2,900+ Manufacturing Engineer Jobs in Malaysia | Job Vacancies | July 2026 | Maukerja
Showing 2,916 jobs results for
"manufacturing engineer"
Manufacturing Engineer (CNC Machining)
MYR4,000 - MYR7,000 Per Month
Sungai Seluang, Kedah
- Responsible for selecting and maintaining best material combinations to maximize quality and optimize manufacturing cost and efficiency.
- Analyze data and use all available resources to maintain product performance and meet quality objectives.
- Recommends manufacturing line equipment and fixtures based performing product process flow and time standards analysis studies ...
Posted
15 hours ago
MYR4,000 - MYR5,500 Per Month
- Demonstrate technical expertise on process and product technologies to support design, optimization, validation, and troubleshooting.
- Monitor equipment and process performance, conducting root cause analysis for non-conformances, low yields, and other quality or production issues.
- Communicate effectively and collaborate with peers, operations management, and supporting divisions including Production, Sustaining Engineering, and Quality. ...
Posted
13 days ago
Chat Available
MYR2,000 - MYR3,500 Per Month
+Additional Compensation
Solok Rishah 3, 30100
- Oversee daily production operations to ensure efficiency and quality.
- Develop production plans and schedules to meet demand.
- Monitor production processes, identify bottlenecks, and implement solutions for improvement. ...
Be an early applicant!
Posted
3 days ago
Chat Available
Undisclosed
- Assessing project feasibility through product drawing and B.O.M review. (including built cycle time, avaibility of tools & equipment, non-recurring engineering (NRE) cost etc.)
- Set up the bill of materials (B.O.M) for the request for quotation (RFQ) stage in the Agile system.
- Establishing System Bill of Materials (B.O.M) ...
Be an early applicant!
Posted
3 days ago
MYR2,000 - MYR3,500 Per Month
Fresh Graduates
- Support preventive maintenance, calibration, and corrective maintenance (troubleshooting and repair) for various automated and manual machinery, including equipment, tooling, fixtures, and ESD devices.
- Assist in machine and assembly workstation setup, production utilities support, safety compliance, and 5S implementation.
- Coordinate vendor activities, including service support, spare parts sourcing, and procurement. ...
Be an early applicant!
Posted
3 days ago
MYR3,500 - MYR4,000 Per Month
Fresh Graduates
- Key Responsibilities:• Support process and product technology optimization, validation, and troubleshooting• Assist in the selection, design, development, and implementation of manufacturing equipment, tooling, and materials• Execute testing and experimentation activities, analyze results, and recommend improvements• Support the introduction of new processes, equipment, and materials, including installation, calibration, and documentation• Participate in process validation activities, including PFMEA, validation plans, protocols, and reports• Apply Lean Manufacturing and continuous improvement methodologies to enhance efficiency and reduce waste• Ensure compliance with quality system and regulatory requirements• Collaborate closely with cross-functional teams, vendors, and technical stakeholdersAdditional Responsibilities (Calibration Engineering Role):• Perform and support equipment calibration activities• Maintain measurement traceability to recognized calibration standards• Support internal and external audits• Develop calibration procedures and technical reports• Assist calibration technicians and support laboratory operations• Drive standard work practices and quality compliance across calibration activitiesJoin a dynamic manufacturing environment where you'll have opportunities to develop your technical expertise, contribute to continuous improvement initiatives, and work alongside experienced engineering professionals.Interested candidates, please WhatsApp your resume to 012-274 1997.
Posted
a month ago
MYR2,000 - MYR2,200 Per Month
Fresh Graduates
- Process Technician
- Responsible for performing multiple job duties within a manufacturing environment, including tools/ equipment/ machine/ robotics calibration, preventive maintenance, ESD measurement etc.
- Support production line 5S, ESD & Lean improvement activities. ...
Posted
a month ago
Chat Available
MYR2,000 - MYR3,500 Per Month
+Additional Compensation
Solok Rishah 3, 30100
- Oversee daily production operations to ensure efficiency and quality.
- Develop production plans and schedules to meet demand.
- Monitor production processes, identify bottlenecks, and implement solutions for improvement. ...
Be an early applicant!
Posted
3 days ago
Chat Available
IT Engineer (Manufacturing)
MYR6,000 - MYR8,500 Per Month
- Maintain and troubleshoot all oAice and factory hardware (PCs, servers, switches, industrial terminals, and production data collectors) to ensure stable operations.
- Handle the full IT asset lifecycle – procurement, inspection, record-keeping, stocktake, and disposal – while managing costs and consumables.
- Set up and maintain network systems, server rooms, cabling, and workshop data transmission devices. ...
Posted
13 hours ago
MYR4,000 - MYR9,000 Per Month
Near Train Station
- Manufacturing industry/Public listed FirmWorking location : Sungai Chua, Kajang5 Working Days / WeekSalary commensurate with experience (RM5000 - RM9000)Job Responsibilities :1. Implement and improve software for the DCS system with debugging configuration.2. Ensure intelligent device such as server and scanner are running in a proper way without any delay.3. Prepare technical specification for procurement and liaison with purchasing department for material substitution.4. Assist the Senior Electrical Engineering Manager on the relevant administrative duties which have been delegated to him.5. Liaise with the Production, Workshop and Facilities Department on any improvement in pneumatic and hydraulic system.6. Maintain communication with major suppliers to exchange information on the latest technology.7. Participate in the total quality management system of the company for his department for long term continuous improvements and sustainable team morale.
Posted
16 days ago
MYR3,000 - MYR6,000 Per Month
Fresh Graduates
- Providing engineering and technical support for heavy lifting and transport projects
- Preparing method statements, lifting plans, and technical documentation
- Coordinating with project managers, supervisors, and site teams to ensure project requirements are met ...
Posted
2 days ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform test related tasks for unit under test via Test platform provided by Company,
- Trouble shoot test unit, perform debugging for minor Test failure unit.
- Perform Test cycle with correct sequent as per PMS Work Instruction. ...
Be an early applicant!
Posted
2 days ago
MYR2,000 - MYR3,500 Per Month
Fresh Graduates
- Support preventive maintenance, calibration, and corrective maintenance (troubleshooting and repair) for various automated and manual machinery, including equipment, tooling, fixtures, and ESD devices.
- Assist in machine and assembly workstation setup, production utilities support, safety compliance, and 5S implementation.
- Coordinate vendor activities, including service support, spare parts sourcing, and procurement. ...
Be an early applicant!
Posted
2 days ago
Chat Available
MYR1,700 - MYR2,500 Per Month
Padang China, Kedah
- Operate and maintain the Industrial Effluent Treatment System (IETS) to ensure compliance with all environmental regulations and discharge standards.
- Monitor wastewater quality parameters through regular sampling and analysis, identifying any deviations and implementing corrective actions.
- Perform routine inspections and preventative maintenance on all IETS equipment, including pumps, filters, clarifiers, and chemical dosing systems. ...
Be an early applicant!
Posted
2 days ago
MYR2,500 - MYR3,500 Per Month
Fresh Graduates
- Machinery & Equipment: Supports multi-discipline manufacturing processes of the repair, maintenance, installation, and/or enhancement of a select group of machinery and equipment or interrelated systems.
- Process/Product/Production: Provides technical support in chemical, electronic or mechanical operations, tests, experiments, and/or problem resolution associated with components, parts, products, or processes/systems.
- Fabrication: Responsible for performing various technical support and/ or production duties concerning wafer fabrication or related devices/ equipment, processes, and handling systems. ...
Be an early applicant!
Posted
6 days ago
Manufacturing Specialist
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
47500 Subang Jaya, Subang Jaya
Near Train Station
- Perform assembly, testing, finishing, and production activities.
- Operate and maintain production equipment while ensuring product quality and compliance with work instructions.
- Perform preventive maintenance and basic troubleshooting on machinery and tools. ...
Posted
4 days ago
Chat Available
Undisclosed
- Responsible for the daily operation and maintenance of the MES systemsystem abnormality problem solving, authority management, troubleshooting, etc.)
- Collect business department needs and organize system business processes, analysis, design feasible solutions, and cooperate with business departments to improve the construction of MES systems
- Responsible for functional testing, user training, problem collection and feedback ...
Be an early applicant!
Posted
3 days ago
MYR3,000 - MYR5,500 Per Month
- Operate and set up CNC machines, lathe machines, and other machining equipment.
- Read and interpret technical drawings, blueprints, and specifications.
- Perform machining, cutting, drilling, milling, and fabrication work according to requirements. ...
Posted
4 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Responsible for reliability testing support with loading and unloading of integrated circuit devices onto biased boards and chambers activities. Ensure to meet cycle time and zero quality issue.
- Support electrical testing and data-logging of integrated circuit devices using automated test equipment.
- Bench testing and debugging of reliability test circuits / boards verification. ...
Be an early applicant!
Posted
a month ago
Chat Available
Undisclosed
- To supervise and lead daily overall engineering department activities.
- To report all engineering related KPI(s) and other management assigned KPI(s) (a) weekly (b) monthly, to departmental HOD and corporate.
- To support Manufacturing Engineers to prepare documentation. ...
Be an early applicant!
Posted
3 days ago
Undisclosed
Bandar Kuala Lumpur, WP Kuala Lumpur
Near Train Station
- Support the Operations Manager in managing overall maintenance and integrity activities for upstream production facilities.
- Develop and implement preventive maintenance (PM), predictive maintenance (PdM), and corrective maintenance strategies.
- Ensure compliance with asset integrity management systems, HSE standards, and regulatory requirements. ...
Strong knowledge of Asset Integrity Management Systems (AIMS)
preventive and predictive maintenance
+2
Be an early applicant!
Posted
8 days ago
Chat Available
MYR3,500 - MYR5,000 Per Month
Near Train Station
- Technical and product training
- Mentorship from experienced engineers and specialists
- Hands-on customer projects and real-world problem solving ...
Posted
3 days ago
Electrical Engineer Solar Farm
Undisclosed
Fresh Graduates
- Electrical Engineers design, implement, maintain, and improve electrical instruments, equipment, facilities, and components for PV systems; and teach photovoltaic theory and practice to engineers, technicians, and installers.
Posted
14 hours ago
Chat Available
Up to MYR7,000 Per Month
- Responsibilities
- · Design complete mechanical and electro-mechanical assemblies and subsystems for standard applications
- · Apply geometric dimensioning and tolerancing principles ...
Be an early applicant!
Posted
3 days ago
MYR8,000 - MYR10,000 Per Month
- Lead the development of system architecture for automation equipment and production line solutions.
- Convert customer requirements, URS, process needs, and technical specifications into practical system-level designs.
- Define equipment functions, process flow, machine layout, module interfaces, control logic, data flow, and integration requirements. ...
Be an early applicant!
Posted
2 days ago
Chat Available
TECHNICIAN – PLANT OPERATOR
MYR1,800 - MYR2,500 Per Month
- Perform day-to-day plant operations, including equipment maintenance, service, and calibration
- Coordinate maintenance schedule of plant equipment
- Data logging on equipment operation and chemicals/consumables consumption ...
Posted
3 days ago
MYR5,500 - MYR8,500 Per Month
- Develop, maintain, and optimize production testing processes and equipment.
- Set up, troubleshoot, debug, and maintain Automated Test Equipment (ATE) and test systems.
- Support New Product Introduction (NPI), engineering builds, and production transfers. ...
Posted
11 days ago
MYR5,500 - MYR8,500 Per Month
- Monitor and improve product quality throughout the manufacturing process.
- Investigate quality issues, perform root cause analysis, and implement corrective and preventive actions (CAPA).
- Work closely with Production, Engineering, and other departments to resolve quality-related concerns. ...
Posted
11 days ago
MYR5,000 - MYR12,000 Per Month
- Oversee deployment and maintenance of genset fleet nationwide
- Coordinate chargeman team scheduling and emergency response
- Manage diesel procurement and consumption reporting ...
Posted
14 hours ago
Chat Available
Equipment Engineer (Mandarin Speaker)
MYR3,000 - MYR5,000 Per Month
- Responsible for installation, setup and commissioning of production equipment.
- Perform preventive maintenance (PM) and corrective maintenance.
- Troubleshoot electrical, mechanical and automation issues. ...
Posted
3 days ago