2,900+ Manufacturing Engineer Jobs in Malaysia | Job Vacancies | July 2026 | Maukerja
Showing 2,991 jobs results for
"manufacturing engineer"
MYR4,000 - MYR5,500 Per Month
- Demonstrate technical expertise on process and product technologies to support design, optimization, validation, and troubleshooting.
- Monitor equipment and process performance, conducting root cause analysis for non-conformances, low yields, and other quality or production issues.
- Communicate effectively and collaborate with peers, operations management, and supporting divisions including Production, Sustaining Engineering, and Quality. ...
Posted
8 days ago
MYR3,500 - MYR4,500 Per Month
Fresh Graduates
Bandar Kuala Lumpur, WP Kuala Lumpur
Near Train Station
- Develop and implement manufacturing processes to optimize efficiency, reduce waste, and improve product quality in a biotech/pharmaceutical setting.
- Utilize Lean Manufacturing principles and methodologies to drive continuous improvement initiatives and enhance production workflows.
- Perform root cause analysis on manufacturing deviations and implement corrective and preventive actions (CAPA) to ensure product integrity and compliance. ...
Posted
a month ago
MYR3,500 - MYR4,000 Per Month
Fresh Graduates
- Key Responsibilities:• Support process and product technology optimization, validation, and troubleshooting• Assist in the selection, design, development, and implementation of manufacturing equipment, tooling, and materials• Execute testing and experimentation activities, analyze results, and recommend improvements• Support the introduction of new processes, equipment, and materials, including installation, calibration, and documentation• Participate in process validation activities, including PFMEA, validation plans, protocols, and reports• Apply Lean Manufacturing and continuous improvement methodologies to enhance efficiency and reduce waste• Ensure compliance with quality system and regulatory requirements• Collaborate closely with cross-functional teams, vendors, and technical stakeholdersAdditional Responsibilities (Calibration Engineering Role):• Perform and support equipment calibration activities• Maintain measurement traceability to recognized calibration standards• Support internal and external audits• Develop calibration procedures and technical reports• Assist calibration technicians and support laboratory operations• Drive standard work practices and quality compliance across calibration activitiesJoin a dynamic manufacturing environment where you'll have opportunities to develop your technical expertise, contribute to continuous improvement initiatives, and work alongside experienced engineering professionals.Interested candidates, please WhatsApp your resume to 012-274 1997.
Posted
21 days ago
MYR2,000 - MYR2,200 Per Month
Fresh Graduates
- Process Technician
- Responsible for performing multiple job duties within a manufacturing environment, including tools/ equipment/ machine/ robotics calibration, preventive maintenance, ESD measurement etc.
- Support production line 5S, ESD & Lean improvement activities. ...
Posted
a month ago
Chat Available
IT Engineer (Manufacturing)
MYR6,000 - MYR8,500 Per Month
- Maintain and troubleshoot all oAice and factory hardware (PCs, servers, switches, industrial terminals, and production data collectors) to ensure stable operations.
- Handle the full IT asset lifecycle – procurement, inspection, record-keeping, stocktake, and disposal – while managing costs and consumables.
- Set up and maintain network systems, server rooms, cabling, and workshop data transmission devices. ...
Posted
7 hours ago
MYR4,000 - MYR9,000 Per Month
Near Train Station
- Manufacturing industry/Public listed FirmWorking location : Sungai Chua, Kajang5 Working Days / WeekSalary commensurate with experience (RM5000 - RM9000)Job Responsibilities :1. Implement and improve software for the DCS system with debugging configuration.2. Ensure intelligent device such as server and scanner are running in a proper way without any delay.3. Prepare technical specification for procurement and liaison with purchasing department for material substitution.4. Assist the Senior Electrical Engineering Manager on the relevant administrative duties which have been delegated to him.5. Liaise with the Production, Workshop and Facilities Department on any improvement in pneumatic and hydraulic system.6. Maintain communication with major suppliers to exchange information on the latest technology.7. Participate in the total quality management system of the company for his department for long term continuous improvements and sustainable team morale.
Posted
11 days ago
MYR3,000 - MYR6,000 Per Month
Fresh Graduates
- Providing engineering and technical support for heavy lifting and transport projects
- Preparing method statements, lifting plans, and technical documentation
- Coordinating with project managers, supervisors, and site teams to ensure project requirements are met ...
Posted
2 days ago
MYR4,000 - MYR5,500 Per Month
- Demonstrate technical expertise on process and product technologies to support design, optimization, validation, and troubleshooting.
- Monitor equipment and process performance, conducting root cause analysis for non-conformances, low yields, and other quality or production issues.
- Communicate effectively and collaborate with peers, operations management, and supporting divisions including Production, Sustaining Engineering, and Quality. ...
Be an early applicant!
Posted
a month ago
MYR2,500 - MYR3,500 Per Month
Fresh Graduates
- Machinery & Equipment: Supports multi-discipline manufacturing processes of the repair, maintenance, installation, and/or enhancement of a select group of machinery and equipment or interrelated systems.
- Process/Product/Production: Provides technical support in chemical, electronic or mechanical operations, tests, experiments, and/or problem resolution associated with components, parts, products, or processes/systems.
- Fabrication: Responsible for performing various technical support and/ or production duties concerning wafer fabrication or related devices/ equipment, processes, and handling systems. ...
Be an early applicant!
Posted
14 hours ago
Chat Available
MYR4,000 - MYR5,500 Per Month
Near Train Station
- Mechanical engineers conduct research
- Advise on design, and direct production of machinery and industrial plant, equipment and systems..
- Mechanical engineers conduct research ...
Posted
6 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Responsible for reliability testing support with loading and unloading of integrated circuit devices onto biased boards and chambers activities. Ensure to meet cycle time and zero quality issue.
- Support electrical testing and data-logging of integrated circuit devices using automated test equipment.
- Bench testing and debugging of reliability test circuits / boards verification. ...
Be an early applicant!
Posted
25 days ago
MYR5,500 - MYR8,500 Per Month
- Develop, maintain, and optimize production testing processes and equipment.
- Set up, troubleshoot, debug, and maintain Automated Test Equipment (ATE) and test systems.
- Support New Product Introduction (NPI), engineering builds, and production transfers. ...
Posted
6 days ago
MYR5,500 - MYR8,500 Per Month
- Monitor and improve product quality throughout the manufacturing process.
- Investigate quality issues, perform root cause analysis, and implement corrective and preventive actions (CAPA).
- Work closely with Production, Engineering, and other departments to resolve quality-related concerns. ...
Posted
6 days ago
MYR1,800 - MYR2,800 Per Month
+Additional Compensation
Fresh Graduates
- Incoming QC
- • Responsible to inspect and ensure incoming materials are complied with design standard / specification; correspond with internal department and suppliers for parts quality.
- • Review purchase products in area of incoming section certificates, report etc and ensuring product specifications are met and preparing IQC reports. ...
Posted
3 days ago
Electrical Engineer Solar Farm
Undisclosed
Fresh Graduates
- Electrical Engineers design, implement, maintain, and improve electrical instruments, equipment, facilities, and components for PV systems; and teach photovoltaic theory and practice to engineers, technicians, and installers.
Posted
4 days ago
Chat Available
Equipment Engineer (Mandarin Speaker)
MYR3,000 - MYR5,000 Per Month
- Responsible for installation, setup and commissioning of production equipment.
- Perform preventive maintenance (PM) and corrective maintenance.
- Troubleshoot electrical, mechanical and automation issues. ...
Posted
2 days ago
Chat Available
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
- Market Development: Identify and reach out to potential B2B clients in the manufacturing sector to expand our market footprint.
- Client Consultations: Conduct client meetings, presentations, on-site visits to factories and production lines to understand clients' requirements and production challenges.
- Technical Support: Collaborate with the technical team to provide basic automation proposals and product specifications tailored to client needs. ...
Be an early applicant!
Posted
6 days ago
Chat Available
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
- Market Development: Identify and reach out to potential B2B clients in the manufacturing sector to expand our market footprint.
- Client Consultations: Conduct client meetings, presentations, on-site visits to factories and production lines to understand clients' requirements and production challenges.
- Technical Support: Collaborate with the technical team to provide basic automation proposals and product specifications tailored to client needs. ...
Be an early applicant!
Posted
6 days ago
Chat Available
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
- Market Development: Identify and reach out to potential B2B clients in the manufacturing sector to expand our market footprint.
- Client Consultations: Conduct client meetings, presentations, on-site visits to factories and production lines to understand clients' requirements and production challenges.
- Technical Support: Collaborate with the technical team to provide basic automation proposals and product specifications tailored to client needs. ...
Be an early applicant!
Posted
6 days ago
MYR5,000 - MYR12,000 Per Month
- Oversee deployment and maintenance of genset fleet nationwide
- Coordinate chargeman team scheduling and emergency response
- Manage diesel procurement and consumption reporting ...
Posted
4 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Responsible for performing variety of job duties within a manufacturing environment.
- Duties may be related to production assembly, test & Materials handling and others example collect items at Main Store or Mini Store.
- Performs assembly and testing with reference to work instructions, ensure good quality product to meet the schedule for shipment. ...
Posted
a month ago
Undisclosed
- Responsible for ensuring aircraft availability on daily basis for timely scheduled departure towards effective maintenance.
- To ensure aircrafts are available to meet network demand from operations perspective on daily basis up to 48 hours.
- To load task against the available resources in Line Maintenance Operation (LMO) / Line Maintenance Stations. To check all tasks are within target and rectified within efficient timescales. ...
Be an early applicant!
Posted
a month ago
MYR2,500 - MYR4,000 Per Month
- Blueprint & Product Analysis: Study and analyze engineering drawings to understand product characteristics and structure, providing a technical basis for production process planning.
- Sample Production & Validation: Modify drawings as needed, participate in mold trials and engineering sample production, and validate manufacturability of processes.
- Process Planning & Documentation: Develop or optimize production processes based on drawings and sample experience, ensuring standardized and efficient workflows. ...
Posted
a month ago
Chat Available
MYR3,500 - MYR5,000 Per Month
- Install, commission, and validate new production equipment and manufacturing lines.
- Perform machine setup, installation, and integration to ensure operational readiness.
- Collaborate with vendors and suppliers to procure, install, and integrate tooling, fixtures, and equipment. ...
Posted
10 days ago
MYR1,700 - MYR2,200 monthly
Fresh Graduates
Near Train Station
- Perform assembly, set up & installation according to spec/drawing.
- Perform related task assigned by production manager on assembly process
- Committed to IPC training transfer from Engineers.
Posted
21 days ago
Chat Available
MYR1,800 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
Near Train Station
- To set up and operate plastic injection moulding/ plastic extrusion machine operation and troubleshooting
- To operate blow moulding as per expectation
- To set up tooling and machine upkeeping and maintenance ...
Posted
a month ago
SGD3,100 - SGD3,600 monthly
Singapore, Singapore
- Key Responsibilities:
- • Improve overall machine uptime and support maintenance department KPIs
- • Perform corrective and preventive maintenance on plant machinery ...
Posted
a month ago
Chat Available
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
- Develop new products based on customer requirements
- Review technical drawings and specifications
- Prepare product BOM and technical documents ...
Posted
a month ago
Chat Available
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
Near Train Station
- Perform routine maintenance and calibration of equipment.
- Troubleshoot and diagnose technical issues under supervision.
- Document test results and maintain accurate records. ...
Posted
25 days ago
MYR2,400 - MYR3,600 Per Month
- Diploma or Certificate in Mechanical or Electrical Engineering, or a related field.
- Minimum 2 years of experience as a Mechanical or Electrical Technician, preferably in a manufacturing or industrial setting.
- Proficient in the use of tools and equipment used in the maintenance and repair of mechanical and electrical systems. ...
Be an early applicant!
Posted
4 days ago