It Technician Jobs in Bayan Lepas - September 2026 - Urgent Hiring

Showing 379 jobs results for "it technician" in Bayan Lepas
Never miss any updates for It Technician jobs in Bayan Lepas
  • Monitor and maintain process control parameters (flow rate, temperature, chemical concentration, mega-sonic power)
  • Review and respond to SPC charts and process alarms
  • Assist in root cause analysis of yield excursions and defect increases ...
Posted
a day ago
  • Monitor and maintain process control parameters (flow rate, temperature, chemical concentration, mega-sonic power)
  • Review and respond to SPC charts and process alarms
  • Assist in root cause analysis of yield excursions and defect increases ...
Posted
20 hours ago
  • Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
  • Carry out trouble shooting on metrology tools.
  • Data compilation using Excel or Power point for measurement samples. ...
Posted
3 days ago
  • Support daily PN Test operations to meet production, quality, and delivery requirements.
  • Perform test head setup, handling, inspection, and basic troubleshooting according to established procedures.
  • Support test head inventory control, tracking, deployment, and movement to ensure availability for production and engineering activities. ...
Posted
3 days ago
  • Perform shifty buyoff on the critical process machine parameter buyoff within process control
  • Perform shifty buyoff on the process make sure meeting process criteria and requirement
  • Perform equipment conversion and setup and buyoff machine within process control before release to production mode ...
Posted
17 days ago
  • Perform cleanroom environmental surveys and area buy-offs, including Filter Fan Unit surface velocity and leak scan, airborne particle counts and surface contamination sampling.
  • Conduct routine and event-driven sampling of equipment, process tools, and materials to verify cleanliness and ensure compliance with contamination control standards.
  • Measure and analyze process samples to monitor for potential particulate or molecular contamination. ...
Posted
4 days ago
  • Diploma in engineering, mechatronics, mechanical, electrical, or a related field.
  • Good communication and interpersonal skills.
  • Willing to work shifts / odd hours. ...
Posted
7 days ago
  • Overview
  • Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Bruker offers differentiated, high-value life science and diagnostics systems and solutions in preclinical imaging, clinical phenomics research, proteomics and multiomics, spatial and single-cell biology, functional structural and condensate biology, as well as in clinical microbiology and molecular diagnostics. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.
  • Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions. ...
Posted
7 days ago
  • Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
  • Carry out trouble shooting on metrology tools.
  • Data compilation using Excel or Power point for measurement samples. ...
Posted
7 days ago
  • Operate various analytical equipment according to established protocols and procedures.
  • Perform comprehensive analysis of samples
  • Report out analytical results and findings ...
Posted
8 days ago
  • Install and assemble complete POS terminals, monitors, mounting hardware, and cabling at client/store locations.
  • Configure and integrate POS peripherals including barcode scanners, receipt/label printers, customer displays, cash drawers, payment terminals, and weighing scales.
  • Install and configure POS applications, drivers, runtimes, licenses, updates, and patches. ...
Posted
8 days ago
  • Support engineers and technicians in daily operation and maintenance activities for mechanical systems.
  • Assist in monitoring facility systems including:
  • HVAC systems ...
Posted
8 days ago
  • Perform process characterization for sputter equipment and materials.
  • Conduct buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
  • Perform measurements and data collection for characterization samples. ...
Posted
8 days ago
  • Menjalankan kerja pemasangan komponen mekanikal, bahagian mesin, sub-assembly dan mesin lengkap berdasarkan lukisan kejuruteraan, arahan pemasangan dan spesifikasi.
  • Melaksanakan kerja mechanical fitting, pemasangan mesin, penjajaran (alignment), pelarasan dan pemasangan komponen mekanikal.
  • Menggunakan hand tools, power tools, alat pengukuran dan peralatan bengkel dengan selamat dan betul. ...
Posted
8 days ago

ASE Electronics (M) Sdn Bhd.

  • Diploma in Electrical/Electronics/Mechanical Engineering.
  • Basic knowledge in Molding process (Hydraulic and servo system,)
  • Able to read schematic diagram. ...
Posted
8 days ago
  • Support the Facilities Engineering team in daily operation and maintenance activities for building electrical systems.
  • Assist in monitoring Low Voltage (LV) electrical systems and building power distribution equipment.
  • Participate in preventive maintenance (PM) and corrective maintenance (CM) activities for electrical equipment and facilities systems. ...
Posted
8 days ago
  • Perform all types of DET Guzik & QMT test
  • Ensure no delay in DET testing and that the test results are available on time
  • Buyoff measurement result is shown consistent and stable to meet Test Criteria ...
Posted
14 days ago
  • Perform all types of DET Guzik & QMT test
  • Ensure no delay in DET testing and that the test results are available on time
  • Buyoff measurement result is shown consistent and stable to meet Test Criteria ...
Posted
14 days ago
  • Perform process characterization for sputter equipment and materials.
  • Conduct buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
  • Perform measurements and data collection for characterization samples. ...
Posted
14 days ago
  • Assist Process Engineer with any Engineering / Manufacturing related function.
  • Supports production in the resolution of process issues.
  • Supports Process Engineering with process and equipment qualifications, process evaluation, and process improvements. ...
Posted
21 days ago

IN-TECH ELECTRONICS

  • Responsible for the tester maintaining, repairing, and spare parts management.
  • Prepare master maintenance, calibration schedule, perform predictive and preventive maintenance
  • To handle spare parts management or tester repair and services. ...
Posted
21 days ago

In-Tech Electronics

  • Responsible for the tester maintaining, repairing, and spare parts management.
  • Prepare master maintenance, calibration schedule, perform predictive and preventive maintenance
  • To handle spare parts management or tester repair and services. ...
Posted
21 days ago
  • Operate and continuously monitor facility systems, including heating, ventilation, air conditioning, plumbing, electrical, and fire/life safety systems during assigned shifts.
  • Provide day-to-day operational support in response to service requests from facility users.
  • Ensure all systems operate safely, efficiently, and within defined operating limits. ...
Posted
22 days ago
  • Support departmental objectives and daily test operations
  • Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
  • Support continuous cost improvement initiatives related to test heads ...
Posted
16 days ago
  • Conduct inspection on returned FG (Media, Bag, Carton, or Pallet) and ad-hoc impacted FG, with accurate disposition and documentation per quality standards.
  • Perform Out-of-Box (OBA) Audits on FG to verify packaging integrity, labeling, and product conformance prior to shipment.
  • Execute FG Archive activities per established retention and traceability procedures. ...
Posted
2 days ago
  • Develops / executes Manufacturing solutions / Provide services that are high-quality, cost-appropriate, and satisfy the customer's requirements while establishing an area of technical specialty (in-discipline) and applies process improvement or troubleshooting as it applies to their role.
  • Utilizes appropriate tools to perform necessary work including creation, analysis, and verification of documentation, programs, models, processes or production as it applies to their role.
  • Demonstrates an intermediate, discipline-specific understanding of how they support the full Plexus Manufacturing processes / Product Requirements & Specifications / cross discipline OR supplier coordination, as it applies to their role. ...
Posted
16 days ago
  • Executes Manufacturing solutions/ Provide services that are high-quality, cost-appropriate, and satisfy the customer's requirements and applies process improvement or troubleshooting as it applies to their role.
  • Utilizes appropriate tools to perform necessary work including creation, analysis, and verification of documentation, programs, models, processes or production as it applies to their role.
  • Demonstrates a basic, discipline-specific understanding of how they support the full Plexus Manufacturing processes / Product Requirements & Specifications as it applies to their role. ...
Posted
16 days ago
  • Operate various analytical equipment according to established protocols and procedures.
  • Perform comprehensive analysis of samples
  • Report out analytical results and findings ...
Posted
17 days ago
Posted
17 days ago
Posted
17 days ago