Jobs
Companies
Forums
98 Texas Instruments Jobs - October 2026 - Urgent Hiring
Showing 98 jobs results for
"texas instruments"
Never miss any updates for Texas Instruments jobs
Manage Alert
Undisclosed
KL City
- Opportunities to cultivate business acumen and own the organization’s financials
- Collaborative leadership to align financial forecasts with investment strategy and drive for results in a dynamic environment
- Ability to think strategically, innovate, realize efficiencies, and influence organizational decisions ...
Posted
a day ago
Undisclosed
KL City
- Responsible for balancing books periodically by preparing and posting journal entries, maintaining and reconciling ledger accounts, providing record of assets, liabilities and other financial transactions.
- Responsible for preparing profit and loss statement, and balance sheet statement to management team and external parties.
- Prepare and be responsible for internal or external reporting required within Malaysia by collecting data, analyzing, and investigating variances, and summarizing data and trends. ...
Posted
a day ago
Undisclosed
Malaysia
- Opportunities to cultivate business acumen and own the organization’s financials
- Collaborative leadership to align financial forecasts with investment strategy and drive for results in a dynamic environment
- Ability to think strategically, innovate, realize efficiencies, and influence organizational decisions ...
Posted
18 hours ago
Undisclosed
KL City
- Liaison with the other TI sites for best practice sharing and process improvements.
- Bachelor’s Degree in Accountancy (Hons.) or equivalent with full professional qualification of CPA, ACCA, CIMA or equivalent.
- Fresh graduates (0-2) years experience are welcome to apply, preference for general ledger accounting experience. ...
Posted
17 hours ago
Undisclosed
Malaysia
- Plan and administer policies and procedures
- Make recommendations on direct/indirect labor
- Support and implement direct labor staffing plan for semiconductor manufacturing team ...
Posted
4 days ago
Undisclosed
Malacca City
- Plan and administer policies and procedures
- Make recommendations on direct/indirect labor
- Support and implement direct labor staffing plan for semiconductor manufacturing team ...
Posted
4 days ago
Undisclosed
KL City
- The candidate should hold a valid ST JEK competency at 11 kV, 33 kV or 132 kV, with strong HV electrical experience. Candidates with 11 kV or 33 kV competency will be expected to develop the required knowledge, site experience and competency toward supporting the site's 132 kV Resident Engineer requirements.
- To act as a registered competent person and advisor for the company on Electricity Supply Act 447 and Electricity Regulation 1994. Responsible to ensure compliance to the stipulated act and perform the full duty of a 11kV, 33kV or 132kV resident engineer as stipulated in the act.
- Liaison between owner and energy commission in any mode of communications including the submission of weekly Borang I to ST ...
Posted
5 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Drive EOL manufacturing process design (Mold and STF) within the MES. Define process flows, routing, material handling, and traceability.
- Control & Exception Handling: Define digital process controls and exception handling logic (e.g., Mold cure excursions and STF dimension/trimming holds, rework, and material disposition).
- Validation & Alignment: Align requirements with manufacturing and quality teams. Validate proposed digital workflows and support UAT and deployment for both process areas. ...
Posted
6 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Represent EOL Equipment Engineering in the MES rollout. Define equipment workflows, setup/recipe controls, qualification requirements, equipment states, and interlocks for both Mold and STF machines.
- Digital Integration: Translate physical shop-floor requirements (e.g., Mold cure/pressure/temp and STF mechanical/trimming parameters) into digital process designs and data collection needs.
- Validation: Validate equipment integration scenarios and support User Acceptance Testing (UAT) and deployment for both process areas. ...
Posted
6 days ago
Undisclosed
KL City
- Develop, apply, revise, and maintain quality standards for incoming materials and components sourced from external suppliers and vendors
- Lead supplier qualification activities including initial audits, capability assessments, and approval processes for new or existing suppliers
- Review and analyze supplier quality data, inspection reports, and returned/rejected materials to identify trends and systemic issues ...
Posted
6 days ago
Undisclosed
Malacca City
- Lead MEP coordination for tool hook-up, facilities utility expansion, and cleanroom conversion projects from planning through installation, commissioning, and final handover
- Review design drawings, layouts, technical submittals, and construction packages to ensure readiness for execution
- Coordinate facility electrical and mechanical utility expansion required to support new tools, production capacity increases, and factory infrastructure upgrades ...
Posted
6 days ago
Undisclosed
KL City
- Evaluating, selecting, and ordering equipment that is most appropriate and cost effective for the manufacture of company products
- Overseeing the installation, modification, upgrade and maintenance of manufacturing equipment
- Keeping current on equipment manufacturers' technical notices, upgrades and safety issues ...
Posted
6 days ago
Undisclosed
KL City
- Develop, apply, revise, and maintain quality standards for incoming materials and components sourced from external suppliers and vendors
- Lead supplier qualification activities including initial audits, capability assessments, and approval processes for new or existing suppliers
- Review and analyze supplier quality data, inspection reports, and returned/rejected materials to identify trends and systemic issues ...
Posted
6 days ago
Undisclosed
Malacca City
- Lead and collaborate with engineering and manufacturing teams on continuous improvement projects aligned with quality objectives.
- Support internal and external audits, including compliance with IATF 16949 standards & VDA 6.3 standards
- Monitor and analyze in-line quality metrics, defect trends. Drive multidisciplinary team towards root cause investigation and solution to improve LRR trend. ...
Posted
6 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Represent EOL Equipment Engineering in the MES rollout. Define equipment workflows, setup/recipe controls, qualification requirements, equipment states, and interlocks for both Mold and STF machines.
- Digital Integration: Translate physical shop-floor requirements (e.g., Mold cure/pressure/temp and STF mechanical/trimming parameters) into digital process designs and data collection needs.
- Validation: Validate equipment integration scenarios and support User Acceptance Testing (UAT) and deployment for both process areas. ...
Posted
6 days ago
Undisclosed
KL City
- Discipline Technical Depth & Cross-Site Standardization
- Build strong technical depth within the water discipline and ensure consistent technology execution and standardized engineering standards across all sites.
- Centralize technical knowledge, failure analysis data, and lesson-learned databases to replace localized site practices with enterprise-level best practices. ...
Posted
6 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Drive EOL manufacturing process design (Mold and STF) within the MES. Define process flows, routing, material handling, and traceability.
- Control & Exception Handling: Define digital process controls and exception handling logic (e.g., Mold cure excursions and STF dimension/trimming holds, rework, and material disposition).
- Validation & Alignment: Align requirements with manufacturing and quality teams. Validate proposed digital workflows and support UAT and deployment for both process areas. ...
Posted
6 days ago
Undisclosed
Malacca City
- Lead and collaborate with engineering and manufacturing teams on continuous improvement projects aligned with quality objectives.
- Support internal and external audits, including compliance with IATF 16949 standards & VDA 6.3 standards
- Monitor and analyze in-line quality metrics, defect trends. Drive multidisciplinary team towards root cause investigation and solution to improve LRR trend. ...
Posted
6 days ago
Undisclosed
Malacca City
- High School diploma or equivalent (GED)
- Ability to follow work directions
- Strong verbal and written communication skills ...
Posted
6 days ago
Undisclosed
Malacca City
- To act as a registered competent person and advisor for the company on Electricity Supply Act 447 and Electricity Regulation 1994. Responsible to ensure compliance to the stipulated act and perform the full duty of a 132kV resident engineer as stipulated in the act.
- Liaison between owner and energy commission in any mode of communications including the submission of weekly Borang I to ST
- Responsible to sign IOM between owner and TNB ...
Posted
6 days ago
Undisclosed
Malaysia
- High School diploma or equivalent (GED)
- Ability to follow work directions
- Strong verbal and written communication skills ...
Posted
6 days ago
Undisclosed
Malacca City
- High School diploma or equivalent (GED)
- Ability to follow work directions
- Strong verbal and written communication skills ...
Posted
6 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Drive manufacturing process design within the MES. Define process flows, routing, material handling, and traceability.
- Control & Exception Handling: Design the digital logic for process controls and exception handling, including automated holds, rework loops, and material disposition.
- Alignment & Validation: Align requirements between manufacturing and quality teams. Validate proposed digital workflows and support UAT and deployment. ...
Posted
7 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Represent Test and Plating equipment engineering in the MES rollout. Define workflows, recipe controls, and equipment states.
- Integration & Data: Translate Test (handler/tester) and Plating (chemical/mechanical) requirements into digital designs. Define data collection needs for critical process parameters.
- Validation: Validate integration scenarios and support UAT and deployment. ...
Posted
7 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Represent Turret, Tape & Reel equipment engineering in the MES rollout. Define workflows, setup/recipe controls, and equipment states.
- Integration & Data: Translate Turret, Tape & Reel hardware requirements (e.g., vision-based inspection, winding/packaging mechanics) into digital designs. Define data collection needs.
- Validation: Validate integration scenarios and support UAT and deployment. ...
Posted
7 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Represent equipment engineering in the MES rollout. Define equipment-specific workflows, setup/recipe controls, qualification requirements, and equipment states.
- Integration & Data: Translate physical shop-floor requirements into digital process designs. Define data collection needs and equipment interlocks to ensure seamless hardware-to-software communication.
- Validation: Validate equipment integration scenarios and lead User Acceptance Testing (UAT) and deployment on the production floor. ...
Posted
7 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Drive manufacturing process design within the MES. Define process flows, routing, material handling, and traceability.
- Control & Exception Handling: Design the digital logic for process controls and exception handling, including automated holds, rework loops, and material disposition.
- Alignment & Validation: Align requirements between manufacturing and quality teams. Validate proposed digital workflows and support UAT and deployment. ...
Posted
7 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Represent Test and Plating equipment engineering in the MES rollout. Define workflows, recipe controls, and equipment states.
- Integration & Data: Translate Test (handler/tester) and Plating (chemical/mechanical) requirements into digital designs. Define data collection needs for critical process parameters.
- Validation: Validate integration scenarios and support UAT and deployment. ...
Posted
7 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Represent Turret, Tape & Reel equipment engineering in the MES rollout. Define workflows, setup/recipe controls, and equipment states.
- Integration & Data: Translate Turret, Tape & Reel hardware requirements (e.g., vision-based inspection, winding/packaging mechanics) into digital designs. Define data collection needs.
- Validation: Validate integration scenarios and support UAT and deployment. ...
Posted
7 days ago
Undisclosed
KL City
- MES Implementation (Project Phase): Represent equipment engineering in the MES rollout. Define equipment-specific workflows, setup/recipe controls, qualification requirements, and equipment states.
- Integration & Data: Translate physical shop-floor requirements into digital process designs. Define data collection needs and equipment interlocks to ensure seamless hardware-to-software communication.
- Validation: Validate equipment integration scenarios and lead User Acceptance Testing (UAT) and deployment on the production floor. ...
Posted
7 days ago
Browse Location:
Browse "texas instruments" Job By:
Browse "texas instruments" Job By: