Mechanical Engineer Engineering Jobs in Kedah - October 2026 - Urgent Hiring

Product Engineer (MECA Coordinator) Product Engineer (MECA Coordinator)

Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...

Manufacturing

Be an early applicant!

Posted

2 days ago

RPD MFG Connectivity Sdn. Bhd.

Undisclosed

Mechanical Process Engineer (Mandarin Speaker) Mechanical Process Engineer (Mandarin Speaker)

Write, review and maintain Engineering Change Management (ECM) documentation and work instructions.
Ensure documentation compliance with IPC/WHMA-A-620 and ISO 9001 requirements.
Responsible for developing safe, efficient and cost-effective manufacturing processes and procedures. ...

Manufacturing

Be an early applicant!

Posted

2 days ago

Ecosphere Clean Global Sdn. Bhd.

MYR4,500 - MYR7,000 Per Month

Mechanical Engineering Process Engineering

Develop, monitor, and improve manufacturing processes within clean room environments.
Ensure compliance with clean room protocols, safety standards, and quality requirements.
Analyze production/process issues and implement corrective and preventive actions ...

Posted

13 days ago

M&E Engineer (Construction) M&E Engineer (Construction)

EUPE CORPORATION BERHAD

Undisclosed

Junior Mechanical Engineer Junior Mechanical Engineer

Sungai Petani, Kedah

Coordinate and supervise all M&E activities, including HVAC, plumbing, fire protection, electrical systems, and building automation.
Review M&E designs, drawings, and specifications to ensure compliance with project requirements.
Liaise with consultants, contractors, and vendors to resolve technical and site-related issues. ...

Communication

Be an early applicant!

Posted

a month ago

Ecosphere Clean Global Sdn. Bhd.

MYR4,500 - MYR7,000 Per Month

Mechanical Engineering Process Engineering

Develop, monitor, and improve manufacturing processes within clean room environments.
Ensure compliance with clean room protocols, safety standards, and quality requirements.
Analyze production/process issues and implement corrective and preventive actions ...

Posted

13 days ago

Engineer II, Mechanical Systems Engineering Engineer II, Mechanical Systems Engineering

Entegris

Engineer I, Mechanical Systems Engineering Engineer I, Mechanical Systems Engineering

Design mechanical components, assemblies and sub-systems for UHP gas purification systems.
Size and select components as required to meet UHP gas purifier system design, performance, safety, reliability and compliance requirements.
Create and maintain solid models, engineering drawings, design specifications, BOMs, procedures and other required documents to support development of systems. ...

Posted

16 days ago

Entegris

Industrial Engineering Intern Industrial Engineering Intern

Design mechanical components, assemblies and sub-systems for UHP gas purification systems.
Size and select components as required to meet UHP gas purifier system design, performance, safety, reliability and compliance requirements.
Create and maintain solid models, engineering drawings, design specifications, BOMs, procedures and other required documents to support development of systems. ...

Posted

24 days ago

Entegris

Process Engineer ( CNC Machining ) Process Engineer ( CNC Machining )

Conduct cycle time studies and evaluate current operational processes.
Collect, organize, and analyze production and workflow data to identify trends and improvement opportunities.
Support routing analysis and recommend improvements to enhance operational efficiency. ...

Posted

23 days ago

FAMAX Technology (M) Sdn. Bhd

Senior Project Engineer Mechanical Senior Project Engineer Mechanical

Alor Setar

Candidates should possess strong skills in Process Engineering and Process Design, particularly in CNC machining environments.
Candidates should possess skills in Process Control and Analytical Skills to monitor, troubleshoot, and improve machining processes.
Candidates should possess a foundation in Chemical Engineering or related engineering disciplines, with the ability to apply engineering principles to manufacturing processes. ...

Posted

14 days ago

Essential Engineering Solution Sdn Bhd

Mechanical Design Engineer (Based at Kulim High Tech Park, Kedah) Mechanical Design Engineer (Based at Kulim High Tech Park, Kedah)

Strong mechanical engineering knowledge in HVAC, cleanroom systems, and general MEP design and coordination.
Experience in project management, including planning, scheduling, resource coordination, and progress reporting.
Ability to review and prepare technical drawings, calculations, specifications, and engineering documentation. ...

Posted

17 days ago

Watlow

Mechanical Technician Mechanical Technician

Lunas

Interpret customer specifications, produce CAD models and supporting drawings, product documentation, design and fabricate tools; design and build equipment and prototypes; design and conduct experiments; design, gather and evaluate test results; produce test reports and other documentation.
MUST be willing to work at Kulim High Tech Park, Kedah
Focuses on improving existing products or processes that impact technical area or local plant; ...

Posted

5 days ago

Omya

Senior Technician Maintenance Senior Technician Maintenance

Inspect, troubleshoot and repair all plant mechanical equipment as directed by superior.
Make periodic inspections of plant equipment and report its condition to the supervisor for further evaluation.
Regularly communicate interdepartmentally on the status of jobs, projected completion time, and the need (if any) for assistance. ...

Posted

a day ago

Infineon Technologies

Senior Technician Maintenance Senior Technician Maintenance

Perform routine Preventive Maintenance (PM) for multiple functional area
Perform standard calibration on the Preventive Maintenance equipment
Fill up Preventive Maintenance documentation as required (eg e-checklist, TECO) ...

Posted

15 hours ago

Infineon Technologies

Technician-Snr Technician-staff Technician Technician-Snr Technician-staff Technician

Perform routine Preventive maintenance (PM) and troubleshooting for more than single functional area
Perform standard calibration on the Preventive maintenance equipment
Fill up PM documentation as required (eg e-checklist, TECO) ...

