Test Engineering Jobs in Bayan Lepas - August 2026 - Urgent Hiring

Showing 72 jobs results for "test engineering" in Bayan Lepas
Never miss any updates for Test Engineering jobs in Bayan Lepas
Chat Available
MYR2,200 - MYR5,500 Per Month
+Additional Compensation
Fresh Graduates
  • As a Manufacturing Technician, you will be responsible for supporting production operations and ensuring the smooth functioning of manufacturing equipment and processes. Key responsibilities include:
  • Performing installation, maintenance, repair, and technical support for manufacturing equipment.
  • Supporting production processes through product testing, troubleshooting, and technical analysis. ...
Electronics Electrical Engineering
+2

Be an early applicant!

Posted
7 days ago
Chat Available
Undisclosed
  • Design component-level circuits for precision parametric measurement and dynamic signal analysis
  • Develop automated test system software for analog and mixed-signal integrated circuits
  • Participate in all phases of product development including: ...

Be an early applicant!

Posted
25 days ago
Chat Available
MYR2,500 - MYR3,300 Per Month
  • Conduct functional testing on electronic module samples, including measurement of parameters such as Output Motor (V), Cut-off Output Current (A), and Cut-off Timing (S)
  • Perform AM2 measurements, including analysis of Energy Curves and Spike Curves
  • Support flashing of software into electronic module devices ...
Electrical Engineering Electronics Engineering
+1

Be an early applicant!

Posted
21 days ago
Chat Available
MYR3,000 - MYR6,000 Per Month
  • Perform inspection and verification of incoming raw materials, components, and parts to ensure compliance with specifications and quality standards.
  • Work closely with suppliers to address incoming quality issues and drive continuous improvement.
  • Support supplier quality activities including supplier audits and corrective actions. ...

Be an early applicant!

Posted
6 days ago
Chat Available
Undisclosed
  • Set up and sustain physical, electrical, chemical failure analysis equipment and operation such as SIMS, optical microscope, SEM/FIB/TEM with EDX, AFM, u-PL tools according project timeline and department KPI.Define methodology, perform routine/advanced sample preparation and failure analysis with resources management when applicable for FA requests (e.g. from new product introduction, production failures, yield improvement, reliability failures, and customer returns, these may include technical consultancy, failure analysis report writing and review).Plan and improve failure analysis capability and capacity continuously.Continually improve Failure Analysis works to ensure its efficiency and compliance.Sustain laboratory activities and actively provide technical advice and guidance to FA technicians in a systematic way.Ensure compliance (e.g. 5S, safety, ESD, cost compliance, radiation protection, laser protection, passing audit and deviation correction).Foster collaboration and positive culture.Perform other tasks as required by superiors and act as proxy as necessary.
Posted
13 days ago
premium banner
MYR5,000 - MYR8,000 Per Month
  • Lead and manage projects from initiation to closure, ensuring successful delivery within defined scope, budget, and timeline.
  • Develop and maintain project plans, including defining project objectives, deliverables, and milestones.
  • Collaborate with stakeholders to gather project requirements and translate them into actionable project plans. ...
Project Management Coordination
+5
Posted
2 days ago
MYR8,000 - MYR10,000 Per Month
  • Analyze technology development trends in the optical module industry, including CPO, LPO, silicon photonics, andrelated advanced technologies.
  • Develop the company’s medium- and long-term technology roadmap for optical module automation equipment.
  • Lead preliminary research and introduction of new technologies and new processes. ...
Automation Technical Knowledge
+6

Be an early applicant!

Posted
a month ago
MYR8,000 - MYR10,000 Per Month
  • Lead the development of system architecture for automation equipment and production line solutions.
  • Convert customer requirements, URS, process needs, and technical specifications into practical system-level designs.
  • Define equipment functions, process flow, machine layout, module interfaces, control logic, data flow, and integration requirements. ...
Technical Knowledge Risk Management
+11
Posted
a month ago
Chat Available
MYR3,000 - MYR4,000 Per Month
  • To operate complex equipment and analytical tools in ESD environment.
  • Operating and using Central Lab support, Package and Physical FA techniques; BKM to satisfy all FA need.
  • Taking up the responsibilities of equipment ownership, development and proliferation to users if identified. ...

