Jobs
Companies
Forums
Manufacturing Technician Jobs in Johor - October 2026 - Urgent Hiring - Page 6
Showing 186 jobs results for
"manufacturing technician"
in Johor
Never miss any updates for Manufacturing Technician jobs in Johor
Manage Alert
MYR5,000 - MYR8,000 Per Month
- Lead the development, procurement and implementation of off the shelf standard solutions and/or develop new standard automation solutions to support customer product manufacturing equipment needs
- Plan and lead the hardware and software improvements of automated lines and off the shelf equipment, via the analysis of Overall Equipment Efficiency (OEE) and other available data
- Own the communications with multiple stakeholders including solution providers for design, technical information and specifications ...
Posted
20 days ago
Undisclosed
- Own day-to-day supplier quality management for the site's critical/major-tier suppliers, including electronic component, PCBA, and electromechanical assembly suppliers.
- Lead containment, root cause investigation, and corrective action (SCAR) for supplier-related nonconformances, with particular attention to electrical/electronic failure modes (e.g., solder defects, component tolerance issues, firmware/test escapes).
- Review and disposition incoming inspection escalations for electronic and electromechanical components, partnering with Manufacturing Engineering and Test Engineering as needed. ...
Posted
20 days ago
MYR4,000 - MYR7,000 Per Month
- Possess a valid Steam Engineer Certificate of Competency Grade 1 or 2 from DOSH Malaysia.
- Minimum of 3-5 years working experience in boiler and steam turbine operations.
- Minimum Degree Holder ...
Posted
20 days ago
Undisclosed
- Act as the primary technical liaison with customers from project handover through NPI, customer approval, and mass production.
- Lead and coordinate new projects, ensuring project timelines, quality, cost, and customer requirements are achieved.
- Review customer drawings, specifications, BOM, and product requirements to assess manufacturing feasibility and technical requirements. ...
Posted
11 days ago
OTT CREATION MARKETING
MYR2,400 - MYR2,600 Per Month
Tampoi
- Assist Engineer to improve manufacturing efficiency by optimization of workflow, space requirements, and equipment layout.
- Assist Engineer to design jigs and fixtures for production.
- Perform simple electrical wiring projects. ...
Posted
17 days ago
MYR2,000 - MYR2,800 Per Month
- Perform in-process quality inspections during production.
- Check products against specifications, drawings, work instructions, and quality standards.
- Conduct measurements using tools such as vernier calipers, micrometers, gauges, height gauges, and other inspection equipment. ...
Posted
17 days ago
MYR2,900 - MYR5,000 Per Month
- Deploy, implement, maintain, and optimize Manufacturing Execution Systems (MES).
- Integrate MES with ERP systems, particularly SAP.
- Develop and maintain APIs for system integration and data exchange. ...
Posted
16 days ago
Undisclosed
Malaysia
- Prepare and manage cost plans, estimates, budgets, and forecasts across all project stages.
- Monitor project costs and provide commercial advice to support key project decisions.
- Support value engineering initiatives and cost optimization exercises. ...
Posted
25 days ago
Undisclosed
- Minimum 3 years of experience in PCBA and functional test systems troubleshooting.
- Strong experience in automated test systems and instrumentation troubleshooting.
- Experience in tester setup, debugging, buy-off and preventive maintenance. ...
Posted
21 days ago
Undisclosed
Malaysia
- Prepare and manage cost estimates, feasibility studies, budgets, and detailed cost plans across all project stages.
- Provide cost advice during design development, supporting informed decision-making and budget alignment.
- Develop benchmarking data and cost models for CSA and MEP packages. ...
Posted
a month ago
Undisclosed
- Monitor actual quality implementation at site involving Project Quality Plan (PQP) to ensure the established Quality Management System (QMS) in accordance with ISO 9001:2015 is implemented and maintained at all level within the project organisation.
- Accountable for the precise knowledge of all aspects of engineering construction relating to Civil and Structural (C&S), Mechanical and Electrical (M&E) and Architectural discipline interfacing the multidisciplinary processes.
- Report to QAQC Manager/HOD on the progress and performance of the QMS. ...
Posted
a month ago
OTT CREATION MARKETING
MYR3,000 - MYR3,500 Per Month
- Coordinate and monitor site activities to ensure works are carried out in accordance with specifications, quality, and safety standards
- Assist in planning and coordination of project activities to meet project timeline and objectives
- Prepare and submit technical drawings, work programmes, and material samples for client or main contractor approval ...
Posted
16 days ago
MYR4,000 - MYR6,500 Per Month
- Inspect and monitor site activities to ensure works comply with approved drawings, specifications, and contract requirements.
- Ensure construction works are carried out in accordance with quality standards and safety regulations.
- Conduct routine site inspections and report any non-conformance or defects to the Project Manager and relevant parties. ...
Posted
16 days ago
MYR3,000 - MYR6,000 Per Month
- Ensure compliance with ISO 13485, GMP, FDA 21 CFR Part 820, and company Quality Management System (QMS).
- Monitor manufacturing processes to ensure product quality meets customer and regulatory requirements.
- Lead investigations on product non-conformances, customer complaints, and manufacturing deviations. ...
Posted
16 days ago
MYR3,500 - MYR4,000 Per Month
- Coordinate and monitor site activities to ensure works are carried out in accordance with specifications, quality, and safety standards
- Assist in planning and coordination of project activities to meet project timeline and objectives
- Prepare and submit technical drawings, work programmes, and material samples for client or main contractor approval ...
Posted
17 days ago
MYR2,000 - MYR2,500 Per Month
Tampoi
- Inspect incoming electronic components, PCB, mechanical parts, packaging materials, and other materials.
- Check materials according to specifications, samples, BOM, drawings, and inspection standards.
- Check part number, quantity, labeling, appearance, packaging, and material condition. ...
Posted
16 days ago
Undisclosed
- Act as the primary technical liaison with customers from project handover through NPI, customer approval, and mass production.
- Lead and coordinate new projects, ensuring project timelines, quality, cost, and customer requirements are achieved.
- Review customer drawings, specifications, BOM, and product requirements to assess manufacturing feasibility and technical requirements. ...
Posted
a month ago
Undisclosed
- Oversee team members to ensure efficient task completion and adherence to processes in maintenance programs
- Plan and coordinate maintenance engineering work, including reviewing mechanical and electrical engineering specifications
- Perform engineering reviews of proposed new equipment designs for reliability and maintenance ...
Posted
a month ago
MYR1,800 - MYR2,500 Per Month
Tampoi
- Perform quality inspection during the electronic production process.
- Inspect PCB/PCBA and electronic products according to work instructions and inspection standards.
- Perform visual inspection for soldering defects, missing components, wrong components, component damage, solder bridges, insufficient solder, and other defects. ...
Posted
16 days ago
Undisclosed
Malaysia
- Own and sustain Lead Lock Tape and Lead Trimming assembly processes.
- Define, optimize, and troubleshoot process parameters to ensure stable output, high yield, and product quality.
- Support tooling design, qualification, modification, and troubleshooting for leadframe and assembly operations. ...
Posted
a month ago
MYR2,000 - MYR2,800 Per Month
- Perform in-process quality inspections during production.
- Check products against specifications, drawings, work instructions, and quality standards.
- Conduct measurements using tools such as vernier calipers, micrometers, gauges, height gauges, and other inspection equipment. ...
Posted
a month ago
Browse Location:
More Location
Browse Company:
More Companies
Browse "manufacturing technician" Job By:
Browse "manufacturing technician" Job By: