Senior Technician Jobs in Kulim - June 2026 - Urgent Hiring

Showing 43 jobs results for "senior technician" in Kulim

Never miss any updates for Senior Technician jobs

MYR3,500 - MYR4,500 Per Month
  • Perform diagnostics, troubleshooting, repair, and maintenance on automotive mechanical and electrical systems.
  • Inspect vehicles and identify faults using computerized diagnostic equipment and technical manuals.
  • Carry out servicing and repairs for engines, transmissions, brakes, suspension, steering, and air-conditioning systems. ...
Posted
24 days ago
Undisclosed
  • Develop Si Power MOSFET wafer technologies and product features to realize new powerdevices that meet the performance, cost, and quality targets.
  • Drive experiments from the process split definition to the realization in the clean room, analyze available in-line metrology and electrical test data.
  • Ensure process stability, quality of the manufacturing route for the mass-production release. ...
Posted
5 days ago
Undisclosed
  • Responsible for setup of unit process development for both new and refurbished tools to achieve cost target with high quality in timely manner.
  • Responsible for setup of unit process for new transfer technologies to ensure successful qualification, yield learning and production ramp.
  • Assessment of process changes and process change management ...
Posted
2 days ago
Undisclosed
  • Responsible for setup of unit process development for both new and refurbished tools to achieve cost target with high quality in timely manner.
  • Responsible for setup of unit process for new transfer technologies to ensure successful qualification, yield learning and production ramp.
  • Assessment of process changes and process change management ...
Posted
2 days ago
Undisclosed
  • Perform Discrete Devices and PCM Failure Analysis [FA] on wafer and package level from electrical verification, fault isolation and physical root cause analysis.
  • Prepare FA reports that can lead to root cause finding and corrective action to cross functional team.
  • Participate and present FA results in cross functional meetings and yield improvement. ...
Posted
14 days ago
Undisclosed
  • Perform Discrete Devices and PCM Failure Analysis [FA] on wafer and package level from electrical verification, fault isolation and physical root cause analysis.
  • Prepare FA reports that can lead to root cause finding and corrective action to cross functional team.
  • Participate and present FA results in cross functional meetings and yield improvement. ...
Posted
14 days ago
Undisclosed
  • Establish, implement, and manage quality programs and activities
  • Manage product compliance and quality activities, including process control, nonconformance handling, and customer complaints
  • Drive root cause analysis, corrective actions (8D), and continuous quality improvements ...
Posted
4 days ago
Undisclosed
  • Act as a technical expert for metrology and measurement systems.
  • Review engineering drawings for measurability and define measurement methods.
  • Perform advanced measurement and inspection, including programming complex tools (e.g., VMM). ...
Posted
a month ago
Undisclosed
  • Act as a technical expert for metrology and measurement systems.
  • Review engineering drawings for measurability and define measurement methods.
  • Perform advanced measurement and inspection, including programming complex tools (e.g., VMM). ...
Posted
a month ago
Undisclosed
  • Develop Si Power MOSFET wafer technologies and product features to realize new powerdevices that meet the performance, cost, and quality targets.
  • Drive experiments from the process split definition to the realization in the clean room, analyze available in-line metrology and electrical test data.
  • Ensure process stability, quality of the manufacturing route for the mass-production release. ...
Posted
a month ago
Undisclosed
  • Job Title:
  • Job Description:
  • The Role: Senior Engineer, Quality Engineering, APS ...
Posted
25 days ago
Undisclosed
  • Establish, implement, and manage quality programs and activities
  • Manage product compliance and quality activities, including process control, nonconformance handling, and customer complaints
  • Drive root cause analysis, corrective actions (8D), and continuous quality improvements ...
Posted
a month ago
Undisclosed
  • Support new product development and the existing supplier base to lead onsite assessment and qualification of materials suppliers, identifying gaps/opportunities, driving gap closure and continuous improvement actions/projects.
  • Work with a Global team and support local and global issues if required.
  • Understand the supplier’s processes and how the raw material has an impact on Entegris products and customers’ application. ...
Posted
a month ago
Undisclosed
  • Perform process transfer, process development, optimization and qualification for technology transfer and/or used tool transfer
  • Development of innovative processes and process characterization methodologies for existing and new technologies
  • Partnering with production module/department, technology integration, planning, business divisions and global process development counterparts in mapping and enabling future technologies ...
Posted
3 days ago
Undisclosed
  • Define test concepts and perform test simulations to ensure the robustness of the test solution
  • Design test hardware for automated test equipment (ATE)
  • Code and debug test programs ...
Posted
17 days ago
Undisclosed
  • Perform process transfer, process development, optimization and qualification for technology transfer and/or used tool transfer
  • Development of innovative processes and process characterization methodologies for existing and new technologies
  • Partnering with production module/department, technology integration, planning, business divisions and global process development counterparts in mapping and enabling future technologies ...
Posted
25 days ago
Undisclosed
  • Set up and configure platforms for comprehensive stress testing procedures.
  • Equipment including PCs, equipment racks, cabling, liquid cooling systems and any other specified items.
  • Measurement tools including multimeters, temperature probes, oscilloscopes, power supplies, and other data acquisition hardware ...
Posted
21 hours ago
Undisclosed
  • Establish and govern PFMEA and Control Plan standards across Compounding, Dipping, and downstream processes.
  • Ensure PFMEA and Control Plans are developed, maintained, reviewed, and updated as living documents.
  • Drive identification and mitigation of process risks impacting product quality, yield, scrap, rework, and operational stability. ...
Posted
a month ago
Undisclosed
  • Establish and govern PFMEA and Control Plan standards across Compounding, Dipping, and downstream processes.
  • Ensure PFMEA and Control Plans are developed, maintained, reviewed, and updated as living documents.
  • Drive identification and mitigation of process risks impacting product quality, yield, scrap, rework, and operational stability. ...
Posted
a month ago
Undisclosed
  • Support yield and quality improvement programs
  • Lots assessment & disposition to ensure quality of products delivered to customers meet Infineon’s quality and reliability standard
  • Investigate and provide fast feedback to production line in case of deviation ...
Posted
7 days ago
Undisclosed
  • Identify problems or unfavorable deviations, recommend and execute/implement corrective/improvement actions which enhance the quality, reliability or cost effectiveness in the area of responsibility.
  • Highly experienced Semiconductor Failure Analysis Engineer with a comprehensive background in SEM/EDX, FIB Circuit Editing, and advanced Package Analysis.
  • Proven expertise in executing non-destructive evaluations (X-Ray, CSAM) and destructive analysis (Laser/Acid Decapsulation). ...
Posted
14 days ago
Undisclosed
  • Perform electrical wiring, control panel assembly, and machine installation for industrial automation systems.
  • Support machine testing, commissioning, IO checking, signal tracing, and system verification activities.
  • Troubleshoot electrical systems, sensors, motors, relays, and automation components during machine build and startup. ...
Posted
14 days ago
Undisclosed
  • Advise process engineers and technicians, providing guidelines for optimal molding conditions.
  • Maintain knowledge of statistical process control (SPC) procedures to reduce scrap and produce quality parts. Establish and enhance SPC control and practices.
  • Coordinate and sample new tools and materials to determine the most appropriate methods for manufacturing company products. Document new tools and materials extensively. Review capability studies on new and existing tools and processes, recommending corrective actions for areas not meeting specifications. ...
Posted
17 days ago
Undisclosed
  • Monitor daily quality performance and support molding/assembly production lines.
  • Perform quality investigations, root-cause analysis, and support corrective/preventive actions.
  • Review inspection results, manage non-conformance reports, and support timely disposition. ...
Posted
17 days ago
Undisclosed
  • Develop Si Power IGBT/Diode and/or Silicon Carbide Power MOSFET wafer technologies and product features to realize new power devices that meet the performance, cost, and quality targets
  • Plan, design, perform and evaluate process experiments (including DoEs)
  • Be responsible for the definition of unit process requirements ...
Posted
18 days ago

Agensi Pekerjaan Ema Sdn. Bhd.

MYR1,800 - MYR2,500 Per Month
  • CNC Machine Operation: Operate and set up CNC machines according to production requirements while ensuring machines run smoothly and efficiently.
  • Machine Maintenance & Troubleshooting: Perform routine machine maintenance, update maintenance records, and assist in troubleshooting machine issues when necessary.
  • Quality Inspection: Check raw materials and finished products through visual and measurement inspections to ensure they meet quality requirements. ...
Posted
6 days ago

Agensi Pekerjaan EMA Sdn. Bhd.

MYR1,800 - MYR2,500 Per Month
  • CNC Machine Operation: Operate and set up CNC machines according to production requirements while ensuring machines run smoothly and efficiently.
  • Machine Maintenance & Troubleshooting: Perform routine machine maintenance, update maintenance records, and assist in troubleshooting machine issues when necessary.
  • Quality Inspection: Check raw materials and finished products through visual and measurement inspections to ensure they meet quality requirements. ...
Posted
6 days ago
Undisclosed
  • Set up, operate, and monitor CNC machines and related equipment.
  • Load raw materials and unload finished components safely and efficiently.
  • Read and interpret engineering drawings, specifications, and work orders. ...
Posted
7 days ago
Undisclosed
  • Support development of new GaN devices and technology architectures based on customers and company needs.
  • Define design rules & test methodologies.
  • Take ownership on assigned development packages ...
Posted
21 days ago
MYR3,000 - MYR3,500 Per Month
  • Opportunities for promotion
  • Professional development
  • We are looking for a hands-on, proactive Project Engineer who loves turning complex designs into reality. You will be the technical engine of our projects, solving real-world challenges on the ground and driving execution from concept to handover. You will work closely with leadership to ensure our engineering standards are met without compromising timeline or budget. ...
Posted
23 days ago