Manufacturing Technician Jobs in Pulau Pinang - October 2026 - Urgent Hiring
Showing 30 jobs results for
"manufacturing technician"
in Pulau Pinang
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
5 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
20 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
20 days ago
MYR4,000 - MYR6,000 Per Month
- Responsible for the assembly, integration, testing, troubleshooting, and improvement of automation machinery and equipment according to engineering drawings, work instructions, and quality standards.
- Assemble automation machines, modules, and mechanical sub-assemblies according to engineering drawings, BOMs, and work instructions.
- Perform mechanical fitting, alignment, adjustment, and integration of machine components. ...
Posted
a month ago
MYR2,800 - MYR3,200 Per Month
Fresh Graduates
- What You’ll Work On
- PCB Design Support – 35%Support schematic and PCB layout preparation using Altium Designer, and prepare Gerber, stencil and other production-ready files.
- Mechanical Design Support – 25%Create and update 3D designs and technical drawings, including files for 3D printing and laser cutting. ...
Be an early applicant!
Posted
3 days ago
Undisclosed
- Assist on mechanical assembly/electrical assembly, installation and testing of equipment to time deadlines.
- Assemble and integrate a variety of mechanical and electrical assemblies.
- Follow oral/written instructions provided by the team leader, supervisor and/or engineering to complete assembly tasks. ...
Be an early applicant!
Posted
a month ago
MYR2,200 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
- Perform Test sequent for unit under test, Identify and troubleshoot processes, material, or equipment issues to minimize down time and recommend solutions.
- Perform test related tasks for unit under test via Test platform provided by Company,
- Trouble shoot test unit, perform debugging for minor Test failure unit. ...
Posted
a month ago
MYR3,500 - MYR5,500 Per Month
- Lead the site Maintenance function in providing both a reactive and proactive, multi-skilled maintenance service on all operational equipment and facilities infrastructure. Responsible for planned scheduling creation and overseeing the adherence and timely completion of work carried out. Increase the site operational effectiveness, improve on project delivery, mean time between failure and downtime reduction, and manage and implement improvement plans, driving Key Performance Indicators (KPI's) ensuring that EHS requirements are adhered to. Manage the team on technical best practice and establish standard policies and procedures whilst also mentoring and leading the team. Implement and manage continuous improvement and modern manufacturing principals by highlighting deficiencies and recommending changes in training, working practices and processes.
- Maintenance (scope includes building and equipment's)
- · Planning of maintenance works i.e., manpower, parts, scheduling. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
2 months ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
2 months ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
2 months ago
Undisclosed
- To perform routine product sustaining functions. F/A and to resolve any engineering issues.
- To perform process engineering, process optimization, new material qualification, cost reduction, quality, yield and output improvement.
- Provide engineering support in trouble-shooting line and product's related problem. ...
Posted
2 months ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
2 months ago
MYR8,000 - MYR15,000 Per Month
- Lead the process design and optimization of water treatment systems, specialty gas supply systems and chemical delivery systems, formulate technical schemes, process flows and equipment selection standards;
- Responsible for semiconductor/ pharmaceutic project process systems (including UPW, Wastewater treatment, special gas and chemical distribution) calculation and drawings based on project criteria and client/national codes;
- Manage the process team in project implementation, review design drawings, technical parameters and construction schemes, and solve key process problems in system commissioning and operation; ...
Be an early applicant!
Posted
12 days ago
Undisclosed
- Optimization on metal work machine production flow and output.
- To review the new drawing metal work fabrication capabilities and provide the process flow, BOM, estimate production lead time for MES BOO & BOM.
- Establish WI for process plan, process WI and machine operation/set-up procedure for Metal Work processes. ...
Be an early applicant!
Posted
a month ago
MYR4,000 - MYR4,999 Per Month
- Supervise and coordinate all die casting operations across multiple shifts.
- Ensure adherence to production schedules, quality standards, and safety procedures.
- Monitor machine performance and casting parameters to ensure product consistency and reduce defects. ...
Posted
2 months ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
2 months ago
MYR2,000 - MYR2,800 Per Month
- Perform routine and preventive maintenance on moulds as per schedule.
- Troubleshoot, diagnose, and repair mould-related issues (e.g., flash, short shot, wear and tear).
- Disassemble, clean, inspect, and reassemble mould components. ...
Be an early applicant!
Posted
2 months ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
2 months ago
Undisclosed
- Analyse data and monitor implementation of al Process and Quality Control Strategy.
- Drive for quality continuous improvement project (Minimize Manual Touch Point, E-system (eliminate manual recording)
- Monitor of critical process CPK data of ensuring a stable process to maintain product quality. ...
Posted
2 months ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
2 months ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
2 months ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
2 months ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
- Assist in the daily production activities, ensuring smooth operations and adherence to production schedules and quality standards.
- Support senior engineers in implementing and monitoring lean manufacturing principles and process improvement initiatives to enhance efficiency and reduce waste.
- Participate in root cause analysis for production issues and contribute to the development and implementation of corrective actions. ...
Posted
20 days ago
MYR2,500 - MYR3,500 Per Month
- Assemble electrical and electronic components according to technical drawings and schematics.
- Perform wiring, soldering, and testing of electrical components.
- Ensure all assembly work complies with safety and quality standards. ...
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
- Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
- Shows patience and consistency in performing repetitive measurement tasks.
- Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...
Posted
2 months ago
MYR3,000 - MYR4,500 Per Month
George Town, Pulau Pinang
- Performing analysis, design and drafting for building, structure, infrastructure, foundation and ensuring the optimum engineering design solution and details for construction use.
- Preparing cost estimation, bill of quantities, tender documents and assessment report.
- Liaison with client, consultants, authorities, contractors and suppliers to understand the project requirements and expectations. ...
Posted
19 days ago
MYR3,500 - MYR5,500 Per Month
- Lead the site Maintenance function in providing both a reactive and proactive, multi-skilled maintenance service on all operational equipment and facilities infrastructure. Responsible for planned scheduling creation and overseeing the adherence and timely completion of work carried out. Increase the site operational effectiveness, improve on project delivery, mean time between failure and downtime reduction, and manage and implement improvement plans, driving Key Performance Indicators (KPI's) ensuring that EHS requirements are adhered to. Manage the team on technical best practice and establish standard policies and procedures whilst also mentoring and leading the team. Implement and manage continuous improvement and modern manufacturing principals by highlighting deficiencies and recommending changes in training, working practices and processes.
- Maintenance (scope includes building and equipment's)
- · Planning of maintenance works i.e., manpower, parts, scheduling. ...
Posted
a month ago
MYR6,000 - MYR8,000 Per Month
George Town, Pulau Pinang
- Develop and maintain PLC software for automation and test systems.
- Build UI/UX interfaces for operators, engineers, and internal users.
- Develop algorithms for control logic, automation sequencing, data handling, and system optimisation. ...
Posted
a month ago