Be an early applicant!

Posted
18 days ago
Undisclosed
  • Set up, troubleshoot, and recover complex downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems, with minimal supervision.
  • Proven experience leading and supporting Continuous Improvement Projects (CIP) to improve equipment performance, reduce downtime, enhance OEE, and optimize manufacturing processes.
  • Troubleshoot and resolve Testcell yield issues to maintain product quality, throughput, and equipment stability. ...
Posted
3 days ago
Undisclosed
  • Set up, troubleshoot, and recover complex downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems, with minimal supervision.
  • Proven experience leading and supporting Continuous Improvement Projects (CIP) to improve equipment performance, reduce downtime, enhance OEE, and optimize manufacturing processes.
  • Troubleshoot and resolve Testcell yield issues to maintain product quality, throughput, and equipment stability. ...
Posted
24 days ago
Undisclosed
  • Set up, troubleshoot, and recover complex downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems, with minimal supervision.
  • Proven experience leading and supporting Continuous Improvement Projects (CIP) to improve equipment performance, reduce downtime, enhance OEE, and optimize manufacturing processes.
  • Troubleshoot and resolve Testcell yield issues to maintain product quality, throughput, and equipment stability. ...
Posted
25 days ago
Undisclosed
  • Set up, troubleshoot, and recover complex downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems, with minimal supervision.
  • Proven experience leading and supporting Continuous Improvement Projects (CIP) to improve equipment performance, reduce downtime, enhance OEE, and optimize manufacturing processes.
  • Troubleshoot and resolve Testcell yield issues to maintain product quality, throughput, and equipment stability. ...
Posted
25 days ago
Undisclosed
  • Drive engineering performance across yield, utilization, quality, cost and delivery through structured improvement programs.
  • Establish and manage KPIs and performance metrics, partnering cross-functionally to ensure execution and results.
  • Collaborate with Planning and Manufacturing to meet production, cost and delivery targets. ...
Posted
25 days ago

IN-TECH ELECTRONICS

MYR3,400 - MYR4,500 Per Month
  • Support both new product introduction (NPI) and sustaining product, internal product transfer and setup, engineering change activities that include product testing and evaluations for all test-engineering processes.
  • Develop product test procedure, method, and tools.
  • Ensure new equipment and tester is properly qualified, calibrated and maintained according to corresponding procedures. ...
Posted
10 days ago

In-Tech Electronics

MYR3,400 - MYR4,500 Per Month
  • Support both new product introduction (NPI) and sustaining product, internal product transfer and setup, engineering change activities that include product testing and evaluations for all test-engineering processes.
  • Develop product test procedure, method, and tools.
  • Ensure new equipment and tester is properly qualified, calibrated and maintained according to corresponding procedures. ...
Posted
10 days ago
Undisclosed
  • To track project budget and ensure equipment cost within the planed budget.
  • On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
  • Release the test system according to Test System Release Procedure. ...
Posted
13 days ago
Undisclosed
  • Lead the development and debug of test programs for product validation and characterization
  • Perform in-depth data analysis of test results to identify failure modes, trends, and opportunities for test optimization
  • Own test hardware setup, maintenance, and troubleshooting of automated test equipment (ATE) ...
Posted
2 days ago
Undisclosed
  • Full test transfer to Reliability testing environment including test support during REL for all test solutions in the SP NPI team.
  • Develop characterization and production final test solutions for System Protection NPI products
  • Design test hardware, software, and debug each ...
Posted
11 days ago
Undisclosed
  • Execute Radio Frequency Performance Test Cases for 2G/3G/4G/5G/BT/Wi-Fi Products.
  • Execute power consumption, audio, EMC, signal integrity test cases.
  • Execute the use case testing for the producible categories of 2G/3G/4G/5G/BT/WIFI product. ...
Posted
12 days ago

Iotronix Technologies Sdn Bhd

MYR2,000 - MYR3,500 Per Month
  • Opportunities for promotion
  • Do you have experience working for a PCBA company?
  • How many years of experience do you have with debugging? ...
Posted
20 days ago
Undisclosed
  • Work and interact with a wide variety of NI staff in R&D software and hardware organizations, as well as employees from other business groups, in Austin, Texas, Debrecen, Hungary and Penang, Malaysia.
  • Validate automated test solutions (using Gage R & R, as well as other methods) for the manufacture of test and measurements instruments and hold required reviews to assure test system readiness for product release.
  • Full ownership of test solutions after deployment on production floor. Ensure test solutions owned are in good condition and readily available for NI Operations and Services. ...
Posted
3 days ago
Undisclosed
  • Test Strategy and Planning: Develop and implement comprehensive test strategies and plans for new products or features, considering various testing methodologies and tools.
  • Test Case Design and Execution: Design, develop, and execute test cases covering functional, performance, reliability, and compatibility aspects.
  • Test Automation: Design and implement automated test scripts to improve efficiency, reduce manual effort, and ensure consistent test coverage. ...
Posted
3 days ago
MYR2,000 - MYR3,000 Per Month
  • Machinery & Equipment: Support multi-discipline manufacturing processes with respect to the repair, maintenance, installation and/or enhancement of a select group of machinery and equipment or interrelated systems.
  • Process/Product/Production: Provides technical support in the area of electronic or mechanical operations, tests, experiments and/or problem resolution associated with components, parts, products or processes/systems.
  • Test & Repair: Tests and calibrates and/or repairs and monitors and/or installs and diagnoses equipment, systems, and/or assemblies. Works from guidelines and standardized procedures/instructions. May design/build tools. ...
Posted
6 days ago
Undisclosed
  • Perform product testing, including data collection and analysis, to ensure product quality and reliability.
  • Conduct programming tasks, such as interpreting methodology and contributing to process improvements.
  • Debug and troubleshoot test systems to identify and resolve issues promptly. ...
Posted
7 days ago
Undisclosed
  • Responsible for support of Magnum Testers NPI and High-Volume-Manufacturing Operations issues.
  • Drive and facilitate Magnum testers production, yield, and reliability improvement.
  • Support US team on new product transfer, part qualification work, and software validation work. ...
Posted
9 days ago
Undisclosed
  • Work and interact with a wide variety of NI staff in R&D software and hardware organizations, as well as employees from other business groups, in Austin, Texas, Debrecen, Hungary and Penang, Malaysia.
  • Validate automated test solutions (using Gage R & R, as well as other methods) for the manufacture of test and measurements instruments and hold required reviews to assure test system readiness for product release.
  • Full ownership of test solutions after deployment on production floor. Ensure test solutions owned are in good condition and readily available for NI Operations and Services. ...
Posted
14 days ago
Undisclosed
  • Lead the development and debug of test programs for product validation and characterization
  • Perform in-depth data analysis of test results to identify failure modes, trends, and opportunities for test optimization
  • Own test hardware setup, maintenance, and troubleshooting of automated test equipment (ATE) ...
Posted
23 days ago
Undisclosed
  • Work and interact with a wide variety of NI staff in R&D software and hardware organizations, as well as employees from other business groups, both in Austin, Texas, and in Debrecen, Hungary
  • Perform research as required to develop or enhance your test solutions.
  • Specify, design, test, and deploy automated test solutions for the manufacture of computer-based instruments ...
Posted
14 days ago
Undisclosed
  • Work and interact with a wide variety of NI staff in R&D software and hardware organizations, as well as employees from other business groups, both in Austin, Texas and in Debrecen, Hungary
  • Perform research as required to develop or enhance your test solutions.
  • Specify, design, test, and deploy automated test solutions for the manufacture of computer-based instruments ...
Posted
14 days ago