Mechanical Jobs in Selangor - September 2026 - Urgent Hiring

Assistant Mechanical Engineer Assistant Mechanical Engineer

Shah Alam

Person in charge for designated disciplines in design and technical aspects
Strong knowledge in commercial/industrial HVAC system and Piping system, preferably experienced with chiller and Air Handling Unit (AHU) design
Experience in energy optimization project would be an added advantage ...

Posted

21 days ago

CeTeau Malaysia Sdn Bhd

Internship for Service Engineer (Mechanical-Electronic) Internship for Service Engineer (Mechanical-Electronic)

Malaysia

Strong foundation in Mechanical Engineering with the ability to apply engineering principles to construction and ground improvement equipment.
Proficiency in Computer-Aided Design (CAD) / Solid Edge / Solid Works tools for creating and updating mechanical drawings and layouts.
SKM or Diploma in mechanical engineering, mechanical draughtsmanship, engineering technology in mechanical design & development OR related fields ...

Posted

21 days ago

Kuka Systems GMBH Branch Office Paris

Manager, Product Development (Mechanical - Electrical) Manager, Product Development (Mechanical - Electrical)

Petaling Jaya

During the internship period, you will be exposed to these areas:
Assist on mechanical and electronic job (e.g.: maintenance, part replacement, and troubleshooting).
Documentation preparation (e.g.: job sheet and operation manual). ...

Posted

2 days ago

Sime Darby Property

Mechanical Project Manager - Data Center Mechanical Project Manager - Data Center

Petaling Jaya

This position will require to support SHIFT 32 in mechanical & electrical (M&E) engineering aspects, through applied research, development and value creation into future products, processes and technology-related services under the Property Development segment of Sime Darby Property.
Recommend innovative, up-to-date solutions in M&E systems, including sustainable technologies, energy-efficient systems, smart building applications, etc.
Ensure compliance and alignment with project requirements, cost targets, and compliance with local authority regulations ...

Posted

16 hours ago

Turner & Townsend Pty Limited

Mechanical Project Manager - Data Center Mechanical Project Manager - Data Center

Posted

6 days ago

Turner & Townsend

Mechanical Project Manager - Data Center Mechanical Project Manager - Data Center

Manage end-to-end project lifecycle for mechanical requirements
Develop and maintain project schedules, budgets, and resource plans.
Coordinate with internal teams, contractors, and vendors to ensure smooth execution. ...

Posted

6 days ago

Turner & Townsend

Manage end-to-end project lifecycle for mechanical requirements
Develop and maintain project schedules, budgets, and resource plans.
Coordinate with internal teams, contractors, and vendors to ensure smooth execution. ...

Posted

7 days ago

Konecranes

Internship for Mechanical Engineering Internship for Mechanical Engineering

Malaysia

Responsible for providing engineering design support and solutions for crane systems and industrial lifting equipment within the assigned region. Ensures that designs meet technical specifications, safety standards, customer requirements, and company guidelines. Supports continuous product improvement and localization efforts.
Design & Development: Create and modify crane and lifting equipment designs using CAD software, 3D software and adhering to engineering standards including global and regional requirements.
Technical Support: Provide engineering support to regional sales, service, and project teams, resolving technical challenges during planning, installation, fabrication and operation. ...

Posted

a month ago

BENSHEAR TECHNOLOGY SDN BHD

Internship

Puchong

Assist engineers in designing mechanical components/systems
Prepare technical drawings using software (AutoCAD, SolidWorks)
Support testing and inspection of machines or equipment ...

Posted

22 days ago

Mayekawa

Draftsperson ( Mechanical) Draftsperson ( Mechanical)

Petaling

Calculate cooling loads, heat gains, and equipment capacities.
Generate detailed P&IDs, piping layouts, and 3D models.
Specify compressors, evaporators, condensers, and expansion valves. ...

Posted

a month ago

YYZ Bina Resources

Mechanical Design Engineer Mechanical Design Engineer

Selayang

Prepare drawings with computer aided design using Auto CAD and other design software within the timeline.
Confirm information for all mechanical & piping design works and also coordination for all related instruments and equipment related to noise control and Genset operations
Re-work drawing and modification drawings according to the update information and requirements. ...

Posted

a month ago

SATAKE MULTIMIX (M) SDN. BHD.

Draftsperson ( Mechanical) Draftsperson ( Mechanical)

Puchong

Prepare and revise 2D mechanical drawings using AutoCAD.
Develop fabrication, assembly, and General Arrangement (GA) drawings.
Prepare and maintain Bills of Materials (BOM) for projects. ...

Posted

22 days ago

YYZ BINA RESOURCES

Reliability Engineer Specialist, Mechanical, APAC Reliability Engineer Specialist, Mechanical, APAC

Selayang

Prepare drawings with computer aided design using Auto CAD and other design software within the timeline.
Confirm information for all mechanical & piping design works and also coordination for all related instruments and equipment related to noise control and Genset operations
Re-work drawing and modification drawings according to the update information and requirements. ...

Posted

a month ago

Vantage

MECHANICAL TECHNICIAN (HVAC) MECHANICAL TECHNICIAN (HVAC)

Posted

8 days ago

BUDIMAN NETWORK

Internship Mechanical Engineering Internship Mechanical Engineering

Kajang

Menjalankan perkhidmatan dan penyelenggaraan penyaman udara dan peralatan berkaitan ACMV.
Menjalankan pemeriksaan rutin bagi memastikan peralatan beroperasi dengan baik, selamat dan cekap.
Memastikan rekod penyelenggaraan dan servis dikemaskini dengan tepat serta menyediakan laporan bagi setiap kerja yang dijalankan. ...

Posted

22 days ago

Allied Foam Insulation Sdn Bhd

Internship

Seri Kembangan

Assist in the design and development of mechanical components and systems.
Support basic mechanical analysis related to materials and mechanisms.
Participate in design reviews and brainstorming sessions. ...

Posted

22 days ago

Principal Engineer, Mechanical Principal Engineer, Mechanical

AECOM

Principal Engineer, Mechanical Principal Engineer, Mechanical

Damansara Jaya

Posted

22 days ago

AECOM

Senior Mechanical Engineer Senior Mechanical Engineer

Damansara Jaya

Posted

22 days ago

Emerson

Engineer (Electrical - Mechanical) Engineer (Electrical - Mechanical)

Subang Jaya

No calls or agencies please.

Posted

22 days ago

AMIMAZ VENTURE

Production Technician (Mechanical) Production Technician (Mechanical)

Seri Kembangan

Produce M&E (Mechanical & Electrical) services design for tendering and construction
Prepare tender documentation, conduct tender interviews, and perform evaluations
Handle project management and contract administration ...

Posted

22 days ago

IDEAL QUALITY 3 SDN BHD

Production Supervisor (Mechanical) Production Supervisor (Mechanical)

Malaysia

To perform the preventive maintenance job and other specific task.
To support in handling any glove quality issue in the machine and machine bypass or stop or startup.
To repair or change any spare parts faulty in the machine area and troubleshooting on any machinery issue. ...

Posted

22 days ago

IDEAL QUALITY 3 SDN BHD

INTERNSHIP FOR MECHANICAL ENGINEER INTERNSHIP FOR MECHANICAL ENGINEER

Malaysia

Able to lead a team of production operators, technician, line leaders and latex man, to achieve company objectives.
Must have hands-on experience in process-related industries (e.g. oil, fluid, or chemical processing).
Knowledge in process control, products quality, maintenance skill and adequate supervisory skill. ...

Posted

22 days ago

Kejuruteraan Astra Sdn Bhd

Internship, Full Time

Shah Alam

· Degree in Mechanical Engineering
· Shall be coached by a senior executive to carry our daily site engineering and coordination work.
· Good working attitude : proactive and highly self-motivated. ...

Posted

22 days ago

Mechanical Maintenance Technician Mechanical Maintenance Technician

F&B Nutrition Sdn Bhd

Associate Director, Mechanical Associate Director, Mechanical

Teluk Panglima Garang

Performance of diagnostic test on mechanical systems.
Assisting in developing and implementing mechanical maintenance plans to prevent costly equipment breakdown.
Troubleshooting mechanical malfunctions and breakdowns and follow up repairs. ...

Posted

22 days ago

AECOM

Inspector of Works, Mechanical Inspector of Works, Mechanical

Damansara Jaya

Posted

22 days ago

Aurecon

Petaling Jaya

Site Supervision: Conduct regular inspections of M&E system installations, ensuring compliance with design specifications, codes, and local regulations.
Quality Assurance: Review method statements, material submissions, shop drawings, and as-built drawings, ensuring adherence to technical specifications and quality standards.
Collaboration: Work closely with project teams, including contractors, engineers, and project managers, to coordinate M&E work and address any technical issues that arise. ...

Posted

23 days ago

Pmx Malaysia Sdn Bhd

Manage day-to-day mechanical engineering and project activities.
Coordinate site works, subcontractors, suppliers, and project stakeholders.
Review engineering drawings, technical submissions, and installation procedures. ...

Posted

a month ago

PMX MALAYSIA SDN BHD

Mechanical Engineering Intern - Process Engineering Mechanical Engineering Intern - Process Engineering

Manage day-to-day mechanical engineering and project activities.
Coordinate site works, subcontractors, suppliers, and project stakeholders.
Review engineering drawings, technical submissions, and installation procedures. ...

Posted

a month ago

MYM Technology (M) Sdn Bhd

Mechanical Design Engineer - R-D Mechanical Design Engineer - R-D

Petaling

Assist Process Engineers in improving manufacturing processes, production efficiency and productivity
Support the development, modification and improvement of jigs, fixtures, tools and production equipment
Assist in investigating production problems and identifying the root causes of defects, downtime and process issues ...

Posted

12 days ago

Array Metal (M) Sdn Berhad