Process Engineering Jobs in Pulau Pinang - October 2026 - Urgent Hiring
Showing 72 jobs results for
"process engineering"
in Pulau Pinang
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago
MYR4,000 - MYR4,999 Per Month
- Supervise and coordinate all die casting operations across multiple shifts.
- Ensure adherence to production schedules, quality standards, and safety procedures.
- Monitor machine performance and casting parameters to ensure product consistency and reduce defects. ...
Posted
2 months ago
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
- Ensure all incoming raw materials, including paper, film, inks, adhesives, and packaging materials, are inspected according to established specifications and quality standards.
- Review inspection results and communicate non-conformities to Purchasing and relevant stakeholders.
- Coordinate with Warehouse/Raw Material Store personnel to quarantine defective materials pending disposition. ...
Be an early applicant!
Posted
4 days ago
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
- Ensure all incoming raw materials, including paper, film, inks, adhesives, and packaging materials, are inspected according to established specifications and quality standards.
- Review inspection results and communicate non-conformities to Purchasing and relevant stakeholders.
- Coordinate with Warehouse/Raw Material Store personnel to quarantine defective materials pending disposition. ...
Be an early applicant!
Posted
4 days ago
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
- Ensure all incoming raw materials, including paper, film, inks, adhesives, and packaging materials, are inspected according to established specifications and quality standards.
- Review inspection results and communicate non-conformities to Purchasing and relevant stakeholders.
- Coordinate with Warehouse/Raw Material Store personnel to quarantine defective materials pending disposition. ...
Be an early applicant!
Posted
4 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
12 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
12 days ago
Undisclosed
- Manage new product Qual/Eng till HVM.
- Handling New Product Design and Process Characterization
- Prepare and Setup new BAS and Process Flow ...
Be an early applicant!
Posted
a month ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead product transfer, NPI, and industrialization activities across Contract Manufacturing (CM) sites.
- Drive manufacturing readiness, including process development, capacity planning, equipment qualification, and production ramp-up.
- Develop and optimize scalable manufacturing processes to achieve quality, cost, delivery, and productivity targets. ...
Posted
12 days ago
Undisclosed
- Carry-out daily shiftly routines job as implemented by mold team.
- Responsible for any line issue either equipment or tooling and optimizing trouble-shooting for reducing downtime and waiting time manner
- Prioritize standby support on areas designated by crew leader/superior. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Analyse data and monitor implementation of al Process and Quality Control Strategy.
- Drive for quality continuous improvement project (Minimize Manual Touch Point, E-system (eliminate manual recording)
- Monitor of critical process CPK data of ensuring a stable process to maintain product quality. ...
Posted
a month ago
MYR3,500 - MYR5,000 Per Month
- Set up, calibrate, and operate CNC lathes and milling machines according to blueprints, technical drawings, and work orders.
- Perform routine maintenance and troubleshooting on CNC machinery to ensure optimal performance and minimize downtime.
- Read and interpret engineering drawings, blueprints, and specifications to determine machining operations, tooling, and setup requirements. ...
Be an early applicant!
Posted
a month ago
MYR4,000 - MYR6,000 Per Month
- Responsible for the electrical assembly, wiring, panel integration, testing, and troubleshooting of custom-built automation equipment.
- Assemble and install electrical components into control panels according to electrical schematics and layout drawings.
- Perform control panel wiring, cable routing, labelling, and electrical integration for automation machines. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
MYR4,000 - MYR6,000 Per Month
- Responsible for the assembly, integration, testing, troubleshooting, and improvement of automation machinery and equipment according to engineering drawings, work instructions, and quality standards.
- Assemble automation machines, modules, and mechanical sub-assemblies according to engineering drawings, BOMs, and work instructions.
- Perform mechanical fitting, alignment, adjustment, and integration of machine components. ...
Posted
a month ago
Undisclosed
- Monitor FVI yield performance.
- Support engineer for any FVI & TBE issue including low yield lot.
- Support production line in achieving Quality, Delivery, Cycle Time, and Process Improvement. ...
Posted
a month ago
Undisclosed
- Monitor FVI yield performance.
- Support engineer for any FVI & TBE issue including low yield lot.
- Support production line in achieving Quality, Delivery, Cycle Time, and Process Improvement. ...
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Monitor FVI yield performance.
- Support engineer for any FVI & TBE issue including low yield lot.
- Support production line in achieving Quality, Delivery, Cycle Time, and Process Improvement. ...
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Monitor FVI yield performance.
- Support engineer for any FVI & TBE issue including low yield lot.
- Support production line in achieving Quality, Delivery, Cycle Time, and Process Improvement. ...
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
MYR6,000 - MYR7,500 Per Month
- Responsible for the assembly, integration, testing, troubleshooting, and improvement of automation machinery and equipment according to engineering drawings, work instructions, and quality standards.
- Assemble automation machines, modules, and mechanical sub-assemblies according to engineering drawings, BOMs, and work instructions.
- Perform mechanical fitting, alignment, adjustment, and integration of machine components. ...
Good electro-mechanical equipment troubleshooting skills.
Read and orally communicate in Mandarin (writing ability not required).
+3
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago