standard electro-pneumatic components.
- Prepares final production procedures, operation instructions, and process control instructions. ...
Posted
21 days ago
MYR5,000 - MYR7,000 Per Month
- Designs automated machine modules and mechanical parts according to customer requirements and relevant automation industry standards.
- Prepares detailed drawings and the Bill of Materials (BOM) for all mechanical fabrication parts and standard electro-pneumatic components.
- Prepares final production procedures, operation instructions, and process control instructions. ...
Posted
21 days ago
MYR5,000 - MYR7,000 Per Month
- Designs automated machine modules and mechanical parts according to customer requirements and relevant automation industry standards.
- Prepares detailed drawings and the Bill of Materials (BOM) for all mechanical fabrication parts and standard electro-pneumatic components.
- Prepares final production procedures, operation instructions, and process control instructions. ...
Posted
21 days ago
Undisclosed
- Design new package types and conduct feasibility study / Technical Gap Analysis.
- Generate drawing leadframe, copper clip, package outline and strip outline.
- Generate external bonding diagram. ...
Be an early applicant!
Posted
2 months ago
MYR4,000 - MYR5,500 Per Month
- Perform rack & stack installation of servers, switches, and storage equipment
- Install and manage fiber and copper cabling (RJ45, LC, SC connectors)
- Handle server landing (new deployment) and configuration support ...
Posted
a month ago
Undisclosed
- Perform process improvement plan and sustaining activity to ensure process yield improve.
- Machine maintenance and troubleshooting for any machine breakdown
- Involved in regular engineering NPI activities for product, process & equipment qualification ...
Be an early applicant!
Posted
2 months ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
2 months ago
MYR5,000 - MYR7,000 Per Month
- Designs automated machine modules and mechanical parts according to customer requirements and relevant automation industry standards.
- Prepares detailed drawings and the Bill of Materials (BOM) for all mechanical fabrication parts and standard electro-pneumatic components.
- Prepares final production procedures, operation instructions, and process control instructions. ...
Posted
21 days ago
Job searches related to “It Engineer”