Jobs
Companies
Forums
Jururtera Jobs in Bayan Lepas - October 2026 - Urgent Hiring - Page 15
Showing 1,076 jobs results for
"jururtera"
in Bayan Lepas
Never miss any updates for Jururtera jobs in Bayan Lepas
Manage Alert
Undisclosed
- Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
- Carry out trouble shooting on metrology tools.
- Data compilation using Excel or Power point for measurement samples. ...
Posted
12 days ago
Undisclosed
- Perform cleanroom environmental surveys and area buy-offs, including Filter Fan Unit surface velocity and leak scan, airborne particle counts and surface contamination sampling.
- Conduct routine and event-driven sampling of equipment, process tools, and materials to verify cleanliness and ensure compliance with contamination control standards.
- Measure and analyze process samples to monitor for potential particulate or molecular contamination. ...
Posted
12 days ago
Undisclosed
- Executes Manufacturing solutions/ Provide services that are high-quality, cost-appropriate, and satisfy the customer's requirements and applies process improvement or troubleshooting as it applies to their role.
- Utilizes appropriate tools to perform necessary work including creation, analysis, and verification of documentation, programs, models, processes or production as it applies to their role.
- Demonstrates a basic, discipline-specific understanding of how they support the full Plexus Manufacturing processes / Product Requirements & Specifications as it applies to their role. ...
Posted
20 days ago
Undisclosed
- Lead day-to-day equipment sustaining activities, including troubleshooting, failure analysis, and resolution of equipment-related production issues.
- Drive equipment reliability improvement initiatives to enhance equipment uptime, reduce chronic failures, and improve overall operational stability.
- Develop, implement, and optimize preventive and predictive maintenance strategies to improve long-term equipment performance. ...
Posted
24 days ago
Undisclosed
- Lead time and motion studies, establish standard times, and drive cycle time reduction initiatives across production lines.
- Perform advanced line balancing, manpower optimization, and resource planning to maximize throughput and minimize waste.
- Develop, maintain, and enhance capacity models to support strategic production planning, capital expenditure justification, and long-term site roadmaps. ...
Posted
9 days ago
Undisclosed
- Operate and monitor process equipment, ensuring consistent performance and adherence to established control limits and specifications
- Collect, record, and analyze process data with precision, identifying trends and anomalies that may indicate process changes or equipment issues
- Perform troubleshooting activities to isolate and resolve equipment malfunctions, working collaboratively with engineering teams to implement corrective actions ...
Posted
13 days ago
Undisclosed
- Perform process characterization for sputter equipment and materials.
- Conduct buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
- Perform measurements and data collection for characterization samples. ...
Posted
13 days ago
Undisclosed
- Run characterization / evaluations samples on Sputter machine following the experiment plan prepared by Engineer
- Line setup, KPIV buyoff & validation following machine start-up procedures, feedback any abnormality found to the Engineer and take appropriate corrective action.
- Basic proficiency in interpreting and analyzing control charts and process trends. ...
Posted
13 days ago
Undisclosed
- Preferred Background
- •Technical School / Vocational School Certificate
- •Diploma in Computer Science / Information Technology / Computer Engineering ...
Posted
13 days ago
Undisclosed
- Design and develop end-to-end data pipelines using Azure Data Factory (ADF).
- Ingest data from REST APIs, SharePoint, Excel, and ADLS Gen2.
- Build scalable ETL/ELT solutions using ADF Mapping Data Flows and metadata-driven frameworks. ...
Posted
18 days ago
Undisclosed
- Key Responsibilities
- • Define and execute AMS/System Verification strategies and verification plans for complex mixed-signal ICs.
- • Analyze product specifications, system requirements, design specifications, and application requirements ...
Posted
10 days ago
Undisclosed
- Perform cleanroom environmental surveys and area buy-offs, including Filter Fan Unit surface velocity and leak scan, airborne particle counts and surface contamination sampling.
- Conduct routine and event-driven sampling of equipment, process tools, and materials to verify cleanliness and ensure compliance with contamination control standards.
- Measure and analyze process samples to monitor for potential particulate or molecular contamination. ...
