Rf Engineer Jobs in Pulau Pinang - August 2026 - Urgent Hiring

Showing 38 jobs results for "rf engineer" in Pulau Pinang
Never miss any updates for Rf Engineer jobs in Pulau Pinang
Chat Available
MYR10,500 - MYR16,500 Per Month

George Town, Pulau Pinang

  • Design, develop, test, and debug FPGA/RTL solutions for new products and systems through the full product life cycle from customer/market requirement definition through release and post-release support.
  • Work closely with cross-functional teams (hardware, firmware/software, validation) to ensure FPGA implementation meets product specifications, functionality, and performance requirements.
  • Define and document design architecture, module interfaces, and verification/test approaches; contribute to product specifications and validation plans. ...

Be an early applicant!

Posted
13 days ago
Chat Available
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
  • Develop new products based on customer requirements
  • Review technical drawings and specifications
  • Prepare product BOM and technical documents ...
Posted
17 days ago
Chat Available
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
  • Develop new products based on customer requirements
  • Review technical drawings and specifications
  • Prepare product BOM and technical documents ...
Posted
17 days ago
Chat Available
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
  • Develop new products based on customer requirements
  • Review technical drawings and specifications
  • Prepare product BOM and technical documents ...
Posted
17 days ago
MYR4,000 - MYR4,000 Per Month
  • Flexible schedule
  • Free parking
  • Health insurance ...
Posted
9 days ago
MYR2,500 - MYR3,000 Per Month
  • Flexible schedule
  • Free parking
  • Health insurance ...
Posted
8 days ago
Undisclosed

George Town

  • Support & Lead RF semiconductor product engineering activities throughout NPI to production stages
  • Analyze electrical test data, yield performance, pareto trends, and reliability results
  • Support failure analysis, debug activities, and engineering investigations ...
Posted
11 days ago
Undisclosed
  • Lead RF test development for NPI programs from early sample stage through mass production release, covering AMW and SIP product lines
  • Collaborate closely with RF design, product engineering, and operations teams to drive NPI milestones through Final Production Release
  • Develop and optimize RF ATE programs and test hardware for production and characterization testing – including Advantest V93K RFIM6/RFIM18, and other rack-and-stack RF test platforms ...
Posted
17 days ago
Undisclosed
  • Lead redesign activities for End-of-Life (EOL) components in RF Test & Measurement products to extend product lifecycle, maintain product availability, and support continued business growth.
  • Redesign and validate circuits across analog, power supply, RF, and microwave domains, including both discrete and IC-based designs.
  • Evaluate and qualify alternative components while minimizing impact to hardware architecture, software functionality, and product calibration requirements. ...
Posted
12 days ago
Undisclosed
  • sIdentify new product opportunities based on customer applications; conduct VOC sessions and collaborate with Product Management to define new product requirements
  • .Translate new technologies into customer solutions and drive projects with internal teams to achieve wins
  • .Master existing product portfolios and relevant industry standards (e.g., IEC, UL). Handle technical complaints and work with engineering/quality teams on resolutions ...
Posted
19 days ago
Undisclosed

Malaysia

  • Responsible for mechanical / HVAC system.
  • Responsible for operation & maintenance, ensure uninterrupted supply to production.
  • Responsible for document management related to mechanical / HVAC system. ...
Posted
6 days ago
Undisclosed

Malaysia

  • Work closely with radio frequency (RF) circuit designers to iterate circuit layouts to achieve performance.
  • Perform critical circuit block, subsystem and top-level layout and verification using state-of-the art tools (Cadence Virtuoso--VXL &Mentor Calibre) and RF/Analog layout techniques.
  • Participate in layout design of RF circuits (block/IP/chip) floor planning from scratch, performing routing & layout verification and resolve violations. ...
Posted
3 days ago
Undisclosed

George Town

  • Participate in new product development and project design change for global products.
  • Participate and provide independent oversight on project/ design changes deliverables; review and ensure that project/validation documents comply to regulatory requirements and quality.
  • Handle change control, especially be the expert in process validation for global products. ...
Posted
11 days ago
Undisclosed

George Town

  • Participate in new product development and project design change for global products.
  • Participate and provide independent oversight on project/ design changes deliverables; review and ensure that project/validation documents comply to regulatory requirements and quality.
  • Handle change control, especially be the expert in process validation for global products. ...
Posted
11 days ago

Agensi Pekerjaan Inter Island Sdn Bhd

MYR15,000 - MYR15,000 Per Month
  • Lead the design and development of RF hardware and instrumentation for semiconductor ATE platforms.
  • Design, simulate, and optimize RF circuits to achieve high-performance and reliable hardware solutions.
  • Review PCB layouts with emphasis on RF routing, grounding, shielding, impedance matching, and signal integrity. ...
Posted
24 days ago
Undisclosed

Malaysia

  • Work closely with radio frequency (RF) circuit designers to iterate circuit layouts to achieve performance.
  • Perform critical circuit block, subsystem and top-level layout and verification using state-of-the art tools (Cadence Virtuoso--VXL &Mentor Calibre) and RF/Analog layout techniques.
  • Participate in layout design of RF circuits (block/IP/chip) floor planning from scratch, performing routing & layout verification and resolve violations. ...
Posted
24 days ago
Undisclosed
  • Lead RF hardware design and technical direction for new product development.
  • Design and develop RF circuits, including schematic design, simulation, and optimization.
  • Review RF PCB layouts focusing on signal integrity, grounding, routing, and shielding. ...
Posted
24 days ago

EPS Ventures Sdn Bhd

MYR5,000 - MYR7,000 Per Month

Malaysia

  • Design, develop and implement a new and existing electrical control system
  • Develop and debug PLC ladder diagram
  • Code, test, debug to enhance and initiate efficient program execution and performance and ultimately to reach optimum hardware utilisation ...
Posted
11 days ago
Undisclosed
  • Work and interact with a wide variety of NI staff in R&D software and hardware organizations, as well as employees from other business groups, both in Austin, Texas, and in Debrecen, Hungary
  • Perform research as required to develop or enhance your test solutions.
  • Specify, design, test, and deploy automated test solutions for the manufacture of computer-based instruments ...
Posted
6 days ago
Undisclosed
  • Work and interact with a wide variety of NI staff in R&D software and hardware organizations, as well as employees from other business groups, both in Austin, Texas and in Debrecen, Hungary
  • Perform research as required to develop or enhance your test solutions.
  • Specify, design, test, and deploy automated test solutions for the manufacture of computer-based instruments ...
Posted
6 days ago
Undisclosed
  • Works with the project design team to understand design requirements, to meet the project objectives for FPGA subsystems and interconnections.
  • Evaluates and selects suitable FPGA solutions with optimized speed, size and cost to meet the design requirements.
  • Develops FPGA codes, perform simulation/synthesis and implement the FPGA hardware solution into the electronic system ...
Posted
25 days ago

Avient Corporation

Undisclosed

George Town

  • Perform color matching / application operation and testing in the laboratory
  • QC sample before dispatching out to customer
  • Assists in preparing samples for customers and documentation for sample dispatch ...
Posted
18 days ago
Undisclosed
  • Lead and manage a team of technician and take ownership on the overall operational health and integrity of the RODl Water and Wastewater Treatment system (herein called Water Treatment)
  • Maintain, operate all RODI and Water Treatment systems, associated equipment, electrical/control equipment, plumbing systems, building related system and equipment repairs
  • Manage RODI and Water Treatment capacity and design changes according to the requirements from manufacturing/customers ...
Posted
4 days ago

Keysight Technologies, Inc.

Undisclosed
  • Software Development: Design, develop, and maintain software applications, following best practices and ensuring high-quality code.
  • Instrument Integration: Integrate software with instruments, ensuring compatibility and reliability.
  • Instrument Libraries and Plugins: Develop instrument libraries and OpenTAP plugins, with a focus on user usability. ...
Posted
23 days ago
Undisclosed
  • Lead and manage a team of technician and take ownership on the overall operational health and integrity of the RODl Water and Wastewater Treatment system (herein called Water Treatment)
  • Maintain, operate all RODI and Water Treatment systems, associated equipment, electrical/control equipment, plumbing systems, building related system and equipment repairs
  • Manage RODI and Water Treatment capacity and design changes according to the requirements from manufacturing/customers ...
Posted
25 days ago
Undisclosed

Malaysia

  • Machine troubleshooting and perform preventive maintenance.
  • Documents (FMEA/Training material /SOP/WI) generation, update and preventive maintenance.
  • Line abnormal, quality issue, yield loss investigation and in time action taken. ...
Posted
3 days ago
Undisclosed

Malaysia

  • Machine troubleshooting and perform preventive maintenance.
  • Documents (FMEA/Training material /SOP/WI) generation, update and preventive maintenance.
  • Line abnormal, quality issue, yield loss investigation and in time action taken. ...
Posted
15 days ago
Undisclosed

Malaysia

  • Lead the design, development and implementation of technical solutions for BIOS/system firmware. Participate in project planning and scheduling.
  • Provide technical leadership and direction to a team of engineers. May be a recognized expert (go-to person) in BIOS or other platform technical areas.
  • Review, interpret and may negotiate customer BIOS requirements/specifications, provide customer feedback, and ensure quality of deliverables. ...
Posted
17 days ago
Undisclosed
  • Candidate must possess at least a Bachelor's Degree or Master's in Engineering (Electrical/Electronic) or equivalent
  • Candidate who loves to work with FPGA and proficient in Altera Quartus II or Xilinx Vivado software tools
  • Experienced in intense FPGA development and proficient in ModelSim is a huge advantage ...
Posted
15 hours ago
Undisclosed

Malaysia

  • Manage production support engineering for specific products or product families after transfer from design to high-volume manufacturing.
  • Interface with design, process, test, and reliability engineering teams to identify and resolve technical issues.
  • Sustain and improve existing products through cost reduction initiatives and yield enhancement. ...
Posted
18 days ago

Job searches related to “Rf Engineer”