Software Jobs in Bayan Lepas - September 2026 - Urgent Hiring
Showing 34 jobs results for
"software"
in Bayan Lepas
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
4 days ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
4 days ago
Industrial Automation Sales Consultant
MYR6,000 - MYR9,000 Per Month
- Develop new business opportunities and grow existing industrial accounts.
- Promote Factory Automation, mechanical components, industrial parts, MRO, and engineering solutions.
- Develop customers within manufacturing, semiconductor, electronics, and industrial sectors. ...
Posted
6 days ago
MYR2,500 - MYR3,300 Per Month
- Conduct functional testing on electronic module samples, including measurement of parameters such as Output Motor (V), Cut-off Output Current (A), and Cut-off Timing (S)
- Perform AM2 measurements, including analysis of Energy Curves and Spike Curves
- Support flashing of software into electronic module devices ...
Posted
2 months ago
MYR5,500 - MYR6,300 Per Month
- Documents selection of components/subassemblies to deliver required performance and compliance specifications.
- Interacts with other engineering disciplines to define component requirements and/or modify component selections.
- Works under discretion of Sr Component Engineers to analyze designs to recommend optimal selection of components and/or subassemblies. ...
Posted
2 months ago
MYR3,500 - MYR5,000 Per Month
- Operate CNC turning machines to manufacture precision parts and components according to specifications
- Set up, program, and monitor CNC machines to ensure optimal performance and productivity
- Perform routine maintenance and troubleshooting on CNC machines to maintain their optimal condition ...
Posted
2 months ago
MYR3,000 - MYR4,000 Per Month
- To operate complex equipment and analytical tools in ESD environment.
- Operating and using Central Lab support, Package and Physical FA techniques; BKM to satisfy all FA need.
- Taking up the responsibilities of equipment ownership, development and proliferation to users if identified. ...
Posted
2 months ago
MYR5,000 - MYR7,000 Per Month
- Develop machine operation systems by designing, developing, and installing software solutions.
- Debug on machine if there is any software related issues.
- Customer Side Software issue support if required. ...
Posted
17 days ago
MYR1,700 - MYR1,800 Per Month
- Responsible for reliability testing support with loading and unloading of integrated circuit devices onto biased boards and chambers activities. Ensure to meet cycle time and zero quality issue.
- Support electrical testing and data-logging of integrated circuit devices using automated test equipment.
- Bench testing and debugging of reliability test circuits / boards verification. ...
Posted
2 months ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago
MYR4,000 - MYR5,500 Per Month
- Perform rack & stack installation of servers, switches, and storage equipment
- Install and manage fiber and copper cabling (RJ45, LC, SC connectors)
- Handle server landing (new deployment) and configuration support ...
Posted
20 days ago
MYR3,000 - MYR3,600 Per Month
- Perform electrical validation and fault isolation on failed products.
- Identify and analyze physical defects related to electrical failures.
- Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Posted
2 months ago
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Posted
a month ago
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Posted
a month ago
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
MYR3,000 - MYR6,000 Per Month
- Perform inspection and verification of incoming raw materials, components, and parts to ensure compliance with specifications and quality standards.
- Work closely with suppliers to address incoming quality issues and drive continuous improvement.
- Support supplier quality activities including supplier audits and corrective actions. ...
Posted
a month ago
MYR5,500 - MYR6,300 Per Month
- Documents selection of components/subassemblies to deliver required performance and compliance specifications.
- Interacts with other engineering disciplines to define component requirements and/or modify component selections.
- Works under discretion of Sr Component Engineers to analyze designs to recommend optimal selection of components and/or subassemblies. ...
Posted
2 months ago
MYR4,000 - MYR5,500 Per Month
- Perform rack & stack installation of servers, switches, and storage equipment
- Install and manage fiber and copper cabling (RJ45, LC, SC connectors)
- Handle server landing (new deployment) and configuration support ...
Posted
20 days ago
MYR4,000 - MYR5,500 Per Month
- Perform rack & stack installation of servers, switches, and storage equipment
- Install and manage fiber and copper cabling (RJ45, LC, SC connectors)
- Handle server landing (new deployment) and configuration support ...
Be an early applicant!
Posted
20 days ago
MYR4,000 - MYR5,500 Per Month
- Perform rack & stack installation of servers, switches, and storage equipment
- Install and manage fiber and copper cabling (RJ45, LC, SC connectors)
- Handle server landing (new deployment) and configuration support ...
Be an early applicant!
Posted
20 days ago
MYR4,000 - MYR5,500 Per Month
- Perform rack & stack installation of servers, switches, and storage equipment
- Install and manage fiber and copper cabling (RJ45, LC, SC connectors)
- Handle server landing (new deployment) and configuration support ...
Be an early applicant!
Posted
20 days ago
MYR3,000 - MYR4,000 Per Month
- To operate complex equipment and analytical tools in ESD environment.
- Operating and using Central Lab support, Package and Physical FA techniques; BKM to satisfy all FA need.
- Taking up the responsibilities of equipment ownership, development and proliferation to users if identified. ...
Posted
2 months ago
MYR3,000 - MYR4,000 Per Month
- To operate complex equipment and analytical tools in ESD environment.
- Operating and using Central Lab support, Package and Physical FA techniques; BKM to satisfy all FA need.
- Taking up the responsibilities of equipment ownership, development and proliferation to users if identified. ...
Posted
2 months ago
MYR5,500 - MYR6,300 Per Month
- Documents selection of components/subassemblies to deliver required performance and compliance specifications.
- Interacts with other engineering disciplines to define component requirements and/or modify component selections.
- Works under discretion of Sr Component Engineers to analyze designs to recommend optimal selection of components and/or subassemblies. ...
Posted
2 months ago
MYR5,500 - MYR6,300 Per Month
- Documents selection of components/subassemblies to deliver required performance and compliance specifications.
- Interacts with other engineering disciplines to define component requirements and/or modify component selections.
- Works under discretion of Sr Component Engineers to analyze designs to recommend optimal selection of components and/or subassemblies. ...
Posted
2 months ago
MYR3,000 - MYR4,000 Per Month
- To operate complex equipment and analytical tools in ESD environment.
- Operating and using Central Lab support, Package and Physical FA techniques; BKM to satisfy all FA need.
- Taking up the responsibilities of equipment ownership, development and proliferation to users if identified. ...
Posted
2 months ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago
MYR3,000 - MYR3,600 Per Month
- Perform electrical validation and fault isolation on failed products.
- Identify and analyze physical defects related to electrical failures.
- Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Posted
2 months ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago
Job searches related to “Software”