For Employers - Post Jobs
Contact Us
Jobs
Companies
Forums
1,700+ Jurutera Mekanikal Jobs in Malaysia | Job Vacancies | September 2026 | Maukerja
Paparan 1,775 hasil carian kerja kosong untuk
"jurutera mekanikal"
Jangan lepaskan peluang untuk kerja Jurutera Mekanikal terkini!
Urus Pemberitahuan
SGD3,200 - SGD3,200 Sebulan
Singapore
- Lead mechanical and electro-mechanical assembly process engineering for RF modules, wire harnesses, and sub-assemblies
- Develop and document assembly work instructions, jigs, and fixtures to ensure repeatable build quality
- Support New Product Introduction (NPI) builds, pilot runs, and transition to volume production ...
Posted
8 days ago
Undisclosed
Singapore
- To generate mechanical and system designs that are required for the projects
- To ensure modification designs are compliant with requirements from relevant aviation authorities
- To perform simple analysis to substantiate designs ...
Posted
a month ago
SGD3,000 - SGD3,000 Sebulan
Singapore
- Industry/ Organization Type: Manufacturing/Semi-conductor
- Position Title: Field Service Engineer (Electronics/Electrical/Microelectronics)
- Working Location: Depending on allocated project ...
Posted
9 days ago
SGD3,500 - SGD3,500 Sebulan
Singapore
- Industry/ Organization Type: Manufacturing & Repair
- Position Title: Technical Sales Engineer (Mechanical / Hydraulics)
- Working Location: Yishun Industrial Park A (5 mins walking from Canberra Station) ...
Posted
9 days ago
SGD3,000 - SGD3,000 Sebulan
Singapore
- Industry/ Organization Type: Design & Built/ Gas System
- Position Title: QA Engineer
- Working Location: Tampines (Site-based) ...
Posted
9 days ago
SGD5,000 - SGD8,000 Sebulan
Singapore
- Mechanical Engineer Responsibilities:
- Designing, manufacturing, and installing components that fulfill requirements.
- Analyzing problems or deficiencies and developing solutions to resolve them. ...
Posted
a month ago
Undisclosed
- Develop and implement equipment inspection and preventive maintenance plans, manage and supervise maintenance technicians, and standardize equipment operating and maintenance procedures for production operators
- Troubleshoot issues such as die hole blockage, unstable pellet density, and high defective-product rates
- Continuously optimize the production-line process flow and equipment coordination, including shredding, dewatering, drying, material discharge uniformity, and pelletizing, with the objective of increasing production capacity and reducing equipment downtime and failure rates ...
Posted
10 days ago
SGD4,000 - SGD4,000 Sebulan
Singapore
- Drive the design of next-generation semiconductor automation equipment and modules, transforming ideas into functional designs and prototypes.
- Create detailed fabrication, assembly, and layout drawings using 3D CAD tools, such as CREO, SolidWorks, or other acceptable software.
- Perform structural, kinematic, and dynamic analyses, including Finite Element Analysis (FEA) simulations and tolerance stack-ups, to ensure design robustness. ...
Posted
17 days ago
SGD4,500 - SGD4,500 Sebulan
Singapore
- Product Evolution & New Design: Lead mechanical design efforts for the enhancement of our existing robotic system, as well as the conceptualization and development of new products and applications.
- End-to-End Development: Drive the full R&D lifecycle: brainstorming, proof-of-concept prototyping, detailed 3D modelling, engineering drawings, verification testing, and production release.
- Advanced Mechanisms & Kinematics: Design complex moving parts, linkages, and structural components, ensuring precise kinematics and structural integrity required for medical-grade robotics. ...
Posted
17 days ago
The Polyolefin Company (Singapore) Pte Ltd
Undisclosed
Singapore
- Lead a team of mechanical supervisors and contractors in performing all the plant maintenance, modification, and construction activities to ensure work are carried timely, safely and with good maintenance practices with no disruption to plant operations.
- Coordinate with plant operators and other maintenance groups in the execution of plant maintenance and modifications works with no compromise to safety of workers and integrity of facilities.
- Carry out mechanical study and modification of plant facilities according to technical specification and business requirements. ...
Posted
a month ago
SGD3,200 - SGD3,800 Sebulan
Singapore
- Create and maintain parametric 3D parts, sheet-metal components, and assemblies using Autodesk Inventor.
- Develop product models from engineering specifications, drawings, physical samples, and manufacturing requirements.
- Create and maintain configurable product models using Autodesk Inventor iLogic. ...
Posted
a month ago
MYR3,000 - MYR4,000 Sebulan
- Degree in Mechanical / Electrical / Mechatronics Engineering or related field.
- Fresh graduates
- Support daily engineering and production activities. ...
Posted
11 days ago
Undisclosed
Singapore
- Assisting Executive Engineer/Manager to conduct testing and evaluations on Building and Industrial products to ensure compliance to international standards
- Set-up test fixtures for customized test procedures
- Prepare simple standard test reports. ...
Posted
11 days ago
SGD3,000 - SGD4,500 Sebulan
Singapore
- Review andinterpret M&E drawings, specifications, and design documentation
- Coordinate M&Edesign with structural, architectural, and civil engineering teams
- Identify designclashes and discrepancies; propose practical solutions and value engineeringoptions ...
Posted
a month ago
SGD4,000 - SGD5,000 Sebulan
Yishun
- Design and develop precision stages, gantries, actuator modules, and motion system components from conceptual design through detailed engineering drawings using SolidWorks.
- Prepare, review, and maintain mechanical drawings, Bills of Materials (BOMs), technical specifications, and engineering documentation.
- Release official BOMs and manufacturing drawings for costing, procurement, and production purposes. ...
Posted
a month ago
SGD4,500 - SGD6,000 Sebulan
Serangoon
- Job Description:
- Review of machinery and equipment specification, meeting technical specification. Interpretation of classification rules to address to review comment.
- Familiar with equipment specification and their installation requirement such as main engines, generators, propulsion, gearbox, hydraulic operated equipment, HVAC, refrigeration and others. ...
Posted
a month ago
Undisclosed
Jurong West
- Able to perform corrective Mechanical Maintenance for all mechanical equipment located in Sembgas & Service corridor for the plants.
- Carry out inspections as per daily maintenance schedule; attend defects, breakdowns, including the repairing and calibration of Mechanical Equipment.
- Hands on experience of valves, piping, safety valves, control & shutoff valves etc. ...
Posted
11 days ago
SGD3,000 - SGD5,000 Sebulan
Singapore
- Prepare the equipment list
- Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries
- Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries ...
Posted
a month ago
SGD4,000 - SGD4,800 Sebulan
Singapore
- Oversee and manage all M&E works on site (HVAC, electrical, plumbing, fire protection, etc.)
- Review M&E drawings, specifications, main contractors and subcontractors
- Coordinate with consultants, main contractors and subcontractors ...
Posted
a month ago
SGD4,000 - SGD4,600 Sebulan
Ang Mo Kio
- Coordinate company projects and assigned works to ensure timely and efficient execution
- Verify that construction work complies with drawings, specifications, and management instructions
- Plan and anticipate site issues to maintain smooth progress and adhere to construction schedules ...
Posted
a month ago
SGD2,800 - SGD3,500 Sebulan
Woodlands
- Work closely with the Sales team to provide various mechanical designs to secure customers’ orders.
- Support Sales for on-site project requirements
- Local and overseas project order processing ...
Posted
a month ago
SGD3,000 - SGD5,000 Sebulan
Woodlands
- Plan, schedule, and oversee day-to-day execution of assigned projects
- Read and interpret architectural, structural, and M&E drawings
- Liaise with clients, consultants, subcontractors, and relevant authorities ...
Posted
a month ago
SGD3,000 - SGD5,000 Sebulan
Singapore
- Prepare the equipment list.
- Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries.
- Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries. ...
Posted
a month ago
SGD7,000 - SGD7,200 Sebulan
Singapore
- Assist Chief Resident Engineer, Qualified Person (Supervision), and Lead Resident Engineer in daily supervision and coordination duties
- Enforce specifications, national regulations, local Authorities’ requirements, Singapore Standards and good practices
- Attend site meetings and resolve technical issues with Contractors. ...
Posted
a month ago
SGD3,200 - SGD3,200 Sebulan
Singapore
- Industry/ Organization Type: Heavy Equipment
- Position Title: Mechanical Design Engineer
- Working Location: Tuas ...
Posted
22 days ago
Singapore Institute Of Technology
Undisclosed
Singapore
- Design, develop, and integrate customised mechanical mechanisms for robotic systems, including robotic end-effectors, grippers, tool-changing interfaces, material handling systems, and task-specific automation modules.
- Develop 3D CAD models, fabrication drawings, Bills of Materials (BOMs), and technical documentation using SolidWorks.
- Perform mechanical design analysis and engineering calculations, including load estimation, actuator sizing, structural integrity, tolerance analysis, and vibration/shock mitigation. ...
Posted
18 days ago
Zhongshi Chemical Engineering Construction
Undisclosed
- Develop, implement, and review Project Quality Plans (PQP), Inspection & Test Plans (ITPs), method statements, and inspection checklists for Mechanical & Electrical (M&E) works in accordance with project specifications and client requirements.
- Conduct inspections and ensure all M&E installations comply with approved drawings, technical specifications, applicable codes, and industry standards.
- Manage Non-Conformance Reports (NCRs), corrective and preventive actions (CAPA), and ensure timely resolution of quality issues. ...
Posted
18 days ago
Undisclosed
- PETROS is seeking an experienced Mechanical Static & Piping expert to join our team in Malaysia. The role covers the full project lifecycle, including the design, integrity, and reliability of pressure vessels, storage tanks, heat exchangers and piping systems to meet technical and regulatory standards.
- The candidate will provide technical assurance, drive engineering excellence, and mentor engineers within the discipline, supporting PETROS’ in-house capability development and cross-functional
Posted
18 days ago
BESCON ENGINEERING SERVICES PTE. LTD.
SGD3,000 - SGD3,000 Sebulan
Singapore
- Schematic / concept and detailed design.
- Preparation of tender drawing/specifications & cost estimates.
- Attend project meetings, site meetings & site inspections. ...
Posted
18 days ago
SGD3,500 - SGD5,500 Sebulan
Choa Chu Kang
- Job Description
- Manage the execution of engineering projects from inception to completion, overseeing all technical and commercial aspects
- Liaise with clients, subcontractors and other stakeholders to ensure timely delivery and smooth project coordination ...
Posted
a month ago
Cari Lokasi:
Papar Lebih Lokasi
Cari Syarikat:
Papar Lebih Syarikat
Cari Kerja "jurutera mekanikal" Berdasarkan:
Cari Kerja "jurutera mekanikal" Berdasarkan: