2,800+ Quality Engineer Jobs in Malaysia | Job Vacancies | September 2026 | Maukerja

Showing 2,849 jobs results for "quality engineer"
Never miss any updates for Quality Engineer jobs

Port Klang

  • To provide service & plan routine activities to meet target service level.
  • To carry out servicing, checking, repairing, maintenance, troubleshooting, testing, commissioning & installation of equipment at customer’s site.
  • Operating and monitoring wastewater treatment systems, including pumps, filters, dosing equipment, and related instrumentation to ensure effective treatment and compliance with environmental standards ...
Posted
21 days ago

ASE Semiconductor (Penang) Sdn Bhd

  • Assist engineers in daily engineering activities and project execution.
  • Support process improvement, troubleshooting, and problem-solving initiatives.
  • Collect, analyze, and interpret engineering data and prepare reports. ...
Posted
21 days ago
  • Support on Tester Handling (Advantest V93k), Linux Programming, Lot Disposition & Yield analytic.
  • Support NPI Test Program manual testing with engineering guideline.
  • Perform low yield/ QA verification and lot disposition. ...
Posted
21 days ago
  • Perform pre-operational checks before production commencement.
  • Inspect product quality, weight, appearance, packaging, labeling, and coding against established specifications.
  • Conduct quality inspections on raw materials, work-in-progress (WIP), and finished products. ...
Posted
21 days ago
  • Lokasi : Sg Chua, KajangGaji Kasar : RM1,800 ke atas5 hari kerja seminggu
  • Faedah:
  • - Bonus Tahunan (guaranteed) 1 bulan. dan Bonus Prestasi- Perubatan dan Insurans Percuma- Elaun Syif dan latihan kerja akan diperuntukan- KWSP, SOCSO dan ...
Posted
21 days ago

Singapore

  • Visual Inspection & Packaging Technician
  • Location: 2 Tuas View Drive, Singapore 639059
  • Reports to: Senior Manager, DP Operation ...
Posted
21 days ago

Singapore

  • Location: Gul Circle (Pick up @ Choa Chu Kang / Jurong East / Woodlands)Duration: 6 MonthsSalary: $2300Working days and hours:- 8am to 5.15pm, Monday to Friday (with 45mins lunch break, 15mins tea break)Job Description:- Perform QC testing and review of QC data to support the timely release of GeneChip arrays.- Provide data trending and assist team leads in troubleshooting failure analysis. Technical duties- Perform QC testing of GeneChip products to ensure compliance with quality specifications, particularly in compliance with ISO 13485, MDSAP and 21- CFR – 820 requirements.- Perform target preparation for Cytoscan and Axiom.- Perform review and disposition of QC batch records for release to QA.- Perform preventive maintenance for QC equipment.- Schedule QC testing and target preparation- Support and conduct in lab investigation relating to product failures & participate in the implementation of corrective actions as necessary.- Support and conduct experiment /analysis to support new product release & enhancement of test methods.- Trending & monitoring of QC test data to support failure analysis, investigation & troubleshooting.- Perform QC updates at daily Tier 1 meeting.- Support FQC Supervisor in accomplishing tasks as assigned. Administrative duties- Ensure controlled documents to support QC operation are properly maintained and readily available.- Provide training to other junior employees and QC staff as required.Job Requirements:- Min Diploma in Biomedical Engineering, Biomedical Science, Biotechnology or any relevant field
  • If interested, please send updated resume via email  jacelynchua@recruitexpress.com.sg
  • Melissa Zhang Zhiqi (Mezzo) ...
Posted
21 days ago

Perfect Pole Sdn Bhd

  • Inspection & Testing: Perform visual, physical, and functional inspections on raw materials, in-process components, and finished goods.
  • Documentation: Record inspection results, maintain, and report on data, including re-works, waste, and test results.
  • Quality Compliance: Ensure products meet established quality, safety, and company standards, including ISO 9001. ...
Posted
a month ago

Singapore

  • Salary: Up to $4,000/month (Basic + Shift Allowance + Overtime)
  • Working Hours: 8am to 8pm OR 8pm to 8am
  • Location: West ...
Posted
a month ago

Malaysia

  • · To support the Quality Control (QC) Department in daily quality activities.
  • · To assist in inspecting incoming materials, components, and gearboxes to ensure they meet quality standards and specifications.
  • · To advice and guide the Production in all aspect on products quality standard for the production process. ...
Posted
a month ago

Singapore

Posted
a month ago

Malaysia

  • Root Cause Analysis & Corrective Actions
  • Drive robust 8D investigations, containment activities, and deviation management to ensure effective Root Cause Corrective Actions (RCCA).
  • Champion technical problem-solving efforts, providing expert guidance and mentorship to lab technicians during failure investigations. ...
Posted
a month ago

Geylang

Posted
a month ago
  • To monitor on each stage of production lines as assign.
  • To work with production team and QC Assistant members to ensure cost effective, high quality & timely delivery of products.
  • Maintain a proper record system on all tested samples for easy retrieval, avoid unintended use and disposed at correct shelf life. ...
Posted
a month ago

Singapore

Posted
a month ago

Singapore

  • Working under general supervision, responsible for performing a wide variety of electro-mechanical assembly operations on assemblies or sub-assemblies.
  • Reads highly complex electro-mechanical diagrams and drawings.
  • Reads basic electro-mechanical schematic diagrams. ...
Posted
a month ago

ASSOCIATION OF PROCESS INDUSTRY

Singapore

Posted
a month ago
  • Implement project quality plans, Inspection & Test Plans (ITPs), and inspection procedures for HV systems.
  • Ensure engineering deliverables and site activities comply with applicable quality standards, customer specifications, and IEC requirements.
  • Support quality risk assessments and ensure mitigation actions are implemented. ...
Posted
a month ago

PROTECH ALLIANCE LLP

Singapore

Posted
a month ago
  • Able to use measuring equipment (eg. CMM, Vision System, hardness tester, roughness tester, roundness tester, tensile strength machine, caliper, micrometer, profile projector, multi-meter & etc) as well as metrology, Geometric Dimensioning & Tolerancing.
Posted
a month ago

HLH HEAT TRANSFER TECHNOLOGY SDN BHD

Teluk Panglima Garang

  • - quality inspection
  • - Documenting test results and quality data
  • - Preparing quality reports ...
Posted
a month ago

Tampoi

  • Monitor and optimize in-process inspection systems and New Product Introduction (NPI) line quality.
  • Perform root cause analysis (CAPA), handle customer complaints, and implement preventive solutions.
  • Ensure compliance with IPC-620 standards, ISO 9001, and ISO 14001, while managing internal/external audits. ...
Posted
a month ago
  • Basic Salary: RM1,900 – RM2,500 per month (excluding overtime)
  • Transport Allowance: RM4.00/day
  • Meal Allowance: RM3.50/day ...
Posted
a month ago

HS Aerosystem Sdn Bhd

  • To perform dimensional measurement and quality inspection for in-process, finished, assembled parts and FA parts according to part drawings and specifications
  • Ensure the document is up to the latest revision before use.
  • To use variety of precision measuring instruments such as CMM, VMM, profilometer, indicators, height gauge, micro-meters and any other inspection gauges. ...
Posted
a month ago

INDUSTRIAL QUALITY MANAGEMENT SDN BHD

  • Conduct inspections on incoming materials, in-process products, and finished products.
  • Perform visual, dimensional, and functional inspections according to established procedures and specifications.
  • Identify, record, and report defects, non-conformities, and quality issues. ...
Posted
a month ago

In-Tech Electronics

  • Perform Inspection & ensure process / line compliance.
  • Daily reporting.
  • Comply to operations control and work procedures related to Environmental and Occupational Safety and Health Management Systems ...
Posted
a month ago

Singapore

Posted
7 days ago
  • Quality Strategy
  • Lead and deliver LOC Quality Objectives and Improvement Plan, using KPI trend analysis to drive continuous improvement.
  • Maintain strong QMS knowledge and monitor commercial changes to identify opportunities and mitigate business risks. ...
Posted
a month ago
  • Support day-to-day lab operations for material analysis, DPA/CDPA, and FA activities.
  • Handle sample logging, labeling, tracking, and storage in accordance with lab procedures.
  • Perform basic sample preparation tasks such as mounting, grinding, polishing, cleaning, and de-capsulation under supervision. ...
Posted
a month ago

Singapore

  • In charge of managing daily production, capacity planning and machine optimization.
  • In charge of leading and motivating the production team to meet schedules for the various operations supporting customer requirements.
  • Responsible for maintaining a safe, organized and clean work environment by setting and driving 6S standard. ...
Posted
a month ago