Technical Jobs in Shah Alam - October 2026 - Urgent Hiring
Showing 464 jobs results for
"technical"
in Shah Alam
MYR5,000 - MYR6,000 Per Month
- Create Bills of Materials, Process Routings and Work Orders
- Supplier and sub-contractor selection and commercial negotiation
- Plan production Work Orders with the aim of achieving customer due dates ...
Be an early applicant!
Posted
a month ago
MYR5,000 - MYR6,000 Per Month
- Create Bills of Materials, Process Routings and Work Orders
- Supplier and sub-contractor selection and commercial negotiation
- Plan production Work Orders with the aim of achieving customer due dates ...
Be an early applicant!
Posted
a month ago
MYR5,000 - MYR6,000 Per Month
- Create Bills of Materials, Process Routings and Work Orders
- Supplier and sub-contractor selection and commercial negotiation
- Plan production Work Orders with the aim of achieving customer due dates ...
Be an early applicant!
Posted
a month ago
Undisclosed
Fresh Graduates
- Assemble and/or repair product assemblies and components by following work orders, engineering drawings, standard operating procedures (SOPs), and verbal instructions.
- Perform manufacturing processes such as bending, tacking, welding, tweaking, leak testing, and component assembly in accordance with approved specifications.
- Operate production equipment, test fixtures, electronic measuring instruments, and leak detection equipment safely and effectively. ...
• Minimum SPM qualification or equivalent technical qualification.
• Previous experience in a cleanroom or manufacturing environment.
+10
Posted
a month ago
Undisclosed
Fresh Graduates
- Assemble and/or repair product assemblies and components by following work orders, engineering drawings, standard operating procedures (SOPs), and verbal instructions.
- Perform manufacturing processes such as bending, tacking, welding, tweaking, leak testing, and component assembly in accordance with approved specifications.
- Operate production equipment, test fixtures, electronic measuring instruments, and leak detection equipment safely and effectively. ...
• Minimum SPM qualification or equivalent technical qualification.
• Previous experience in a cleanroom or manufacturing environment.
+10
Posted
a month ago
Undisclosed
Fresh Graduates
- Assemble and/or repair product assemblies and components by following work orders, engineering drawings, standard operating procedures (SOPs), and verbal instructions.
- Perform manufacturing processes such as bending, tacking, welding, tweaking, leak testing, and component assembly in accordance with approved specifications.
- Operate production equipment, test fixtures, electronic measuring instruments, and leak detection equipment safely and effectively. ...
• Minimum SPM qualification or equivalent technical qualification.
• Previous experience in a cleanroom or manufacturing environment.
+10
Posted
a month ago
Undisclosed
Fresh Graduates
- Perform TIG (GTAW) welding on stainless steel components, weldments, and assemblies according to approved welding procedures and work instructions.
- Read and interpret engineering drawings, blueprints, welding symbols, and specifications.
- Prepare materials for welding, including cleaning, fitting, alignment, and joint preparation. ...
Be an early applicant!
Posted
a month ago
Undisclosed
Fresh Graduates
- Perform TIG (GTAW) welding on stainless steel components, weldments, and assemblies according to approved welding procedures and work instructions.
- Read and interpret engineering drawings, blueprints, welding symbols, and specifications.
- Prepare materials for welding, including cleaning, fitting, alignment, and joint preparation. ...
Be an early applicant!
Posted
a month ago
Undisclosed
Fresh Graduates
- Perform TIG (GTAW) welding on stainless steel components, weldments, and assemblies according to approved welding procedures and work instructions.
- Read and interpret engineering drawings, blueprints, welding symbols, and specifications.
- Prepare materials for welding, including cleaning, fitting, alignment, and joint preparation. ...
Be an early applicant!
Posted
a month ago
Undisclosed
Fresh Graduates
- Perform TIG (GTAW) welding on stainless steel components, weldments, and assemblies according to approved welding procedures and work instructions.
- Read and interpret engineering drawings, blueprints, welding symbols, and specifications.
- Prepare materials for welding, including cleaning, fitting, alignment, and joint preparation. ...
Be an early applicant!
Posted
a month ago
Undisclosed
Fresh Graduates
- Assemble and/or repair product assemblies and components by following work orders, engineering drawings, standard operating procedures (SOPs), and verbal instructions.
- Perform manufacturing processes such as bending, tacking, welding, tweaking, leak testing, and component assembly in accordance with approved specifications.
- Operate production equipment, test fixtures, electronic measuring instruments, and leak detection equipment safely and effectively. ...
• Minimum SPM qualification or equivalent technical qualification.
• Previous experience in a cleanroom or manufacturing environment.
+10
Posted
a month ago
MYR2,500 - MYR4,000 Per Month
- Perform installation, maintenance, inspection, and repair of equipment and technical systems at project sites.
- Troubleshoot technical issues and carry out necessary repairs to ensure smooth operations.
- Assist with scaffolding-related technical work and ensure equipment is properly installed and maintained. ...
Posted
a month ago
MYR5,000 - MYR6,000 Per Month
- Create Bills of Materials, Process Routings and Work Orders
- Supplier and sub-contractor selection and commercial negotiation
- Plan production Work Orders with the aim of achieving customer due dates ...
Be an early applicant!
Posted
a month ago
Undisclosed
Fresh Graduates
- Assemble and/or repair product assemblies and components by following work orders, engineering drawings, standard operating procedures (SOPs), and verbal instructions.
- Perform manufacturing processes such as bending, tacking, welding, tweaking, leak testing, and component assembly in accordance with approved specifications.
- Operate production equipment, test fixtures, electronic measuring instruments, and leak detection equipment safely and effectively. ...
• Minimum SPM qualification or equivalent technical qualification.
• Previous experience in a cleanroom or manufacturing environment.
+10
Posted
a month ago
Undisclosed
Fresh Graduates
- Perform TIG (GTAW) welding on stainless steel components, weldments, and assemblies according to approved welding procedures and work instructions.
- Read and interpret engineering drawings, blueprints, welding symbols, and specifications.
- Prepare materials for welding, including cleaning, fitting, alignment, and joint preparation. ...
Posted
a month ago
Undisclosed
+Additional Compensation
Fresh Graduates
- Operate electropolishing machines and related equipment safely and efficiently.
- Prepare metal parts for electropolishing process, including cleaning and inspection.
- Monitor chemical concentration, temperature, voltage, and process timing. ...
Posted
a month ago
Undisclosed
Fresh Graduates
- Perform TIG (GTAW) welding on stainless steel components, weldments, and assemblies according to approved welding procedures and work instructions.
- Read and interpret engineering drawings, blueprints, welding symbols, and specifications.
- Prepare materials for welding, including cleaning, fitting, alignment, and joint preparation. ...
Be an early applicant!
Posted
a month ago
MYR5,000 - MYR6,000 Per Month
- Create Bills of Materials, Process Routings and Work Orders
- Supplier and sub-contractor selection and commercial negotiation
- Plan production Work Orders with the aim of achieving customer due dates ...
Be an early applicant!
Posted
a month ago
Undisclosed
+Additional Compensation
Fresh Graduates
- Operate electropolishing machines and related equipment safely and efficiently.
- Prepare metal parts for electropolishing process, including cleaning and inspection.
- Monitor chemical concentration, temperature, voltage, and process timing. ...
Posted
a month ago
Undisclosed
Fresh Graduates
- Perform TIG (GTAW) welding on stainless steel components, weldments, and assemblies according to approved welding procedures and work instructions.
- Read and interpret engineering drawings, blueprints, welding symbols, and specifications.
- Prepare materials for welding, including cleaning, fitting, alignment, and joint preparation. ...
Be an early applicant!
Posted
a month ago
MYR3,800 - MYR4,500 Per Month
- Perform servicing and repairs to ensure equipment is functioning properly.
- Install products according to company standards and customer requirements.
- Provide technical support to customers and assist in resolving technical issues. ...
Posted
2 months ago
MYR3,800 - MYR4,500 Per Month
- Perform servicing and repairs to ensure equipment is functioning properly.
