Manufacturing Technician Jobs in Kuala Lumpur - August 2026 - Urgent Hiring

Showing 80 jobs results for "manufacturing technician" in Kuala Lumpur
Never miss any updates for Manufacturing Technician jobs in Kuala Lumpur
premium banner
Chat Available
MYR1,800 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
Near Train Station
  • To set up and operate plastic injection moulding/ plastic extrusion machine operation and troubleshooting
  • To operate blow moulding as per expectation
  • To set up tooling and machine upkeeping and maintenance ...
Posted
3 days ago
Chat Available
Up to MYR2,300 Per Month

KL City, WP Kuala Lumpur

Near Train Station
  • Mix raw materials according to chemical formulations.
  • Operate and monitor production machinery.
  • Ensure products meet quality standards. ...

Be an early applicant!

Posted
18 hours ago
High Opportunity
Undisclosed

Petaling, WP Kuala Lumpur

Near Train Station
  • To check on Work Order/Certificate of Completion/Requisition of Payment;
  • To co-ordination with sub-contractors; • To co-ordinate monthly Maintenance Reports to MHA
  • For submission of insurance claims to the Administration Department on the damaged property due to the accident happened on Highway ...

Be an early applicant!

Posted
10 days ago
Undisclosed

Bandar Kuala Lumpur, WP Kuala Lumpur

Near Train Station
  • Support the Operations Manager in managing overall maintenance and integrity activities for upstream production facilities.
  • Develop and implement preventive maintenance (PM), predictive maintenance (PdM), and corrective maintenance strategies.
  • Ensure compliance with asset integrity management systems, HSE standards, and regulatory requirements. ...
Strong knowledge of Asset Integrity Management Systems (AIMS) preventive and predictive maintenance
+2

Be an early applicant!

Posted
a month ago
Chat Available
Up to MYR3,000 Per Month

Bandar Kuala Lumpur, WP Kuala Lumpur

Near Train Station
  • Carry out routine maintenance and troubleshooting of electrical wiring systems and related equipment.
  • Ensure all M&E systems are functioning properly, including:
  • Air conditioning (22–24°C) ...
M&E Systems Knowledge Safety Awareness
+3
Posted
6 days ago
Chat Available
MYR1,800 - MYR2,500 Per Month
Fresh Graduates
Near Train Station
  • To set up and operate plastic injection moulding/ plastic extrusion machine operation and troubleshooting
  • To operate blow moulding as per expectation
  • To set up tooling and machine upkeeping and maintenance ...
Posted
22 days ago
Chat Available
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
Near Train Station
  • Perform wiring, installation and maintenance of security systems including CCTV, alarm systems, door access systems and ELV systems.
  • Ensure all installation works comply with company standards, procedures and safety requirements.
  • Inspect and test completed installations to ensure proper functionality and quality standards. ...
Troubleshooting & maintenance Installation & repair works
+2
Posted
a month ago
Undisclosed

KL City

  • Act as the primary talent partner on the ground at the client site
  • Drive full-cycle recruitment for technical, engineering, manufacturing, and corporate functions
  • Collaborate closely with line managers, HR, and APAC teams to shape hiring strategies ...
Posted
10 days ago
Undisclosed

KL City

  • Business Planning: Establish delivery solutions and systems based on product manufacturing engineering to support the entire supply chain, including manufacturing, warehousing, delivery, reconfiguration, maintenance, and quality assurance.
  • Manufacturing Technology & Management:
  • Strengthen investment in manufacturing technologies for platform-based and AI products. ...
Posted
5 days ago
Undisclosed

KL City

  • Bachelor's Degree in Engineering (Manufacturing Engineering, Electrical Engineering, Industrial Engineering, IT/computer science).
  • Good command of writing and spoken in English and Bahasa Malaysia.
  • Able to work as an individual as well as a good team player. ...
Posted
15 days ago
Undisclosed

KL City

  • Business Planning: Establish delivery solutions and systems based on product manufacturing engineering to support the entire supply chain, including manufacturing, warehousing, delivery, reconfiguration, maintenance, and quality assurance.
  • Manufacturing Technology & Management:
  • Strengthen investment in manufacturing technologies for platform-based and AI products. ...
Posted
a month ago
Undisclosed
  • Shift support for continuous production line and ensure equipment in good performance to meet the goals on Equipment uptime, yield, and cost, utilization and cycle time.
  • Support the production Report the online machine status and issue to EE Leader and Engineer.
  • Perform line conversion and complete FAI ...
Posted
20 hours ago
Undisclosed
  • Shift support for continuous production line and ensure equipment in good performance to meet the goals on Equipment uptime, yield, and cost, utilization and cycle time.
  • Support the production Report the online machine status and issue to EE Leader and Engineer.
  • Perform line conversion and complete FAI ...
Posted
17 days ago
Undisclosed
  • Responsible for sustaining, preventive maintenance (PM), setup, qualification, and conversion activities for Die Prep equipment to ensure optimum machine performance and production efficiency.
  • Perform hands-on troubleshooting and provide systematic root cause analysis for equipment-related issues using structured problem-solving methodologies.
  • Lead complex equipment troubleshooting activities and drive corrective and preventive actions through tools such as 5 Why Analysis, Fishbone Diagram, and Failure Analysis techniques. ...
Posted
14 days ago
Undisclosed
  • Ensure production machine performance is well maintain.
  • Assist process/equipment engineers to carry out or setup new device evaluation / engineering run when needed.
  • Practice 6’s every time after maintenance/repairing /conversion ...
Posted
7 days ago
Undisclosed
  • Ensure production machine performance is well maintain.
  • Assist process/equipment engineers to carry out or setup new device evaluation / engineering run when needed.
  • Practice 6’s every time after maintenance/repairing /conversion ...
Posted
10 days ago
Undisclosed
  • Shift support for continuous production line and ensure equipment in good performance to meet the goals on Equipment uptime, yield, and cost, utilization and cycle time.
  • Support the production Report the online machine status and issue to EE Leader and Engineer.
  • Perform line conversion and complete FAI ...
Posted
17 days ago
Undisclosed
  • Good discipline and behavior, willing to learn and grow.
  • Shift technician support production to achieve KPI goals on Molding machine down time; utilization & to improve machine MTBA & OEE.
  • Ability to perform machine preventive maintenance job and to improve equipment capability thru continuous improvement activities. ...
Posted
15 days ago
Undisclosed
  • Shift support for continuous production line and ensure equipment in good performance to meet the goals on Equipment uptime, yield, and cost, utilization and cycle time.
  • Support the production Report the online machine status and issue to EE Leader and Engineer.
  • Perform line conversion and complete FAI ...
Posted
15 days ago
Undisclosed
  • Support the Repair Center’s daily activities and ensure smooth execution of repair tasks.
  • Liaise with engineers on spare-part sourcing and repair planning.
  • Assist Repair Center technicians in troubleshooting and repairing until final buy-off by stakeholders. ...
Posted
20 days ago
Undisclosed

KL City

  • Develop production schedules.
  • Monitor manufacturing capacity.
  • Analyze demand and supply. ...
Posted
25 days ago
Undisclosed

KL City

  • We are seeking an experienced engineer to provide global support for our Petrochemical businesses, with a focus on production planning optimization. The ideal candidate would have process knowledge / background in Olefins or Aromatics, enabling them to develop, sustain, and deploy work practices and technologies that ensure optimal model health for accurate crude and feedstock purchasing and run plan signals.
  • Key responsibilities include leveraging data analytics and visualization to drive informed business decisions and offering actionable recommendations to our manufacturing sites. This role is crucial in enhancing operational efficiency and supporting strategic objectives within the organization.
  • If you are passionate about data-driven decision-making and possess strong analytical skills, we invite you to apply. ...
Posted
4 days ago
Undisclosed

KL City

  • Develop and maintain simplified production planning models derived from detailed process simulations, ensuring accuracy and reliability for operational planning
  • Apply statistical and data-driven techniques (e.g. Design of Experiments, regression modelling) to generate robust and representative models
  • Use data analysis tools to evaluate input relationships, validate outputs, and ensure model quality (e.g. correlation analysis, validation plots) ...
Posted
4 days ago
Undisclosed

KL City

  • JOB SUMMARY
  • Assists department head in managing budget, capital expenditures, preventative maintenance and energy conservation. Accountable for maintaining the building and grounds with particular attention towards safety, security and asset protection. Assigns, tracks and follows up on status of work assigned to staff and contractors. Helps to increase guest and employee satisfaction through effective communications and training.
  • CANDIDATE PROFILE ...
Posted
9 days ago
Undisclosed

KL City

  • High school diploma or GED; 4 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.
  • 2-year degree from an accredited university in Building and Construction, Engineering, Mechanics, or related major; 2 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/electrical/plumbing.
  • Supervises distribution of repair work orders. ...
Posted
10 days ago
Undisclosed

KL City

Posted
13 days ago
Undisclosed

KL City

  • Quality Continuous Improvement – proactively identify, lead and execute quality improvement projects to systemically improve baseline area quality performance in achieving Zero-Defect target by structurally performing risk assessment, eliminating systemic quality risks and implementing firewall and system control.
  • Automotive Quality – act as primary custodian of IATF 16949 Standards and VDA 6.3 Process Audits Requirement, ensuring all manufacturing controls are fully compliant.
  • Problem Solving – leading area Quality Improvement Team (QIT) in resolving customer returns or internal quality events through comprehensive 8D methodology and data-driven root cause analysis tools (eg. 3x5 Whys, Fault Tree Analysis, Is/ Is-Not…) ...
Posted
13 days ago
Undisclosed

KL City

  • Perform facilities and platform integrity assessments to confirm suitability of existing offshore installations for workover activities.
  • Review and interpret historical design documentation, modification records, inspection findings, corrosion monitoring data, and Integrity Management System outputs.
  • Assess structural and facilities limitations related to: ...
Posted
14 days ago
Undisclosed

KL City

  • Support process control systems infrastructure (software/hardware) and advanced control applications for refineries and chemical plants.
  • Design and engineer computing infrastructure such as servers, operating systems and networks.
  • Integrate and deploy advanced control applications into the industrial control systems (ICS) environment. ...
Posted
14 days ago
Undisclosed

KL City

  • Develop and maintain simplified production planning models derived from detailed process simulations, ensuring accuracy and reliability for operational planning
  • Apply statistical and data-driven techniques (e.g. Design of Experiments, regression modelling) to generate robust and representative models
  • Use data analysis tools to evaluate input relationships, validate outputs, and ensure model quality (e.g. correlation analysis, validation plots) ...
Posted
14 days ago