- Kuantan Pahang Malaysia
Kerja Sepenuh Masa, Plant Operator di W. R. Grace & Co. Pahang - Maukerja
Kongsi
Simpan
Lokasi Kerja
Penerangan Kerja
Tanggungjawab
Job Description
WR Grace, a leading manufacturer of specialty chemicals, is currently seeking experienced/Fresh Graduate Plant Operator for our team at Gebeng Kuantan, Malaysia Plant . This role will be responsible ensuring safe operations of Wet End and Dry End sections with compliance to Good Manufacturing Practice (GMP) & Hazard Analysis & Critical Control Point (HACCP) requirements in delivering the required product quality and quantity.
At the Kuantan site, all employees have a role in upholding environmental, health, and safety standards. Each team member is accountable for ensuring compliance with our EHS policies, including emergency preparedness and response, as outlined in both site-wide and local area documentation.
Responsibilities 1 of 2
- Operate and monitor all processes and equipment at Wet End and Dry End to ensure they are in good and safe condition.
- The operators will be assigned on a rotating basis, covering both wet and dry operations. The Shift Supervisor will arrange the rotation schedule.
- Ensure full compliance with regulatory requirements, EHS policies, and procedures always.
- Communicate closely with the Process Technician and the Shift Supervisor regarding any issues or non-conformances in day-to-day operations.
- Ensure all equipment under his care is checked and evaluated according to the log sheet.
- Collect and label all necessary product samples accordingly and deliver them to the QC Lab in a timely manner.
- Operate a forklift to transport all necessary materials required for the manufacturing line.
- Perform Lock Out Tag Out (LOTO) as and when required.
- Be certified as an Authorized Gas Tester and Entry Supervisor and perform necessary duties as required.
- Be certified in Confined Space Entry and work in confined space areas within the plant as required.
- Act as a member of the Emergency Response Team during emergencies.
- Maintain good housekeeping practices in accordance with 5S standards at all times.
- Perform other related duties as assigned by the superior, as necessary.
Specified Job Responsibilities at Wet End Section :
- Monitor and perform the Normality Test at the Tubline when it is in operation.
- Collect raw materials, raw water, and in-process process samples and send them to the QC Lab for analysis.
- Ensure the safe and effective transfer of hydrogel from K-Units to the respective hydrogel silo.
- Ensure safe unloading of raw materials such as sodium silicate, ammonium hydroxide, sulfuric acid, and water tankers into their respective tanks.
- Log sulfuric acid and silicate totalizer readings during each pass of the run-off process.
- Be responsible for the recycling and/ or draining of hydrogel from the base gel transfer system baghouse.
- Perform the cleaning of the K-Unit rotating rake after the base gel transfer is completed.
- Be responsible for performing LOTO on Wet End equipment after the completion of every batch - for mixing nozzle and cone cleaning job.
- Perform routine inspection and functional check of all emergency showers and eye wash stations.
Specified Job Responsibilities at Dry End Section - FEM :
- Monitor and ensure the safe operation of the fluid energy mills.
- Ensure the safe operation of air compressors, cooling towers, and their auxiliary equipment.
- Ensure the availability of all packaging materials, base gel, and additives before, and during the production campaign.
- Ensure the right packaging materials and labels are prepared and used as per the production plan.
- Ensure the information on the bag label and stenciling information are correctly prepared.
- Collect and deliver finished product samples at the required frequency to the QC lab for analysis.
- Ensure proper cleaning of Dry End system and unplug of caustic injection nozzle at mill body during product grade changeover.
- Responsible for arranging additional sampling from finished product pallet if there is any process upset (50% or 100%) based on needs.
Responsibilities 2 of 2
Specified Job Responsibilities at Dry End Section - ACM :
- Monitor and ensure safe operations of the air classifier mill operation and its auxiliaries’ equipment.
- Supervise and ensure Packers are fully comply with the job requirement.
- Ensure the availability of all packaging materials, base gel, and additives before, and during the production campaign.
- Ensure the correct packaging materials and labels are prepared and used as per the production plan.
- Ensure the plant system is flushed and cleaned before start of any production campaign.
- Perform inspection and cleaning of sweco screen and magnetic separator upon complete of a production campaign.
- Perform the feed rate verification for RV4040A, Citric Acid feeder and SMBS feeder based on the defined periodic schedule.
- Ensure the plant area is protected from any birds or pests.
- Perform bagout of Aerogel from Flash Dryer intermediate silo, S4180 as and when necessary.
- Monitor any abnormal condition at mill injector during Process Technician perform parameters adjustment to prevent blow back of material.
- Responsible for transferring rework products into respective FEM silo as and when required.
- Charging additives into feeder hopper and empty out of remaining additives after completing of production campaign.
- Monitor hydrogel feeding into ACM, clear lump at screw feeder screen and ensure no overflow of material at K-tron Feeder.
- Responsible for performing inspection and complete Dust Filter inspection checklist, feedback to the Shift Supervisor immediately if any abnormal condition is observed.
- Responsible to complete Powered Industrial Truck Safety Inspection checklist, Heat Seal and Pallet Press interlock checklist (every shift).
Required Qualifications
- Minimum qualification: a Certificate or Diploma, preferably in a Science or Engineering discipline, or at least 2 years of experience in chemical manufacturing. Fresh graduates are encouraged to apply.
- Basic understanding of English and proficiency in Bahasa Malaysia are required.
- Proficiency in Microsoft Word and Microsoft Excel is an added advantage.
- Able to work on 12 Hrs Rotating Shift.
Benefits
- Medical Benefits including Dental/Vision
- Guranteed 13 Months Pay
- Education Assistance
Peringatan Penting
Jangan pernah kongsikan maklumat bank atau kad kredit anda semasa memohon pekerjaan. Elakkan membuat sebarang pembayaran atau mengisi survey yang tidak berkaitan. Jika ada yang mencurigakan, sila laporkan iklan pekerjaan ini segera.
Lebih Lanjut