- Install products according to company standards and customer requirements.
- Provide technical support to customers and assist in resolving technical issues. ...
Posted
2 months ago
MYR3,500 - MYR6,500 Per Month
- Prepare technical drawings across all project phases, including Tender, Preliminary, Detailed Design, and Construction stages.
- Develop, update, and modify schematic, shop, and as-built drawings based on latest engineering data and site changes.
- Prepare complete drawing packages and documentation for statutory authority submissions. ...
Posted
a month ago
Undisclosed
- Costing Estimation Engineer: Determining best production method based on engineering drawings. Estimate production timing for various process like 3 and 5 axis CNC milling, CNC lathe, Mill-turn and Wire-EDM. Continuously improvement to optimize production methods and costing.
- CAM Programming Engineer: Create CAM programs for complex parts for 3 axis CNC milling and CNC Lathe. You are responsible for the selection of the best tool path, cutting tools and cutting strategies. You will design your own production jigs.
- New Product Introduction Engineer: Be project manager for implementation of new products in our production. Determine all production specifications for a new product. Liaise with customers if specs are not clear. Confirm production process with engineers from other departments and source processes from outside suppliers if not available within our company. Manage a successful implementation of new products. ...
Posted
2 months ago
Undisclosed
- Costing Estimation Engineer: Determining best production method based on engineering drawings. Estimate production timing for various process like 3 and 5 axis CNC milling, CNC lathe, Mill-turn and Wire-EDM. Continuously improvement to optimize production methods and costing.
- CAM Programming Engineer: Create CAM programs for complex parts for 3 axis CNC milling and CNC Lathe. You are responsible for the selection of the best tool path, cutting tools and cutting strategies. You will design your own production jigs.
- New Product Introduction Engineer: Be project manager for implementation of new products in our production. Determine all production specifications for a new product. Liaise with customers if specs are not clear. Confirm production process with engineers from other departments and source processes from outside suppliers if not available within our company. Manage a successful implementation of new products. ...
Posted
2 months ago
MYR2,000 - MYR2,200 Per Month
Near Train Station
- Perform manual deburring on small-sized components and precision parts.
- Use microscopes and fine hand tools to remove burrs and sharp edges.
- Inspect parts to ensure compliance with engineering drawings and quality standards. ...
Posted
2 months ago
MYR2,000 - MYR2,200 Per Month
Near Train Station
- Perform manual deburring on small-sized components and precision parts.
- Use microscopes and fine hand tools to remove burrs and sharp edges.
- Inspect parts to ensure compliance with engineering drawings and quality standards. ...
Posted
2 months ago
MYR6,000 - MYR8,000 Per Month
- Develop and execute sales strategies to promote Fall Protection and PPE products (3M & Scott Safety) to achieve sales targets within the designated territory.
- Identify and pursue new business opportunities by prospecting, networking, and building relationships with potential customers in various industries.
- Conduct product demonstrations, presentations, and training sessions to educate customers on the features, benefits, and proper usage of Fall Protection and PPE products. ...
Posted
a month ago
Undisclosed
- Costing Estimation Engineer: Determining best production method based on engineering drawings. Estimate production timing for various process like 3 and 5 axis CNC milling, CNC lathe, Mill-turn and Wire-EDM. Continuously improvement to optimize production methods and costing.
- CAM Programming Engineer: Create CAM programs for complex parts for 3 axis CNC milling and CNC Lathe. You are responsible for the selection of the best tool path, cutting tools and cutting strategies. You will design your own production jigs.
- New Product Introduction Engineer: Be project manager for implementation of new products in our production. Determine all production specifications for a new product. Liaise with customers if specs are not clear. Confirm production process with engineers from other departments and source processes from outside suppliers if not available within our company. Manage a successful implementation of new products. ...
Posted
2 months ago
MYR2,000 - MYR2,200 Per Month
Fresh Graduates
Near Train Station
- Tool Preparation
- • Prepare cutting tools according to setup sheet, tool list, and machining program requirements.
- • Assemble tool holders, inserts, cutters, drills, taps, and other tooling components. ...
Posted
2 months ago