Engineering Analysis Jobs in Bayan Lepas - October 2026 - Urgent Hiring

Showing 26 jobs results for "engineering analysis" in Bayan Lepas
Never miss any updates for Engineering Analysis jobs in Bayan Lepas
MYR3,000 - MYR5,000 Per Month
  • Review project drawings, specifications and construction documents.
  • Monitor project progress, quality of work and compliance with approved drawings and specifications.
  • Prepare and maintain project documentation, reports, site records and progress updates. ...

Be an early applicant!

Posted
3 days ago
Undisclosed
  • Monitor day-to-day inspection operations on vendors supplied products.
  • To liaise with the incoming inspection team and buyer on supplier quality issues.
  • Supplier quality performance monitoring, evaluation & drive for improvement. ...

Be an early applicant!

Posted
20 days ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
  • Perform Failure Analysis & Fault Isolation (FAFI) to determine defect modes and root causes.
  • Conduct electrical failure analysis to identify component defects and support factory rejection cases.
  • Carry out validation and fault isolation using tools such as Parametric Analyzer, Keithley meter, iTDR, SEM/EDX, and IRLC. ...
Semiconductor Manufacturing Electrical & Engineering
+1

Be an early applicant!

Posted
a month ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
  • Assist in the daily production activities, ensuring smooth operations and adherence to production schedules and quality standards.
  • Support senior engineers in implementing and monitoring lean manufacturing principles and process improvement initiatives to enhance efficiency and reduce waste.
  • Participate in root cause analysis for production issues and contribute to the development and implementation of corrective actions. ...
problem-solving lean manufacturing
+8
Posted
13 days ago
MYR3,000 - MYR3,600 Per Month
  • Perform electrical validation and fault isolation on failed products.
  • Identify and analyze physical defects related to electrical failures.
  • Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Posted
2 months ago
Undisclosed
  • To perform FA on devices which are reported to be failing electrical test from Manufacturing/NPI or customer return.
  • To write quality FA report and provide conclusive findings that can help engineering team to root cause the issue.
  • To innovate FA approach or methodology to improve FA capability and cycle time at the lowest cost for the benefits of the organization. ...

Be an early applicant!

Posted
a month ago
MYR3,800 - MYR5,000 Per Month
  • Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
  • Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
  • Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...
Posted
2 months ago
MYR3,000 - MYR6,000 Per Month
  • Perform inspection and verification of incoming raw materials, components, and parts to ensure compliance with specifications and quality standards.
  • Work closely with suppliers to address incoming quality issues and drive continuous improvement.
  • Support supplier quality activities including supplier audits and corrective actions. ...
Posted
2 months ago
MYR3,000 - MYR4,000 Per Month
  • To operate complex equipment and analytical tools in ESD environment.
  • Operating and using Central Lab support, Package and Physical FA techniques; BKM to satisfy all FA need.
  • Taking up the responsibilities of equipment ownership, development and proliferation to users if identified. ...
Posted
2 months ago
Undisclosed
  • Responsible for process ownership of DA/GA machine in assembly line.
  • Establish and setup new DA/GA assembly process capabilities and materials including hand-on equipment setup.
  • Monitor performance, quality and reliability of die attach process. Identify problems, recommendation, and implementation of corrective and preventive actions. ...

Be an early applicant!

Posted
a month ago
Undisclosed
  • Responsible for process ownership of CIS Smart Manufacturing – AMR machine and new system in assembly line.
  • Establish and setup new AMR and system for assembly process capabilities and materials including hand-on equipment setup and prepare document and specification for AMR and new system control.
  • Monitor performance and quality of AMR machine and system process. Identify problems, recommendation, and implementation of corrective and preventive actions. ...
Posted
a month ago
MYR6,500 - MYR8,500 Per Month
  • Drive strategic sourcing initiatives to achieve cost savings, improve quality, and ensure supply continuity.
  • Lead supplier identification, qualification, audits, evaluations, and selection processes to assess supplier capabilities, quality systems, capacity, risk exposure, and business continuity readiness.
  • Support contract negotiations and commercial discussions with suppliers to achieve competitive and sustainable business terms. ...
Enterprise Resource Planning (ERP) MRP
+1
Posted
2 months ago
MYR6,500 - MYR8,500 Per Month
  • Drive strategic sourcing initiatives to achieve cost savings, improve quality, and ensure supply continuity.
  • Lead supplier identification, qualification, audits, evaluations, and selection processes to assess supplier capabilities, quality systems, capacity, risk exposure, and business continuity readiness.
  • Support contract negotiations and commercial discussions with suppliers to achieve competitive and sustainable business terms. ...
Enterprise Resource Planning (ERP) MRP
+1
Posted
2 months ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
  • Assist in the daily production activities, ensuring smooth operations and adherence to production schedules and quality standards.
  • Support senior engineers in implementing and monitoring lean manufacturing principles and process improvement initiatives to enhance efficiency and reduce waste.
  • Participate in root cause analysis for production issues and contribute to the development and implementation of corrective actions. ...
problem-solving lean manufacturing
+8
Posted
13 days ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
  • Assist in the daily production activities, ensuring smooth operations and adherence to production schedules and quality standards.
  • Support senior engineers in implementing and monitoring lean manufacturing principles and process improvement initiatives to enhance efficiency and reduce waste.
  • Participate in root cause analysis for production issues and contribute to the development and implementation of corrective actions. ...
problem-solving lean manufacturing
+8
Posted
13 days ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
  • Assist in the daily production activities, ensuring smooth operations and adherence to production schedules and quality standards.
  • Support senior engineers in implementing and monitoring lean manufacturing principles and process improvement initiatives to enhance efficiency and reduce waste.
  • Participate in root cause analysis for production issues and contribute to the development and implementation of corrective actions. ...
problem-solving lean manufacturing
+8
Posted
13 days ago
MYR3,000 - MYR4,000 Per Month
  • To operate complex equipment and analytical tools in ESD environment.
  • Operating and using Central Lab support, Package and Physical FA techniques; BKM to satisfy all FA need.
  • Taking up the responsibilities of equipment ownership, development and proliferation to users if identified. ...
Posted
2 months ago
MYR3,000 - MYR3,600 Per Month
  • Perform electrical validation and fault isolation on failed products.
  • Identify and analyze physical defects related to electrical failures.
  • Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Posted
2 months ago
MYR3,000 - MYR3,600 Per Month
  • Perform electrical validation and fault isolation on failed products.
  • Identify and analyze physical defects related to electrical failures.
  • Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...
Posted
2 months ago
  • Conduct and supervise Failure Analysis (FA) activities for Production and New Product Introduction (NPI) samples, including trend analysis, reporting, and defect characterization.
  • Manage and mentor a team of technicians for media FA analysis and defect characterization using first level FA equipment.
  • Coordinate second-level analysis with analytical lab teams. ...
Posted
4 days ago
  • Conduct electrical and physical failure analysis, covering up to 1st die level analysis.
  • Familiar with failure analysis tools and techniques such as SEM, EDX, curve trace, thermal hotspot analysis, X-ray, bench test, laser & chemical decapsulation, mechanical cross-section, die-level delayering and microprobing.
  • Prepare detailed technical report documenting analysis methods, findings, conclusions, and recommendations. ...
Posted
11 days ago
  • Completion of a diploma in Engineering or related field from a recognized institution.
  • Working experience:1-3years, fresh graduates are encouraged to applyPREFERRED
  • Able to manage routine laboratory analysis and urgent/ad-hoc failure cases with minimal supervision, ensuring timely completion of investigations and reports. ...
Posted
20 days ago
  • Conduct and supervise Failure Analysis (FA) activities for Production and New Product Introduction (NPI) samples, including trend analysis, reporting, and defect characterization.
  • Manage and mentor a team of technicians for media FA analysis and defect characterization using first level FA equipment.
  • Coordinate second-level analysis with analytical lab teams. ...
Posted
24 days ago
  • Minimum qualification is a Diploma in Electronics/Microelectronics.
  • The candidate should have Failure Analysis experience in Package or Die level FA or Reliability analysis experience for a minimum of 1 year and above in semiconductor manufacturing related company.
  • Well versed in using FA & Rel related equipment such as Microscope, Parametric Analyzer, X-ray, CSAM, SEM-EDX, Decapper, TDR, Micro Prober station, FTIR, HAST, Bake oven, Reflow machine, TC chamber, Burn in oven and etc. ...
Posted
3 days ago
  • Responsible for Physical Design tasks at block or subsystem level. The tasks will include Floorplanning, Synthesis, Placement, CTS, Routing, Static Timing, Physical Verification, Formal Equivalency, Power Efficiency, IR-Drop, and EM.
  • Owning the entire process from SYN to PNR using Synopsys Fusion Compiler. Crafted the convergence recipe & design collateral to meet project requirement.
  • Run signoff flow including PV, extraction, STA, VCLP, FEV and EMIR, analyse the violation and converge the design. ...
Posted
4 days ago
  • Responsible for Physical Design tasks at block or subsystem level. The tasks will include Floorplanning, Synthesis, Placement, CTS, Routing, Static Timing, Physical Verification, Formal Equivalency, Power Efficiency, IR-Drop, and EM.
  • Owning the entire process from SYN to PNR using Synopsys Fusion Compiler. Crafted the convergence recipe & design collateral to meet project requirement.
  • Run signoff flow including PV, extraction, STA, VCLP, FEV and EMIR, analyse the violation and converge the design. ...
Posted
a month ago