Posted
13 days ago
Undisclosed
- Perform process characterization for sputter equipment and materials.
- Conduct buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
- Perform measurements and data collection for characterization samples. ...
Posted
13 days ago
Undisclosed
- Unleash the value of systems & hardware through development of drivers, software, or firmware.
- Specify, design, implement, and test software features for new and existing products.
- Drive software development excellence, continuous improvement and bring innovation into software and hardware products. ...
Posted
18 days ago
Undisclosed
- Run characterization / evaluations samples on Sputter machine following the experiment plan prepared by Engineer
- Line setup, KPIV buyoff & validation following machine start-up procedures, feedback any abnormality found to the Engineer and take appropriate corrective action.
- Basic proficiency in interpreting and analyzing control charts and process trends. ...
Posted
13 days ago
MYR2,000 - MYR3,000 Per Month
- Applicants must be willing to adopt attitude of flexibility in working environment and hours.
- Good leadership, interaction and communication skills is an advantage.
- Training will be provided. ...
Posted
13 days ago
MYR2,100 - MYR3,500 Per Month
- Diploma in Electrical/Electronics/Mechanical Engineering.
- Basic knowledge in Molding process (Hydraulic and servo system,)
- Able to read schematic diagram. ...
Posted
13 days ago
MYR1,890 - MYR3,500 Per Month
- Meal allowance
- Professional development
- Job Overview: ...
Posted
13 days ago
Undisclosed
- Perform lot disposition using structured approaches.
- Perform deep‑dive data analysis for root‑cause investigations for Final Test excursions and drive corrective actions.
- Review SYL or SBL triggers and optimize limits to reduce false alarms and unnecessary retests. ...
Posted
18 days ago
Undisclosed
- Operate and monitor process equipment, ensuring consistent performance and adherence to established control limits and specifications
- Collect, record, and analyze process data with precision, identifying trends and anomalies that may indicate process changes or equipment issues
- Perform troubleshooting activities to isolate and resolve equipment malfunctions, working collaboratively with engineering teams to implement corrective actions ...
Posted
13 days ago
MYR2,200 - MYR2,800 Per Month
- Support network infrastructure deployment and tool installation activities.
- Support switched network environments and basic Cisco device troubleshooting.
- Conduct basic to intermediate network troubleshooting. ...
Posted
21 days ago
Undisclosed
- Perform test head setup, deployment, handling, inspection, and qualification activities in accordance with engineering requirements and procedures.
- Conduct test head condition assessments and assist in failure analysis and defect investigations.
- Maintain test head inventory records, tracking, and movement coordination to support production and engineering requirements. ...
Posted
14 days ago
Undisclosed
- Lead day-to-day equipment sustaining activities, including troubleshooting, failure analysis, and resolution of equipment-related production issues.
- Drive equipment reliability improvement initiatives to enhance equipment uptime, reduce chronic failures, and improve overall operational stability.
- Develop, implement, and optimize preventive and predictive maintenance strategies to improve long-term equipment performance. ...
Posted
24 days ago
Undisclosed
- To lead, supervise and coach/train technicians
- Coordinate and follow-up sputter systems activities from front end until back end and process documentation.
- To audit sputter parameters and practice periodically, include online SPC and procedure conformance. ...
Posted
14 days ago
MYR6,000 - MYR7,000 Per Month
- To maintain company AMHS equipment as a member of the sustaining support team at the customer's facility.
- Must proactively look for, identify, and resolve daily issues and prevent downtime.
- Responsible for error recovery, equipment repairs and installations of any assigned Continuing Improvement Program (CIP) modifications and upgrades. ...
Posted
11 days ago
MYR6,000 - MYR7,000 Per Month
- To maintain company AMHS equipment as a member of the sustaining support team at the customer's facility.
- Must proactively look for, identify, and resolve daily issues and prevent downtime.
- Responsible for error recovery, equipment repairs and installations of any assigned Continuing Improvement Program (CIP) modifications and upgrades. ...
Posted
11 days ago
Job searches related to “Jururtera”
Browse Company:
More Companies
Browse "jururtera" Job By:
Browse "jururtera" Job By:
More Industries