For Employers - Post Jobs
Contact Us
Jobs
Companies
Forums
It Engineer Jobs in Pulau Pinang - September 2026 - Urgent Hiring
Showing 1,715 jobs results for
"it engineer"
in Pulau Pinang
Never miss any updates for It Engineer jobs in Pulau Pinang
Manage Alert
Undisclosed
Malaysia
- Provide onsite test engineering support at contract manufacturing sites in Bukit Minyak, Penang.
- Develop, update and maintain test procedures, initiate ECN (Engineering Change Notice) or deviations for design changes.
- Manage and troubleshoot test performance across Burn-In, Electromechanical, FCT, and computer configurations process-including firmware flashing, BIOS settings, driver installation, and operating system deployment for embedded systems and computing platforms. ...
Posted
a month ago
MST Facilities Sdn Bhd
Undisclosed
- Plan, coordinate and monitor HVAC and M&E projects across Penang and other assigned sites.
- Provide technical and operational support to site teams for HVAC, mechanical, electrical and utility systems.
- Coordinate equipment installation, testing, commissioning, system integration and project handover. ...
Posted
18 days ago
Undisclosed
- To define and develop a general-purpose measurement solution to meet customer and market demands.
- To define the system architecture and capture requirements for the new measurement solutions.
- To collaborate with different team to ensure the product meets system requirements. ...
Posted
22 days ago
Undisclosed
George Town
- 3–12 years of hands-on IC Custom Layout experience, with the ability to work independently or lead layout planning.
- Strong experience with TSMC process nodes, preferably advanced FinFET technologies (7nm, 5nm, or 3nm).
- Proven experience in custom Analog and High-Speed Mixed-Signal layout, including HSIO, SerDes (TX/RX), PLLs, VCOs, and Bandgap circuits. ...
Posted
a month ago
Undisclosed
George Town
- Boston Scientific is seeking an experienced R&D Engineer I to join the Galway Interventional Cardiology and Vascular Therapies (ICVT) Sustaining R&D team.
- The ICVT Sustaining R&D group provides design leadership and technical support for a broad portfolio of commercial coronary and vascular intervention products, ensuring safety, regulatory compliance, manufacturing continuity and continuous product improvement throughout the product lifecycle.
- The successful candidate will contribute to sustaining engineering projects while developing technical expertise through collaboration with experienced engineers and cross-functional teams to identify and implement design improvements while supporting both legacy and next-generation technologies. ...
Posted
a month ago
Undisclosed
Malaysia
- Support and maintain Backend Assemblymanufacturing equipment to achieve reliability, uptime, quality, and productivity targets.
- Perform equipment troubleshooting, root cause analysis, and implementation of corrective and preventive actions.
- Drive continuous improvement projects to improve equipment performance, reduce downtime, and increase operational efficiency. ...
Posted
12 days ago
Undisclosed
Malaysia
- Development of test programs for Automated Test Equipment (ATE )platforms for memory products.
- Maintenance of test programs for sustaining manufacturing activities.
- Development of test programs for new product development, product characterizations and new tester platform development. ...
Posted
a month ago
Undisclosed
- Operational Workflow: Analyzes and improves operational workflows with access to confidential productivity, cost, and manpower data.
- Team Leadership: Lead and manage a team of Industrial Technicians, providing guidance, training, and support to maximize performance and achieve organizational goals.
- Layout Optimization: Analyze and propose production layout strategies that optimize resource utilization, minimize waste, and ensure efficient workflow. ...
Posted
23 days ago
Undisclosed
George Town
- Lead facility layout and design projects with the Process Development Engineering, Production, Materials, Facilities and Manufacturing Engineering teams (as directed by site).
- Initiate, lead and champion lean projects (i.e. Lean Production, Lean Support and Born Lean) with the Production, Process Development, Manufacturing Engineering and support functions, while promoting Lean Essentials.
- Drive the ongoing introduction and advancement of lean manufacturing culture, principles and practices across the plant and work with local management to create the Lean vision for the plant. ...
Posted
a month ago
Undisclosed
George Town
- Designs and develops software programs for all new equipment and update software for existing equipment where necessary.
- Proven track record in the operation of all electronic controlled manufacturing equipment. Be familiar with all software programs running the above systems.
- Become an expert in each of these systems and ensure all necessary hardware and software is on site to support same. Ensure that these systems are maintained and validated as per BSIL procedures for hardware and software validation. ...
Posted
a month ago
Undisclosed
George Town
- Serve as the Package Level Reliability (PLR) and Silicon Photonic (SiPh) product application engineer by offering technical expertise and problem-solving solutions.
- Assist the benchmark project and ensure the smooth execution of project until final delivery of demo system and final acceptance.
- Deliver products, services, and consultative support to both prospective and existing customers. ...
Posted
a month ago
Undisclosed
Malaysia
- Participate in all phases of product development: requirements definition, design, implementation, and testing.
- Analyze software requirements to ensure feasibility within quality, time, and cost constraints.
- Coordinate and contribute to software design and code reviews. ...
Posted
a month ago
OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang
Undisclosed
- Define, deploy, and continuously improve the Lean Governance framework and roadmap.
- Lead production system assessments and identify opportunities to improve productivity, quality, cycle time, utilization, and cost.
- Drive implementation of Lean principles, flow optimization, bottleneck balancing, product-tool matching, and workforce productivity improvements. ...
Posted
22 days ago
Undisclosed
Malaysia
- Define manufacturing strategies and process roadmaps for key production technologies.
- Define manufacturing readiness metrics and production ramp strategies.
- Mentor and develop Senior Process Engineers. ...
Posted
18 days ago
Undisclosed
- Review product and process indicator to ensure product conform to quality requirement
- Trigger product containment when there is non conformity
- Coordinate MRB for disposition of non conformance parts ...
Posted
a month ago
Undisclosed
- Lead strategic equipment engineering initiatives to improve equipment reliability, manufacturing efficiency, OEE performance, and long-term operational sustainability.
- Lead complex equipment troubleshooting and advanced root cause analysis for critical manufacturing issues, implementing robust corrective and preventive actions.
- Develop and standardize best-in-class engineering practices, maintenance strategies, and equipment performance optimization methodologies across manufacturing operations. ...
Posted
a month ago
Undisclosed
Prai
- L ead and facilitate cross-functional teams in new product development, product modifications, and selected capacity expansion projects.
- Monitor overall project schedules, define critical paths, and ensure team members meet agreed timelines and deliverables.
- Manage project scope, schedule, and cost changes while conducting risk assessments and implementing mitigation plans. ...
Posted
a month ago
Undisclosed
George Town
- Create, analyze and review technical charts
- Develop and modify process formulations, methods and controls to meet quality standards
- Establish SOP (Standard operating process) and FMEA (Failure mode and effects analysis) for related process ...
Posted
23 days ago
Undisclosed
Prai
- Leads small and medium sized projects and manages the technical elements.
- Job Responsibilities
- Lead Lean Six Sigma and 5S initiatives across the production floor . ...
Posted
a month ago
Undisclosed
Prai
- Collaborate with Product and Mold Designers and the Development team to enhance tooling based on mold design concepts and product features.
- Develop and execute comprehensive tooling qualification plans, covering external and internal debugging through to mold release for production.
- Create process optimization worksheets, including IE rate sheets and holding pressure optimization workflows. ...
Posted
a month ago
Undisclosed
George Town
- Independently executes plans to support supply chain objectives; supplier performance, supplied material risk mitigation and execution of materials VIP. Can communicate plans at a high level within the organization and organize projects by requesting support at plant management level. Proficient in the use of all business tools.
- Leads project teams coordinating the efforts of engineers and cross functional team members to qualify and improve supplier processes. Plans, schedules, conducts or coordinates all phases of the engineering work for of a major project.
- Performs work that involves conventional engineering practice but may include a variety of complex features such a conflicting design requirements, unsuitability of standard materials, and difficult coordination requirement. ...
Posted
a month ago
Undisclosed
George Town
- Creates and reviews mechanical designs and detail drawings utilizing parametric modelling and FEA software.
- Coordinates, monitors and documents project designs, estimates, and costs. Complete project deliverables and monitor project schedule and scope changes to assure the team can meet delivery requirements.
- Prepares standard reports/documentation to communicate status and results. ...
Posted
a month ago
Undisclosed
George Town
- Demonstrates basic technical expertise on process/product technologies to support design, optimization, validation and troubleshooting of those technologies.
- Under supervisory direction, provides input to Equipment engineering or external equipment/tooling or material vendors in the selection, design & development of new (or upgrades to existing) equipment, tooling and materials.
- Demonstrates good working knowledge of DFSS/DMAIC tools and, with mentor assistance, applies these tools in the characterization, optimization and troubleshooting of process equipment and technology performance. ...
Posted
a month ago
Undisclosed
George Town
- Participates on project teams to develop clear specifications, evaluates the feasibility of concepts, and provides formal estimates for system designs. Leads and liaises with external design companies to provide engineering solutions for BSC.
- Creates and reviews mechanical designs and detail drawings utilizing parametric modelling and FEA software.
- Coordinates, monitors and documents project designs, estimates, and costs. Complete project deliverables and monitor project schedule and scope changes to assure the team can meet delivery requirements. ...
Posted
a month ago
Undisclosed
George Town
- To identify, order and commission the key process equipment to CGMP in the Operations Engineering Cycle to meet key business objectives
- Engineering process owner for the area.
- Develop and modify manufacturing documentation and procedures to support commercial products as well as the introduction of new products to the production floor (assembly procedures, BOMs, etc.) ...
Posted
a month ago
Undisclosed
Prai
- Lead and facilitate cross-functional teams in new product development, product modifications, and selected capacity expansion projects.
- Monitor overall project schedules, define critical paths, and ensure team members meet agreed timelines and deliverables.
- Manage project scope, schedule, and cost changes while conducting risk assessments and implementing mitigation plans. ...
Posted
a month ago
Undisclosed
Malaysia
- This role focuses on designing engineering solutions for manufacturing processes, adhering to established principles and specifications. It involves implementing production standards, tooling requirements, and capacity models for new product components.
- The position includes collaborating with stakeholders to evaluate factory performance, communicating with internal and external partners on compliance and issues, and contributing to project teams for cost-effective manufacturing solutions. The role also ensures regulatory compliance and contributes to current-state analysis and recommendations while following company policies.
- Designs portions of engineering solutions, including methods, operation sequences, and processes for the manufacturing of parts, component sub- assemblies, and final assemblies, based on established engineering principles and provided specifications. ...
Posted
a month ago
Undisclosed
- Technical / Applications: Product knowledge, solution configuration, and technical support
- Sales / Commercial: Customer engagement, pipeline support, and opportunity qualification
- Marketing / Demand Generation: Campaigns, events, and customer outreach ...
Posted
a month ago
Undisclosed
Malaysia
- Manage programs (multiple projects per program) of medium complexity (technology, organizationally). Lead cross-functional, global core team(s), kick off programs, establish schedules and drive meetings.
- Present and communicate status to the business leaders and customers. Review and interpret customer specifications and provide customer feedback
- Coordinate site-wide deployment efforts. ...
Posted
a month ago
Job searches related to “It Engineer”
Browse Location:
More Location
Browse Company:
More Companies
Browse "it engineer" Job By:
Browse "it engineer" Job By:
More Industries