Electrical And Electronics Engineering Jobs in Bayan Lepas - September 2026 - Urgent Hiring
search.result_querys_job
"electrical and electronics engineering"
text.in Bayan Lepas
MYR2,500 - MYR3,300 Per Month
- Conduct functional testing on electronic module samples, including measurement of parameters such as Output Motor (V), Cut-off Output Current (A), and Cut-off Timing (S)
- Perform AM2 measurements, including analysis of Energy Curves and Spike Curves
- Support flashing of software into electronic module devices ...
Be an early applicant!
Posted
a month ago
Chat Available
MYR2,500 - MYR3,300 Per Month
- Conduct functional testing on electronic module samples, including measurement of parameters such as Output Motor (V), Cut-off Output Current (A), and Cut-off Timing (S)
- Perform AM2 measurements, including analysis of Energy Curves and Spike Curves
- Support flashing of software into electronic module devices ...
Be an early applicant!
Posted
a month ago
MYR3,800 - MYR5,000 Per Month
- Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
- Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
- Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...
Be an early applicant!
Posted
3 days ago
MYR10,000 - MYR15,000 Per Month
- To lead a team of mechanical and electrical engineers in developing and maintaining process for the following zones: Surface Mount Technology (SMT), Electrical Testing (ET), Backend manual assembly and automated Processes, and Final Inspection.
- Responsible for driving process improvement initiatives, optimizing costs, ensuring technical excellence and supporting cross-site operations.
- Process Efficiency: Achieve defined cycle time, throughput, and yield improvements. ...
Be an early applicant!
Posted
3 days ago
MYR3,800 - MYR5,000 Per Month
- Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
- Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
- Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...
Be an early applicant!
Posted
a month ago
MYR10,000 - MYR15,000 Per Month
- To lead a team of mechanical and electrical engineers in developing and maintaining process for the following zones: Surface Mount Technology (SMT), Electrical Testing (ET), Backend manual assembly and automated Processes, and Final Inspection.
- Responsible for driving process improvement initiatives, optimizing costs, ensuring technical excellence and supporting cross-site operations.
- Process Efficiency: Achieve defined cycle time, throughput, and yield improvements. ...
Be an early applicant!
Posted
a month ago
Chat Available
MYR3,800 - MYR5,000 Per Month
- Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
- Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
- Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...
Be an early applicant!
Posted
a month ago
MYR6,000 - MYR7,500 Per Month
- Responsible for the assembly, integration, testing, troubleshooting, and improvement of automation machinery and equipment according to engineering drawings, work instructions, and quality standards.
- Assemble automation machines, modules, and mechanical sub-assemblies according to engineering drawings, BOMs, and work instructions.
- Perform mechanical fitting, alignment, adjustment, and integration of machine components. ...
Good electro-mechanical equipment troubleshooting skills.
Read and orally communicate in Mandarin (writing ability not required).
+3
Be an early applicant!
Posted
6 days ago
Chat Available
MYR6,000 - MYR7,500 Per Month
- Responsible for the assembly, integration, testing, troubleshooting, and improvement of automation machinery and equipment according to engineering drawings, work instructions, and quality standards.
- Assemble automation machines, modules, and mechanical sub-assemblies according to engineering drawings, BOMs, and work instructions.
- Perform mechanical fitting, alignment, adjustment, and integration of machine components. ...
Good electro-mechanical equipment troubleshooting skills.
Read and orally communicate in Mandarin (writing ability not required).
+3
Be an early applicant!
Posted
6 days ago
Chat Available
MYR4,000 - MYR6,000 Per Month
- Responsible for the assembly, integration, testing, troubleshooting, and improvement of automation machinery and equipment according to engineering drawings, work instructions, and quality standards.
- Assemble automation machines, modules, and mechanical sub-assemblies according to engineering drawings, BOMs, and work instructions.
- Perform mechanical fitting, alignment, adjustment, and integration of machine components. ...
Be an early applicant!
Posted
a day ago
Chat Available
Undisclosed
- Develop, formulate, evaluate and execute process development and process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation or experiments to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
18 hours ago
Chat Available
MYR10,000 - MYR15,000 Per Month
- To lead a team of mechanical and electrical engineers in developing and maintaining process for the following zones: Surface Mount Technology (SMT), Electrical Testing (ET), Backend manual assembly and automated Processes, and Final Inspection.
- Responsible for driving process improvement initiatives, optimizing costs, ensuring technical excellence and supporting cross-site operations.
- Process Efficiency: Achieve defined cycle time, throughput, and yield improvements. ...
Posted
a month ago
Chat Available
Undisclosed
- Carry-out daily shiftly routines job as implemented by mold team.
- Responsible for any line issue either equipment or tooling and optimizing trouble-shooting for reducing downtime and waiting time manner
- Prioritize standby support on areas designated by crew leader/superior. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Carry-out daily shiftly routines job as implemented by mold team.
- Responsible for any line issue either equipment or tooling and optimizing trouble-shooting for reducing downtime and waiting time manner
- Prioritize standby support on areas designated by crew leader/superior. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
13 days ago
Chat Available
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
13 days ago
Chat Available
Undisclosed
- Responsible for process ownership of CIS Smart Manufacturing – AMR machine and new system in assembly line.
- Establish and setup new AMR and system for assembly process capabilities and materials including hand-on equipment setup and prepare document and specification for AMR and new system control.
- Monitor performance and quality of AMR machine and system process. Identify problems, recommendation, and implementation of corrective and preventive actions. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Responsible for process ownership of CIS Smart Manufacturing – AMR machine and new system in assembly line.
- Establish and setup new AMR and system for assembly process capabilities and materials including hand-on equipment setup and prepare document and specification for AMR and new system control.
- Monitor performance and quality of AMR machine and system process. Identify problems, recommendation, and implementation of corrective and preventive actions. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Be an early applicant!
Posted
13 days ago
Chat Available
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Be an early applicant!
Posted
13 days ago
Undisclosed
- Responsible for process ownership of DA/GA machine in assembly line.
- Establish and setup new DA/GA assembly process capabilities and materials including hand-on equipment setup.
- Monitor performance, quality and reliability of die attach process. Identify problems, recommendation, and implementation of corrective and preventive actions. ...
Be an early applicant!
Posted
13 days ago
Chat Available
Undisclosed
- Responsible for process ownership of DA/GA machine in assembly line.
- Establish and setup new DA/GA assembly process capabilities and materials including hand-on equipment setup.
- Monitor performance, quality and reliability of die attach process. Identify problems, recommendation, and implementation of corrective and preventive actions. ...
Be an early applicant!
Posted
13 days ago