Develops services and calibrates test equipment by making regular performance inspections, planning preventative maintenance and repairing defective equipment or systems.
Performs repairs and preventative actions on equipment within the production.
Service Engineer is responsible for providing the company's after-sales technical and services supports. Provide technical advices, recommend scheduled overhauls, life cycle parts replacement. Assist in product roll-out and start-up, maintain current equipment and resolve faults as required. Ensure 24x7 standby services through a rotational duty schedule. May provide supports in a pre-sale through post-sale capacity. Product include but not limtied to transformer, medium voltage switchgear, Ring-Main-Unit (RMU), Air-Circuit-Breaker (ACB)
Responsible for technical and administrative support activities including installation, testing, commissioning, repair, modifications, preventative maintenance, troubleshooting, engineering change upgrades, etc
Ensures adequate records and systems are maintained. Maintains communication with design management and specialists in resolving technical problems and/or bringing problems to the design department’s attention
...
Service Engineer is responsible for providing the company's after-sales technical and services supports. Provide technical advices, recommend scheduled overhauls, life cycle parts replacement. Assist in product roll-out and start-up, maintain current equipment and resolve faults as required. Ensure 24x7 standby services through a rotational duty schedule. May provide supports in a pre-sale through post-sale capacity. Product include but not limtied to transformer, medium voltage switchgear, Ring-Main-Unit (RMU), Air-Circuit-Breaker (ACB)
Responsible for technical and administrative support activities including installation, testing, commissioning, repair, modifications, preventative maintenance, troubleshooting, engineering change upgrades, etc
Ensures adequate records and systems are maintained. Maintains communication with design management and specialists in resolving technical problems and/or bringing problems to the design department’s attention
...
Maintain a cGMP compliant environment and operate within FDA guidelines for 21CFR820 manufacturing.
Follow all policies and procedures including safety and quality standards.
Perform equipment setup, operation, repair, and weekly preventative maintenance tasks to meet all standards for safety, quality, and efficiency. These tasks must be completed under minimal supervision.
...
Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.
Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.
...
Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.
Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.
...
Perform daily operations and maintenance in data center for facilities and utilities, including monitor and record readings of equipment in Data Center such as UPS, temperature, CRAC unit, humidity.
Perform daily monitoring to customer equipment, uplinks and sites using monitoring tools. In the event of an incident, attend to ad-hoc support and emergency cases in Data Center to ensure minimum downtime.
To ensure standard operating procedures (SOP) are followed and conformed by each party for any work in the Data Center. Which is to accompany, and welcome visitors / vendors access into the Data Center.
...
Grow market share for Emerson FLMC Motion Control solutions by developing and strengthening relationships with existing direct key accounts.
Identify, acquire, and develop new key accounts within the assigned territory, with a strong focus on OEMs and System Integrators.
Analyze customer strategic objectives and applications to provide technical consultation, identify opportunities, and propose effective, customer‑specific solutions.
...
The Project Executive is responsible for the part of the workplace management team that directly manages short- and long-term projects. Project Executives are typically responsible for developing strategic program and project goals and monitoring program and project performance.
Prepare all resources for all projects and provide required reports for same and plan all projects according to required timeframe and in compliance with project policy documents and monitor all staff and client’s performance for all clients.
Coordinate with clients, owners and subcontractors to ensure optimal level of client satisfaction and administer everyday operation for projects.
...
The Project Executive is responsible for the part of the workplace management team that directly manages short- and long-term projects. Project Executives are typically responsible for developing strategic program and project goals and monitoring program and project performance.
Prepare all resources for all projects and provide required reports for same and plan all projects according to required timeframe and in compliance with project policy documents and monitor all staff and client’s performance for all clients.
Coordinate with clients, owners and subcontractors to ensure optimal level of client satisfaction and administer everyday operation for projects.
...
Carry out modification works such as wiring/electrical works, rewiring, installation of lights, circuits, and electrical socket supplies for household equipment, and troubleshooting wiring issues.
Perform air conditioning maintenance and servicing, including troubleshooting and minor repairs.
Knowledge of smart meter installation is an added advantage.
...
End-to-End Development: Lead the design and implementation of robust, scalable software applications with Flutter/React and complementary technologies.
AI-Enhanced Features: Integrate AI-driven components—such as smart search, chatbots, product recommendations, and predictive UI elements—into modern retail solutions.
System Integration: Work closely with AI, backend, and DevOps teams to connect applications with APIs, cloud services (especially Azure), and analytics pipelines.
...