Jobs
Companies
Forums
Quality Control Qc Jobs in Pulau Pinang - September 2026 - Urgent Hiring
Showing 287 jobs results for
"quality control qc"
in Pulau Pinang
Never miss any updates for Quality Control Qc jobs in Pulau Pinang
Manage Alert
Undisclosed
- Control manufacturing process and monitor quality performance both internal & external, review quality data with related persons regularly.
- Coordinate quality improvement activities for process stability and product quality, to implement process audit and hold quality meeting, etc.
- Handle quality issue happened in AE process and customer side, implement containment action, investigate the root cause, follow up corrective actions and response to related person/department, and Product Hold process follow up. ...
Posted
22 days ago
MYR500 - MYR1,000 Per Month
Prai
- Support recruitment, onboarding, employee engagement, and HR administration.
- Assist with HR projects, employee data management, and process improvement initiatives.
- Support manufacturing engineering activities and operational improvements. ...
Posted
22 days ago
Undisclosed
George Town
- Perform product testing activities in accordance with production work instructions, ensuring products meet quality, safety, and manufacturing standards.
- Troubleshoot test failures, perform debugging and minor rework, and support failure analysis to identify root causes and minimize production downtime.
- Operate, maintain, and calibrate test equipment and fixtures while ensuring workstations comply with 5S and equipment maintenance requirements. ...
Posted
18 days ago
Undisclosed
- Work and interact with a wide variety of NI staff in R&D software and hardware organizations, as well as employees from other business groups, in Austin, Texas, Debrecen, Hungary and Penang, Malaysia.
- Validate automated test solutions (using Gage R & R, as well as other methods) for the manufacture of test and measurements instruments and hold required reviews to assure test system readiness for product release.
- Full ownership of test solutions after deployment on production floor. Ensure test solutions owned are in good condition and readily available for NI Operations and Services. ...
Posted
17 days ago
Undisclosed
George Town
- Perform product testing activities in accordance with production work instructions, ensuring products meet quality, safety, and manufacturing standards.
- Troubleshoot test failures, perform debugging and minor rework, and support failure analysis to identify root causes and minimize production downtime.
- Operate, maintain, and calibrate test equipment and fixtures while ensuring workstations comply with 5S and equipment maintenance requirements. ...
Posted
19 days ago
Two95 International Inc.
Undisclosed
George Town
- Design, develop and maintain moderate to highly complex applications using C++.
- Develop, enhance and debug software modules and components.
- Apply strong OOP principles — encapsulation, inheritance, polymorphism and abstraction — to build maintainable and scalable systems. ...
Posted
19 days ago
Undisclosed
- Review product and process indicator to ensure product conform to quality requirement
- Trigger product containment when there is non conformity
- Coordinate MRB for disposition of non conformance parts ...
Posted
a month ago
MYR6,000 - MYR8,000 Per Month
Prai
- Monitor and control the quality of connector products throughout the production process.
- Perform incoming, in-process, and final inspection according to specifications and quality standards.
- Prepare and maintain QC inspection reports, records, and quality documentation. ...
Posted
a month ago
MYR1,700 - MYR2,100 Per Month
- Additional leave
- Free parking
- Maternity leave ...
Posted
a month ago
Undisclosed
Malaysia
- Product Quality Oversight and Failure Analysis:
- Lead Outgoing Quality Assurance (OQA) and Ongoing Reliability Test (ORT) monitoring, proactively identifying quality trends and resolving anomalies to ensure high product reliability.
- Conduct in-depth failure analysis, root cause investigation, and corrective action implementation to improve overall product quality. ...
Posted
20 days ago
Undisclosed
Malaysia
- Ensure execution of PQP (Product Quality Planning) delivered from design site QPM (Quality Program Manager)
- Ensure the factory NPI production line under quality control, firewall/line stop control.
- Leadership inside factory NPI production / process driving for actions on all build issues (Manufacturing/Design) ...
Posted
9 days ago
MYR9,000 - MYR10,800 Per Month
Bayan Baru
- Lead and manage the Quality Assurance team supporting semiconductor assembly and manufacturing operations.
- Establish, implement, and maintain quality systems, procedures, standards, and control plans.
- Oversee quality performance across semiconductor assembly, production, and technical processes. ...
Posted
a month ago
Undisclosed
- Focused on memory sub-system validation
- Provide DDR technical leadership in the development of new test & validation
- Develop and execute system level memory sub-system validation test plans across products ...
Posted
22 days ago
Undisclosed
- Software Quality Engineering (Validation)The Software Engineering team delivers next-generation application enhancements and new products for a changing world. Working at the cutting edge, we design and develop software for platforms, peripherals, applications and diagnostics - all with the most advanced technologies, tools, software engineering methodologies and the collaboration of internal and external partners.Join us to do the best work of your career and make a profound social impact as a Software Quality Engineer 2 on our Global Test Engineering Team in Bukit Mertajam, Penang.What you’ll achieveAs a Software Quality Engineer 2, you will be responsible for validating Dell Factory Install framework/process on both commercial and consumer systems. These efforts will be carried out monthly for sustaining platforms and on demand for NPI platforms.
Posted
22 days ago
Comet Plasma Control Technologies
Undisclosed
George Town
- Lead global supplier quality activities across supplier selection, qualification, NPI, audits, development, and performance improvement.
- Drive APQP, PPAP, FAI, Safe Launch, and supplier readiness to ensure quality and process capability requirements are met.
- Conduct supplier audits, process assessments, and technical reviews to evaluate manufacturing capability and quality controls. ...
Posted
13 days ago
MYR2,100 - MYR3,000 Per Month
- Responsible for the tester maintaining, repairing, and spare parts management.
- Prepare master maintenance, calibration schedule, perform predictive and preventive maintenance
- To handle spare parts management or tester repair and services. ...
Posted
a month ago
1Millennium International Sdn Bhd
MYR3,500 - MYR4,500 Per Month
Malaysia
- Act as the primary point of contact for all quality-related disputes involving third-party vendors on-site.
- Lead "Joint Inspections" with customer representatives and other vendors to reach a consensus on technical issues.
- Perform on-site forensic analysis of material discrepancies (e.g. Quantity mismatch, fitment issues, material grade mismatches, or performance failures) ...
Posted
22 days ago
Undisclosed
- WD thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution.
Posted
a month ago
Undisclosed
- Job Title: Quality & Compliance Engineer
- Base: Batu Kawan, Penang / Kuala Lumpur
- Why Join Us? ...
Posted
a month ago
Undisclosed
Malaysia
- Develop and implement functional test solutions that satisfy the customer’s product requirement.
- Development activities include test specification analysis, defining test specification, test system/fixture hardware design, software development, and mechanical design (by engaging with mechanical vendors).
- Implementation activities include system integration, software coding and debugging, test system build support, installation, user training, and start-up support. ...
Posted
a month ago
MYR2,000 - MYR3,000 Per Month
- Opportunities for promotion
- Professional development
- *Job Vacancy: Quality Technician* ...
Posted
22 days ago
MYR800 - MYR800 Per Month
- Assist in performing incoming, in-process, and final product inspections.
- Support data collection for quality analysis and reporting.
- Help in documenting inspection results and ensuring proper records are maintained. ...
Posted
22 days ago
Undisclosed
Bandar Perai Jaya
- Initiate projects related to product, process, quality systems, or yield improvement based on internal and external quality indicators.
- Develop and implement systems that improve quality and ensure sustainable results, therefore driving continuous improvement.
- Use advanced measurement tools, techniques, and test equipment and be able to understand and analyze results. ...
Posted
a month ago
MYR2,000 - MYR2,000 Per Month
- Dental insurance
- Free parking
- Health insurance ...
Posted
a month ago
Undisclosed
George Town
- Support systematic problem-solving methodologies to resolve complex product and process quality issues across the product lifecycle.
- Provide quality engineering assessment on cross-functional new product development teams, ensuring robust design inputs, verification and validation strategies and regulatory compliance.
- Drive the implementation and continuous improvement of risk management activities, including hazard analysis, fault tree analysis and FMEAs, ensuring alignment with ISO 14971 and internal standards. ...
Posted
a month ago
Toshiba Elevator Manufacturing Asia Sdn Bhd
MYR1,800 - MYR2,700 Per Month
Prai
- Quality & Parts Inspection: Carry out parts inspection according to Quality Inspection Standards to ensure all mechanical components meet specification.
- Process & Delivery Monitoring: Monitor lot movement to ensure cycle times and on-time delivery requirements are consistently met.
- Quality Standards & Operations: Control and manage department operations to align with overall Quality & Procedures guidelines. ...
Posted
a month ago
Undisclosed
George Town
- Support systematic problem-solving methodologies to resolve complex product and process quality issues across the product lifecycle.
- Provide quality engineering assessment on cross-functional new product development teams, ensuring robust design inputs, verification and validation strategies and regulatory compliance.
- Drive the implementation and continuous improvement of risk management activities, including hazard analysis, fault tree analysis and FMEAs, ensuring alignment with ISO 14971 and internal standards. ...
Posted
a month ago
MYR1,800 - MYR2,800 Per Month
Prai
- Supervise SMT QA/QC inspectors, assign daily tasks, and monitor their performance
- Ensure compliance with SMT QA procedures, standards, and documentation in compliance with ISO, IPC, and other applicable standards
- Conduct quality audits and inspections on SMT lines, including First Article, in-process, and final inspections ...
Posted
a month ago
Job searches related to “Quality Control Qc”
Browse Location:
More Location
Browse Company:
More Companies
Browse "quality control qc" Job By:
Browse "quality control qc" Job By:
More Industries