Manufacturing Technician Jobs in Bayan Lepas - September 2026 - Urgent Hiring
search.result_querys_job
"manufacturing technician"
text.in Bayan Lepas
MYR2,200 - MYR4,500 Per Month
- Responsible for performing a variety of technical support duties in one or more manufacturing areas.
- Duties may be related to installation, maintenance, repair and support of manufacturing equipment, technical support of one or more production processes, product test and troubleshooting, and technical analyses and problem-solving.
- Conducts tests, experiments and/or problem resolution associated with components, parts, products or processes/systems. ...
Be an early applicant!
Posted
a month ago
Chat Available
MYR2,200 - MYR4,500 Per Month
- Responsible for performing a variety of technical support duties in one or more manufacturing areas.
- Duties may be related to installation, maintenance, repair and support of manufacturing equipment, technical support of one or more production processes, product test and troubleshooting, and technical analyses and problem-solving.
- Conducts tests, experiments and/or problem resolution associated with components, parts, products or processes/systems. ...
Posted
a month ago
Chat Available
Technician (Penang)
MYR1,800 - MYR2,600 Per Month
Fresh Graduates
- Perform welding works.
- Install Water Treatment Systems, Rainwater Harvesting (RWH), IC & ER, pumps, piping, and frontal piping on site.
- Plan and develop solutions for customers, including troubleshooting. ...
Be an early applicant!
Posted
6 days ago
Chat Available
MYR4,000 - MYR6,000 Per Month
- Responsible for the assembly, integration, testing, troubleshooting, and improvement of automation machinery and equipment according to engineering drawings, work instructions, and quality standards.
- Assemble automation machines, modules, and mechanical sub-assemblies according to engineering drawings, BOMs, and work instructions.
- Perform mechanical fitting, alignment, adjustment, and integration of machine components. ...
Be an early applicant!
Posted
2 days ago
Chat Available
Technician (Penang)
MYR1,800 - MYR2,600 Per Month
+Additional Compensation
Fresh Graduates
- Perform welding works.
- Install Water Treatment Systems, Rainwater Harvesting (RWH), IC & ER, pumps, piping, and frontal piping on site.
- Plan and develop solutions for customers, including troubleshooting. ...
Be an early applicant!
Posted
11 hours ago
Chat Available
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform Failure Analysis & Fault Isolation (FAFI) to determine defect modes and root causes.
- Conduct electrical failure analysis to identify component defects and support factory rejection cases.
- Carry out validation and fault isolation using tools such as Parametric Analyzer, Keithley meter, iTDR, SEM/EDX, and IRLC. ...
Be an early applicant!
Posted
6 days ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment (Cu Clip Inline Machine and all Offline Machine).
- Verify machine settings and ensure calibration is correct before starting operations. ...
Be an early applicant!
Posted
9 days ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment (Cu Clip Inline Machine and all Offline Machine).
- Verify machine settings and ensure calibration is correct before starting operations. ...
Be an early applicant!
Posted
17 days ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Be an early applicant!
Posted
15 days ago
Chat Available
Undisclosed
- To perform routine product sustaining functions. F/A and to resolve any engineering issues.
- To perform process engineering, process optimization, new material qualification, cost reduction, quality, yield and output improvement.
- Provide engineering support in trouble-shooting line and product's related problem. ...
Be an early applicant!
Posted
14 days ago
Chat Available
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
14 days ago
Chat Available
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Be an early applicant!
Posted
14 days ago
Chat Available
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Be an early applicant!
Posted
14 days ago
Chat Available
MYR2,200 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
- Perform Test sequent for unit under test, Identify and troubleshoot processes, material, or equipment issues to minimize down time and recommend solutions.
- Perform test related tasks for unit under test via Test platform provided by Company,
- Trouble shoot test unit, perform debugging for minor Test failure unit. ...
Be an early applicant!
Posted
a day ago
Chat Available
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
14 days ago
Chat Available
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
14 days ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Be an early applicant!
Posted
15 days ago
Chat Available
Undisclosed
- Analyse data and monitor implementation of al Process and Quality Control Strategy.
- Drive for quality continuous improvement project (Minimize Manual Touch Point, E-system (eliminate manual recording)
- Monitor of critical process CPK data of ensuring a stable process to maintain product quality. ...
Be an early applicant!
Posted
14 days ago
Chat Available
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Be an early applicant!
Posted
a month ago
Undisclosed
- Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Be an early applicant!
Posted
a month ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Be an early applicant!
Posted
15 days ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Be an early applicant!
Posted
15 days ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Be an early applicant!
Posted
15 days ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Be an early applicant!
Posted
15 days ago
Chat Available
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
14 days ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Be an early applicant!
Posted
15 days ago
Chat Available
Undisclosed
- Analyse data and monitor implementation of al Process and Quality Control Strategy.
- Drive for quality continuous improvement project (Minimize Manual Touch Point, E-system (eliminate manual recording)
- Monitor of critical process CPK data of ensuring a stable process to maintain product quality. ...
Be an early applicant!
Posted
14 days ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment (Cu Clip Inline Machine and all Offline Machine).
- Verify machine settings and ensure calibration is correct before starting operations. ...
Be an early applicant!
Posted
17 days ago
Chat Available
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Be an early applicant!
Posted
15 days ago