Manufacturing Technician Jobs in Melaka - June 2026 - Urgent Hiring
Paparan 31 hasil carian kerja kosong untuk
"manufacturing technician"
di Melaka
Jangan lepaskan peluang untuk kerja Manufacturing Technician terkini!
Aktifkan Makluman Pekerjaan
Pekerjaan "manufacturing technician"
di "Melaka"
Urus Pemberitahuan
Undisclosed
Malaysia
- Bachelor in Engineering (BEngg) in Mechanical Engineering, Electrical & Electronic Engineering, Chemical Technical/Engineering
- Bachelor of Business Administration (BBA) in Accounting & Information System, International Business
- Degree / Technical Diploma qualification ...
Posted
a month ago
MYR3,000 - MYR4,000 Sebulan
Malaysia
- Repair & Troubleshooting: Full maintenance of mechanical/hydraulic power presses (e.g., 80T–500T), including flywheels, clutches, and brake systems.
- Auxiliary Equipment: Servicing NC feeders, decoilers, and levelers to ensure precise material flow.
- Preventive Maintenance (PM): Executing the monthly PM schedule to minimize unplanned downtime. ...
Posted
8 days ago
MYR1,700 - MYR2,000 Sebulan
- Guest & Room Maintenance: Respond quickly to room calls (e.g., faulty plumbing, broken door locks, HVAC issues). Provide excellent customer service by fixing issues with minimal disruption to guests
- Preventive Maintenance (PM): Conduct routine inspections and servicing of hotel assets, including elevators, kitchen appliances, and utility systems, to prolong equipment life.
- General Repairs: Perform carpentry, painting, drywall, and basic plumbing or electrical work. Know how to locate and operate equipment shut-off valves in emergencies. ...
Posted
9 days ago
Undisclosed
Malacca City
- Leading in quality improvement activities through data analysis and monitor process performance indices on qualified processes an establish good controls.
- Owner of module Escalation Management. Responsible to analyze, monitor, and drive improvement on escalation incidents, as well as lead and manage escalation and facilitate discussion among all parties.
- Focus on enhancing L1 early detections and improvement on escapees to next process, key line detection/ screening method/ disposition method to address escapees. ...
Posted
5 days ago
Undisclosed
Malacca City
- Technical expert for lead frame / packing material in package development projects.
- Perform design, drawing and specification for lead frame based on design guideline, assembly rules and ensure design for manufacturing, quality and cost.
- Collaborate with internal and material supplier on packing material design, specification and selection; and ensure design for manufacturing, quality and cost. ...
Posted
9 days ago
Undisclosed
Malacca City
- Responsible for technical handshake and knowledge transfer to Operation.
- Generate and update relevant documents, eg Process Specification, PFMEA, DFMEA, OJTI, T32, PDR.
- Provide inputs for updating of related documents and is responsible for their correct contents, eg Process of Record, Assembly Design Rule, Process Roadmap, Failure catalogue, Control Plan, Maintenance checklist, etc for development projects. ...
Posted
17 days ago
Undisclosed
Malacca City
- Responsible for technical handshake and knowledge transfer to Operation.
- Generate and update relevant documents, eg Process Specification, PFMEA, DFMEA, OJTI, T32, PDR.
- Provide inputs for updating of related documents and is responsible for their correct contents, eg Process of Record, Assembly Design Rule, Process Roadmap, Failure catalogue, Control Plan, Maintenance checklist, etc for development projects. ...
Posted
17 days ago
Edra Power Holdings Sdn Bhd
Undisclosed
Bandaraya Melaka
- To support the operations and maintenance activities of the power station in line with the Group’s vision and mission.
- To provide technical support in ensuring compliance with Power Purchase Agreement (PPA), Gas and Fuel Supply Agreements, and corporate governance requirements.
- To support the achievement of station operational goals through coordination with operations, maintenance, engineering, and support teams. ...
Posted
4 days ago
MYR3,000 - MYR10,000 Sebulan
Malaysia
- Maintain and optimize robotic/CNC systems, troubleshoot PLC & controls, lead automation upgrades, ensure uptime, and drive process efficiency improvements. Bachelor’s Degree in Mechatronics, Electrical Engineering, Automation, or a related field. Certified or competent in PLC and robot controls (e.g., FANUC, Siemens, Mitsubishi, Allen Bradley). Minimum 8 years of experience in industrial automation, robotic programming, and CNC troubleshooting. Proven hands on experience with robotic programming, CNC troubleshooting, automation integration and teach pendants operation, PLCs, HMI systems, and fieldbus networks. Knowledge in PID tuning, parameter adjustments, and machine cycle optimization. Familiar with condition monitoring, predictive diagnostics, handling maintenance tools, and data driven machine analysis. Experience with programming languages (e.g., Python, C++, ROS) and robotic simulation tools. Familiar with CAD tools for mechanical system analysis and layout planning. RESPONSIBILITIES: Read, interpret, and modify electrical schematics, control wiring, and PLC ladder logic, including troubleshooting power and control circuits safely. Develop industrial robots, programming, operating, and troubleshooting (e.g., FANUC, KUKA, Staubli , ABB, Yaskawa) using teach pendants and robot software tools. Diagnose and repair mechanical, electrical, and control issues in CNC machines and robotic systems. Interpret and modify G code/M code, perform CNC calibration, spindle alignment, backlash compensation, and servo tuning. Develop and troubleshoot HMI screens, alarm logs, and user interfaces to ensure efficient and user friendly machine operation. Integrate sensors (vision, laser, proximity), actuators, drives, EOATs, and peripheral devices into robotic and CNC systems. Configure and troubleshoot industrial communication protocols such as Ethernet/IP, Profinet , Modbus, and other fieldbus systems. Conduct system optimization for robotic and CNC processes including cycle time improvement, synchronization, and tooling layout efficiency. lead automation upgrades, retrofits, and restoration projects, including feasibility studies and implementation. Lead new equipment purchase, installation, commissioning, and ramp up, ensuring full integration into existing systems. Perform corrective, preventive and predictive maintenance and to ensure uptime and prolong equipment life.
- Pay: RM3,000.00 - RM10,000.00 per month
- Work Location: In person
Posted
7 days ago
Undisclosed
Malacca City
- Design detailed layout, lead and coordinate execution of defined layout projects to fulfill business needs and area efficiency targets.
- Lead and coordinate design standardization for works-place, jig & fixtures to maximize productivity, reduce wastefulness and production issues, are cost-efficient, and ensure high product quality.
- Work cross-functionally with FM, ESH, IT to continuously improve good 5S and safe workplace, execution of all project and meeting required clean room protocol. ...
Posted
21 days ago
MYR2,700 - MYR4,000 Sebulan
Malaysia
- Free parking
- Health insurance
- Maternity leave ...
Posted
24 days ago
Undisclosed
Malacca City
- Development of innovative processes and process characterization methodologies for existing and new technologies.
- Perform risk assessment & identify technical challenges.
- Ensure effective technical communication and knowledge transfer to Operations. ...
Posted
5 days ago
Undisclosed
Malacca City
- Drive FMEA (Design /Process / Delta ) implement, and define quality safe launch control plans for critical milestone release of product & package development
- Collaborate & support supplier quality management (SQM) on supplier quality audits, specifically validate supplier production processes for new material & core processes equipment
- Drive package project team specifically on technical risk mitigation & technical problem solving by design in prevention / detection methods with necessary quality control plan according to project top defined FMEA (Failure Mode and Effects Analysis) ...
Posted
11 days ago
Undisclosed
- Biscuit-loving, fun-loving, optimistic, innovative, energetic, aspirational, tech-savvy, and eager to learn with a hearty zest for life, specifically humble, open, fearless and yet possessing a little edge to think and go out of the box;
- A good listener, trustworthy, reliable, honest, accountable, collegial, well-groomed and professional;
- Proactive, resourceful, detail oriented, well-organized, self-directed, and able to thrive in high-pressure situations; ...
Posted
11 days ago
Infineon Technologies
Undisclosed
Malacca City
- Attend Quality topic like customer complaints, ASSY & Test lot onhold, MRB.
- Lot on Hold cycle time.
- Analyze data for project team (ensure smooth release of the project and change management. ...
Posted
12 days ago
Undisclosed
Malacca City
- Develop innovative processes and methodologies for process characterization for both existing and new technologies.
- Collaborate with manufacturing and equipment teams to ensure effective integration of processes.
- Support the assembly of prototype and development samples. ...
Posted
12 days ago
Undisclosed
Malacca City
- Responsible or support for technical handshake and knowledge transfer to Operation.
- Generate and update relevant documents, eg Process Specification, PFMEA,DFMEA, Master FMEA, OJTI, T32, PDR
- Support prototype and development samples build. ...
Posted
13 days ago
Undisclosed
Malacca City
- Responsible for handling Equipment Workflow Automation (MES, Load & Go, Continuous Lot Processing)
- Responsible for handling 4M Automation (4M & Sigle Item Identification, Tracking & Traceability)
- Accountable for EQ Integration (SECS/GEM, Non-SECS/GEM, Cluster Controller) and Process Control Automation (Recipe Mgmt, Sampling, Metrology, SPC, FDC) ...
Posted
15 days ago
Undisclosed
Malacca City
- Responsible for documentation of development results according Preassembly development guidelines.
- Drive harmonization of established Preassembly processes with proven stable process flows including process, material & equipment.
- Characterization of unit processes and its impact to subsequent unit processes considering overall process dependencies. ...
Posted
16 days ago
Undisclosed
Malacca City
- Work with cross-functional global team to develop and own the BE-wide multi-year Autonomous Factory Roadmap & Strategy, aligning with BE’s goals and long-term operational aspirations
- Identify industry trends, emerging technologies, and innovation opportunities that can accelerate autonomy and productivity to support ideation
- Lead strategic planning cycles, ensuring roadmap and initiatives are prioritized and aligned to business value creation ...
Posted
16 days ago
Undisclosed
Malacca City
- Perform routine failure analysis tasks especially on Internal Physical Inspection (IPI) as per work instructions for the respective processes.
- Co-ordinates and performs IPI processes and meet cycle time target.
- Perform data key-in and key-out in the computer system for each of the requisitions received according to the time received and time processed. ...
Posted
7 days ago
Undisclosed
Malacca City
- Perform routine failure analysis tasks especially on Internal Physical Inspection (IPI) as per work instructions for the respective processes.
- Co-ordinates and performs IPI processes and meet cycle time target.
- Perform data key-in and key-out in the computer system for each of the requisitions received according to the time received and time processed. ...
Posted
7 days ago
Infineon Technologies
Undisclosed
Malacca City
- Responsible for technical handshake and knowledge transfer to Operation.
- Support prototype and development samples build.
- Generate and update relevant documents, e.g. Process Specification, PFMEA, DFMEA, OJTI, T32, PDR. ...
Posted
5 days ago
Infineon Technologies
Undisclosed
Malacca City
- Perform Process development activities (Process parameters scouting, optimization, verification and Process Freeze) in Development projects to meet the project targets in term of timeline, quality, cost competitiveness and manufacturability.
- Responsible for technical handshake and knowledge transfer to Operation.
- Support prototype and development samples build. ...
Posted
5 days ago
Infineon Technologies
Undisclosed
- Responsible for technical handshake and knowledge transfer to Operation.
- Support prototype and development samples build.
- Generate and update relevant documents, e.g. Process Specification, PFMEA, DFMEA, OJTI, T32, PDR. ...
Posted
5 days ago
Undisclosed
Malacca City
- Spare parts management on usage, budget control. and work on cost reductions.
- Trouble shoot and diagnose difficult, infrequent problems in a systematic approach.
- Monitor PM activities, OEE & MTBA performance, quality and yield of assembly processes. ...
Posted
19 days ago
Undisclosed
Malacca City
- Responsible or support for technical handshake and knowledge transfer to Operations.
- Generate and update relevant documents, eg Process Specification, PFMEA, DFMEA, Master FMEA, OJTI, T32, PDR.
- Support prototype and development samples build. ...
Posted
9 days ago
Infineon Technologies
Undisclosed
Malacca City
- Works with cross-functional team including module designer, and UPD to ensure tools are effective
- Liaise with procurement team, external vendors in the design and fabrication of tools, jigs and/or fixtures
- Produce blueprints, documentation and detailed technical specs for new tooling ...
Posted
14 days ago
Undisclosed
Malacca City
- Support manufacturing operations
- Develop and implement improved methods of manufacturing, procedures, and processes that result in improved efficiencies, yields, machine operations, and quality.
- Develop new automated die attach programs, optimize process parameters, and recipe standardization. ...
Posted
4 days ago
Infineon Technologies
Undisclosed
Malacca City
- Perform Process development activities (Process parameters scouting, optimization, verification and Process Freeze) in Development projects to meet the project targets in term of timeline, quality, cost competitiveness and manufacturability.
- Responsible for technical handshake and knowledge transfer to Operation.
- Support prototype and development samples build. ...
Posted
a month ago
Cari Syarikat:
Cari Kerja "manufacturing technician" Berdasarkan:
Cari Kerja "manufacturing technician" Berdasarkan: