Mechanical Jobs in Kulim - September 2026 - Urgent Hiring

Showing 68 jobs results for "mechanical" in Kulim
Never miss any updates for Mechanical jobs in Kulim
MYR3,000 - MYR5,500 Per Month
  • Install, commission, maintain, and troubleshoot semiconductor equipment.
  • Perform preventive and corrective maintenance at customer sites.
  • Diagnose machine issues and provide effective technical solutions. ...
Posted
a month ago
MYR2,300 - MYR3,300 Per Month
  • Perform daily, monthly, 3/6 monthly preventative maintenance (PM) on ATE testers, handlers, and contactors.
  • Clean and replace consumable parts like contactor pins, sockets, and indexers.
  • Perform routine calibration of the test system’s instruments (voltage sources, digital pins, parametric measurement units). ...
Posted
a month ago
MYR2,300 - MYR3,300 Per Month
  • Perform daily, monthly, 3/6 monthly preventative maintenance (PM) on ATE testers, handlers, and contactors.
  • Clean and replace consumable parts like contactor pins, sockets, and indexers.
  • Perform routine calibration of the test system’s instruments (voltage sources, digital pins, parametric measurement units). ...
Posted
a month ago
  • Inspect, troubleshoot and repair all plant mechanical equipment as directed by superior.
  • Make periodic inspections of plant equipment and report its condition to the supervisor for further evaluation.
  • Regularly communicate interdepartmentally on the status of jobs, projected completion time, and the need (if any) for assistance. ...
Posted
11 days ago

IAQ Energy Facility Management Sdn. Bhd.

  • Supervise and coordinate all activities that are carried out at the construction site.
  • Ensure that all works are carried out in accordance with project plans, specifications, and local regulations.
  • Monitor and manage sub-contractors, ensuring their compliance with project timelines and quality requirements. ...
Posted
12 days ago
  • Operations & Maintenance
  • Manage day-to-day operation of mechanical systems such as chillers, AHUs, cooling towers, pumps, compressors, and piping systems.
  • Conduct preventive and corrective maintenance to ensure equipment reliability and minimize downtime. ...
Posted
12 days ago
  • Strong mechanical engineering knowledge in HVAC, cleanroom systems, and general MEP design and coordination.
  • Experience in project management, including planning, scheduling, resource coordination, and progress reporting.
  • Ability to review and prepare technical drawings, calculations, specifications, and engineering documentation. ...
Posted
6 days ago
Posted
21 days ago
  • Design mechanical components, assemblies and sub-systems for UHP gas purification systems.
  • Size and select components as required to meet UHP gas purifier system design, performance, safety, reliability and compliance requirements.
  • Create and maintain solid models, engineering drawings, design specifications, BOMs, procedures and other required documents to support development of systems. ...
Posted
5 days ago
  • Design mechanical components, assemblies and sub-systems for UHP gas purification systems.
  • Size and select components as required to meet UHP gas purifier system design, performance, safety, reliability and compliance requirements.
  • Create and maintain solid models, engineering drawings, design specifications, BOMs, procedures and other required documents to support development of systems. ...
Posted
12 days ago
Posted
a month ago
  • Assemble mechanical components and sub-assemblies according to work instructions and engineering drawings.
  • Perform mechanical fitting, fastening, and basic adjustment of robotic equipment and systems.
  • Conduct visual inspections and basic quality checks during assembly. ...
Posted
2 days ago
  • Design and develop mechanical components and assemblies for UHP gas purification systems.
  • Select and size mechanical components based on performance, safety, and design requirements.
  • Create 3D models, 2D drawings, design procedures, and engineering documentation. ...
Posted
a month ago

IAQ ENERGY FACILITY MANAGEMENT SDN. BHD.

  • Site supervision and arrangement of site works and other activities that are carried out at the construction site;
  • Monitor work progress, assist the sub-contractors to carry out works on schedule and conform to specifications;
  • Attend meetings and liaise closely with client/ consultant as well as local authorities pertaining to the project; ...
Posted
a month ago

IAQ Energy Facility Management Sdn. Bhd.

  • Site supervision and arrangement of site works and other activities that are carried out at the construction site;
  • Monitor work progress, assist the sub-contractors to carry out works on schedule and conform to specifications;
  • Attend meetings and liaise closely with client/ consultant as well as local authorities pertaining to the project; ...
Posted
a month ago
  • Design mechanical components, assemblies and sub-systems for UHP gas purification systems.
  • Size and select components as required to meet UHP gas purifier system design, performance, safety, reliability and compliance requirements.
  • Create and maintain solid models, engineering drawings, design specifications, BOMs, procedures and other required documents to support development of systems. ...
Posted
a month ago

ALPHA MECHANICAL GLOBAL CONSTRUCTION

  • Opportunities for promotion
  • Professional development
  • Site Safety Supervisor (Yellow Book Holder) Location: Kulim, Kedah Employment Type: Contract 6 months Job Responsibilities: - Ensure compliance with OSHA 1994, FMA regulations, and company safety policies. - Conduct daily site safety inspections and identify potential hazards. - Monitor and enforce safe work practices at the project site. - Prepare and maintain safety reports, records, permits, and documentation. - Conduct toolbox meetings, safety briefings, and induction training for workers. - Investigate accidents, incidents, and near misses, and recommend corrective actions. - Coordinate with clients, consultants, subcontractors, and relevant authorities on safety matters. - Ensure proper use of PPE and implementation of safety control measures. - Assist management in achieving project safety objectives and maintaining a safe working environment. Requirements: - Valid DOSH Yellow Book (Site Safety Supervisor). - Minimum 2 years of site safety supervision experience. - Knowledge of OSHA 1994, FMA, and Malaysian safety regulations. - Good communication and report-writing skills. - Able to work independently and supervise site safety activities effectively. - Possess own transport and willing to travel if required. ...
Posted
12 days ago

AGENSI PEKERJAAN VERSATILE RISING SDN BHD

  • Diploma / Technical qualification in Engineering Drafting, Mechanical Engineering, or related field
  • Minimum 2 years’ experience as a Drafter
  • Proficient in SolidWorks ...
Posted
2 days ago
  • Collaborate with engineers to create detailed schematics and drawings using SolidWorks.
  • Perform Manufacturing Redlines and process Engineering Change Requests (ECRs).
  • Support Bill of Materials (BOM) creation and drawing updates during manufacturing changes. ...
Posted
6 days ago
  • SolidWorks: 1 year (Required)
  • Mechanical drawings: 1 year (Preferred)
  • Job Summary: ...
Posted
12 days ago
  • Develop and optimize manufacturing processes by designing and conducting analysis programs, applying knowledge of product design and fabrication, and implementing strategies to improve efficiency, reduce costs, and enhance product quality.
  • Improve manufacturing efficiency through workflow analysis, space planning, and equipment layout design. Ensure product and process quality by establishing testing methods, validating process capabilities, and setting standards.
  • Provide data-driven insights for manufacturing decisions and risk-based solutions to minimize production issues and meet On-Time Shipment (OTS) targets. Prepare detailed reports by collecting, analyzing, and summarizing trends. ...
Posted
16 hours ago
  • Job Title:
Posted
16 hours ago
  • Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators.
  • Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors.
  • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. ...
Posted
7 days ago
  • Conduct cycle time studies and evaluate current operational processes.
  • Collect, organize, and analyze production and workflow data to identify trends and improvement opportunities.
  • Support routing analysis and recommend improvements to enhance operational efficiency. ...
Posted
12 days ago
  • Perform ongoing preventive maintenance and repairs on mechanical, electrical, and other building systems.
  • Conduct routine maintenance inspections, diagnose potential problems, and make repairs.
  • Assist with the installation and modification of building equipment and systems. ...
Posted
12 days ago
Posted
12 days ago
  • Prepare FA reports that can lead to root cause finding and corrective action to cross functional team.
Posted
8 days ago
  • Perform up to medium level of Discrete and IC FA including electrical verification and fault isolation on package and wafer samples.
  • Perform sample preparation and microscopy inspection for clear visualization of package and wafer level defects
  • Prepare FA reports that can lead to root cause finding and corrective action to cross functional team. ...
Posted
8 days ago

UEC Cleanroon Solutions Snd Bhd

  • Preapare Quotation & Documentation
  • Provide technical expertise and guidance to project teams, ensuring adherence to engineering principles, building codes, and safety regulations
  • Develop and monitor project plans, schedules, and budgets, identifying and mitigating risks proactively ...
Posted
11 days ago
  • #WeAreIn for jobs that impact everyone's life. Dreaming about massive machines, precision processes, and the transformation of sand into groundbreaking tech? As a Industrial Trainee - Maintenance and Equipment Engineering in our Manufacturing and Operations team, find yourself in a high-tech world where silicon wafers evolve into cutting-edge products. In our advanced cleanroom environment, every detail count, and your expertise will help shape the future, one innovation at a time. Are you in?
Posted
21 days ago