Posted

12 hours ago

Infineon Technologies

Engineer II, Manufacturing Engineering Engineer II, Manufacturing Engineering

Perform routine Preventive Maintenance (PM) for multiple functional area.
Perform standard calibration on the PM equipment.
Fill up PM documentation as required (eg e-checklist, TECO) ...

Posted

5 days ago

Entegris

Engineer II, Manufacturing Engineering Engineer II, Manufacturing Engineering

Develop and optimize manufacturing processes by designing and conducting analysis programs, applying knowledge of product design and fabrication, and implementing strategies to improve efficiency, reduce costs, and enhance product quality.
Improve manufacturing efficiency through workflow analysis, space planning, and equipment layout design. Ensure product and process quality by establishing testing methods, validating process capabilities, and setting standards.
Provide data-driven insights for manufacturing decisions and risk-based solutions to minimize production issues and meet On-Time Shipment (OTS) targets. Prepare detailed reports by collecting, analyzing, and summarizing trends. ...

Posted

12 days ago

Entegris

Senior Engineer Failure Analysis Senior Engineer Failure Analysis

Job Title:

Posted

12 days ago

Infineon Technologies

Engineer II, Manufacturing Engineering Engineer II, Manufacturing Engineering

Perform up to medium level of Discrete and IC FA including electrical verification and fault isolation on package and wafer samples.
Perform sample preparation and microscopy inspection for clear visualization of package and wafer level defects
Prepare FA reports that can lead to root cause finding and corrective action to cross functional team. ...

Posted

9 hours ago

Entegris

Facility Mechanical - Electrical Engineer Facility Mechanical - Electrical Engineer

Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators.
Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors.
Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. ...

Posted

19 days ago

JLL

Manufacturing Specialist - Mechanical Assembly Process ( 6 months contract) Manufacturing Specialist - Mechanical Assembly Process ( 6 months contract)

Yan

Gathering and analyzing data, blueprints, and reports.
Determining facility and equipment specifications.
Analyzing project costs and preparing budgets. ...

Posted

22 days ago

BCM ELECTRONICS CORPORATION SDN BHD

Mechanical Technician Mechanical Technician

Assemble mechanical components and sub-assemblies according to work instructions and engineering drawings.
Perform mechanical fitting, fastening, and basic adjustment of robotic equipment and systems.
Conduct visual inspections and basic quality checks during assembly. ...

Posted

13 days ago

Omya

Preventive and Corrective Maintenance Technician Preventive and Corrective Maintenance Technician

Inspect, troubleshoot and repair all plant mechanical equipment as directed by superior.
Make periodic inspections of plant equipment and report its condition to the supervisor for further evaluation.
Regularly communicate interdepartmentally on the status of jobs, projected completion time, and the need (if any) for assistance. ...

Posted

23 days ago

JLL

Shift M-E Technician Shift M-E Technician

Yan

Operate, monitor, and maintain HVAC systems (chillers, AHUs, cooling towers).
Maintain and troubleshoot pumps and exhaust systems to ensure continuous operation.
Inspect, clean, lubricate, and adjust mechanical equipment as per PM schedules. ...

Posted

14 days ago

JLL

Facilities Mechanical Engineer Facilities Mechanical Engineer

Yan

Operate and monitor HVAC systems (chillers, AHUs, cooling towers) to maintain environmental conditions.
Operate and maintain Oil-Free Air (OFA / CDA) systems for reliable compressed air supply.
Operate and maintain Process Vacuum (PVAC) systems. ...

Posted

14 days ago

JLL

ME Engineer Sr ME Engineer Sr

Operations & Maintenance
Manage day-to-day operation of mechanical systems such as chillers, AHUs, cooling towers, pumps, compressors, and piping systems.
Conduct preventive and corrective maintenance to ensure equipment reliability and minimize downtime. ...

Posted

24 days ago

Jabil

Mechanical Design Engineer (Based at Kulim High Tech Park, Kedah) Mechanical Design Engineer (Based at Kulim High Tech Park, Kedah)

Sungai Petani

Strives to achieve excellence in all endeavors.
Be a creative and proactive contributor on the management team, focused on continuous improvement at all times.
Directs Manufacturing Engineering Technicians on their assigned lines in the observation of machine and line performance, and provide guidance in the determination of the necessary steps to achieve optimum machine and process efficiency. ...

Posted

24 days ago

Watlow

Senior Engineer Failure Analysis Senior Engineer Failure Analysis

Lunas

Interpret customer specifications, produce CAD models and supporting drawings, product documentation, design and fabricate tools; design and build equipment and prototypes; design and conduct experiments; design, gather and evaluate test results; produce test reports and other documentation.
MUST be willing to work at Kulim High Tech Park, Kedah
Focuses on improving existing products or processes that impact technical area or local plant; ...

Posted

24 days ago

Infineon Technologies

Senior Engineer Failure Analysis Senior Engineer Failure Analysis

Prepare FA reports that can lead to root cause finding and corrective action to cross functional team.

Posted

19 days ago

Infineon Technologies

Project Engineer Project Engineer

Perform up to medium level of Discrete and IC FA including electrical verification and fault isolation on package and wafer samples.
Perform sample preparation and microscopy inspection for clear visualization of package and wafer level defects
Prepare FA reports that can lead to root cause finding and corrective action to cross functional team. ...

Posted

20 days ago

UEC Cleanroon Solutions Snd Bhd