Qc Jobs in Bayan Lepas - July 2026 - Urgent Hiring
Showing 88 jobs results for
"qc"
in Bayan Lepas
Never miss any updates for Qc jobs in Bayan Lepas
Manage Alert
MYR3,800 - MYR4,000 Per Month
- Carry out daily QA supervisory tasks and oversee QA inspectors/operators.
- Work closely with QA Engineers on product quality-related issues and improvement activities.
- Monitor product quality throughout the manufacturing process to ensure compliance with specifications. ...
Posted
16 days ago
Undisclosed
- Quality Management Systems (QMS): Implement, manage, and continuously improve the QMS in strict accordance with ISO 9001 standards.
- Project Quality Planning: Oversee document control, drive process standardization, and manage all Project Quality Planning and documentation, including the Project Quality Plan (PQP).
- Inspection Management: Define, rigorously validate, and review all Inspection & Test Plans (ITPs) to ensure operational excellence. ...
Posted
17 days ago
Undisclosed
- Responsibilities:
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.
- Ensure products meet customer specifications, drawings, and quality standards. ...
Posted
15 days ago
Undisclosed
- Create detailed, comprehensive, and well-structured test plans and test cases for manual, automated and regression testing.
- Estimate, prioritize, plan and coordinate testing activities.
- Design, develop and execute automation scripts using open-source tools. ...
Posted
17 days ago
Undisclosed
- Assisting the Executive/ Superior in the execution of the Quality Control functions to ensure products, test reports and batch records are in compliance with the quality requirements.
- Responsible to ensure compliance of product with the quality requirements. This may include the following:-
- Supervision of QCs in respective area of responsibility to ensure tests/inspections are performed efficiently according to approved test specifications, test methods, procedures, working instructions, equipment operating instruments and guidelines (where applicable). ...
Posted
16 days ago
Undisclosed
- Participate in Non-conformance issue part containment and disposition discussion, and execution during quality incident.
- Responsible for review and approval of discrepant lot disposition in eNCS. Hold authority to reject in the system if it does not meet release requirements.
- Lead Material Review Board (MRB) for Part Containment and Disposition. ...
Posted
14 days ago
Undisclosed
- Review product and process indicator to ensure product conform to quality requirement
- Trigger product containment when there is non conformity
- Coordinate MRB for disposition of non conformance parts ...
Posted
23 days ago
Undisclosed
- Review product and process indicator to ensure product conform to quality requirement
- Trigger product containment when there is non conformity
- Coordinate MRB for disposition of non conformance parts ...
Posted
23 days ago
MYR2,700 - MYR2,700 Per Month
- Melaksanakan kerja-kerja kimpalan dan fabrikasi logam mengikut keperluan pengeluaran.
- Membaca dan memahami lukisan teknikal serta arahan kerja.
- Memastikan hasil kimpalan memenuhi piawaian kualiti yang ditetapkan. ...
Posted
10 days ago
Undisclosed
- Executing high density package layout designs across client’s product portfolios (Test Chips, CPUs, Chipsets, SoC designs, Test Vehicles and more)
- IC package layout design including feasibility studies, substrate layout design/routing, package stack up, ballmap etc.
- Perform DRC checks, unconnected pins and dangling trace/vias and fix the design accordingly. ...
Posted
14 days ago
MYR2,100 - MYR2,400 Per Month
- Bayan Lepas: Reliably commute or planning to relocate before starting work (Required)
- -Background in EE engineering
- -Good RF knowledge ...
Posted
12 days ago
Undisclosed
- Develop, debug, and deploy test solutions for semiconductor devices on Teradyne ATE (Automatic Test Equipment) platforms.
- Supporting test program correlations and release to production activities.
- Optimize existing test solutions for yield and throughput. ...
Posted
6 days ago
MYR2,000 - MYR3,000 Per Month
- Machinery & Equipment: Support multi-discipline manufacturing processes with respect to the repair, maintenance, installation and/or enhancement of a select group of machinery and equipment or interrelated systems.
- Process/Product/Production: Provides technical support in the area of electronic or mechanical operations, tests, experiments and/or problem resolution associated with components, parts, products or processes/systems.
- Test & Repair: Tests and calibrates and/or repairs and monitors and/or installs and diagnoses equipment, systems, and/or assemblies. Works from guidelines and standardized procedures/instructions. May design/build tools. ...
Posted
10 days ago
Undisclosed
- Lead product quality team to meet departmental and organizational goals.
- Oversee in-process and final product quality inspections, provide consultation in quality across the manufacturing value stream.
- Allocate resources effectively to support production lines and quality initiatives from quality department. ...
Posted
10 days ago
Issquared Malaysia Sdn. Bhd.
MYR6,000 - MYR10,000 Per Month
- We are seeking an experienced Server Platforms Validation Sr.Engineer with deep expertise in Linux, Hyper-V, Proxmox, servers, storage systems, and datacenter operations. This role requires advanced technical knowledge to configure systems based on customer requirements and to troubleshoot and resolve complex Proxmox and Hyper-V issues.
- The position involves direct coordination and collaboration with technical personnel across multiple specializations. The environment is fast-paced with high expectations for quality, communication, and turnaround time.
- Candidates must demonstrate extensive experience with virtualization technologies, firmware patching, and Linux environments.
Posted
10 days ago
MYR1,800 - MYR2,300 Per Month
- Diploma or Advanced Diploma in Electrical Engineering, Electronic Engineering, Science, or a related discipline.
- Familiarity with semiconductor assembly and test manufacturing processes, as well as electronic packaging technologies.
- Experience in package failure analysis, low-yield analysis (LYA), or semiconductor failure investigation is an added advantage. ...
Posted
4 days ago
MYR1,700 - MYR2,684 Per Month
- Additional leave
- Health insurance
- Parental leave ...
Posted
5 days ago
MYR2,500 - MYR4,000 Per Month
- Free parking
- Meal allowance
- Opportunities for promotion ...
Posted
5 days ago
Undisclosed
- Provide technical leadership throughout the end-to-end software development life-cycle, with a concentration on systems and solution testing.
- Author, document, and execute detailed test plans and test flows, and conduct reviews with customers to ensure alignment and coverage.
- Actively participate in design reviews to provide critical feedback on testability and product quality. ...
Posted
10 days ago
Undisclosed
- Review circuit board designs for testability requirements.
- Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
- Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production. ...
Posted
11 days ago
MYR3,000 - MYR5,000 Per Month
- To handle routine activities of quality & environmental management systems related affairs.
- To establish, maintain, improve or align management system to fulfill company direction and prepare for review and approval.
- To monitor, compile report & publish the achievement of company's objectives throughout company. ...
Posted
14 days ago
ASE Electronics (M) Sdn Bhd.
MYR2,100 - MYR3,800 Per Month
- Minimum qualification is a Diploma in Electronics/Microelectronics.
- The candidate should have Failure Analysis experience in Package or Die level FA or Reliability analysis experience for a minimum of 1 year and above in semiconductor manufacturing related company.
- Well versed in using FA & Rel related equipment such as Microscope, Parametric Analyzer, X-ray, CSAM, SEM-EDX, Decapper, TDR, Micro Prober station, FTIR, HAST, Bake oven, Reflow machine, TC chamber, Burn in oven and etc. ...
Posted
24 days ago
Undisclosed
- Perform a wide variety of optical, electronic or electro-mechanical, mechanical measurement product assembly operations on assemblies or sub-assemblies.
- Determines and or follows methods and sequence of operations in performing wiring, component cleaning & installation, hand soldering, and fitting on assembly units.
- Perform mechanical and optical alignment for laser tuning. ...
Posted
17 days ago
Undisclosed
- Perform a wide variety of optical, electronic or electro-mechanical, mechanical measurement product assembly operations on assemblies or sub-assemblies.
- Determines and or follows methods and sequence of operations in performing wiring, component cleaning & installation, hand soldering, and fitting on assembly units.
- Perform mechanical and optical alignment for laser tuning. ...
Posted
17 days ago
Undisclosed
- Execute Radio Frequency Performance Test Cases for 2G/3G/4G/5G/BT/Wi-Fi Products.
- Execute power consumption, audio, EMC, signal integrity test cases.
- Execute the use case testing for the producible categories of 2G/3G/4G/5G/BT/WIFI product. ...
Posted
18 days ago
Undisclosed
- Provide technical leadership throughout the end-to-end software development life-cycle, with a concentration on systems and solution testing.
- Author, document, and execute detailed test plans and test flows, and conduct reviews with customers to ensure alignment and coverage.
- Actively participate in design reviews to provide critical feedback on testability and product quality. ...
Posted
18 days ago
Undisclosed
- Perform a wide variety of optical, electronic or electro-mechanical, mechanical measurement product assembly operations on assemblies or sub-assemblies.
- Determine and/or follow methods and sequence of operations in performing wiring, component cleaning & installation, hand soldering, and fitting on assembly units.
- Perform mechanical and optical alignment for laser tuning. ...
Posted
19 days ago
MYR2,000 - MYR3,000 Per Month
- Responsible for the tester maintaining, repairing, and spare parts management.
- Prepare master maintenance, calibration schedule, perform predictive and preventive maintenance
- To handle spare parts management or tester repair and services. ...
Posted
20 days ago
Undisclosed
- Candidates should possess a foundational understanding of Test Engineering and Testing principles.
- Candidates should possess skills in Test Execution and documenting Test Cases.
- Candidates should possess experience or academic exposure to Functional Testing and related quality assurance practices. ...
Posted
22 days ago
Job searches related to “Qc”
Browse Company:
More Companies
Browse "qc" Job By: