Jawatan Kosong Minimum 2 Years Experience di Bayan Lepas - September 2026
Paparan 121 hasil carian kerja kosong untuk
"minimum 2 years experience"
di Bayan Lepas
Undisclosed
- Candidate must possess Degree in Electronics/Electrical Engineering and Mechanical or equivalent.
- Basic technical knowledge in Electronic/Semiconductors.Familiar with SPC, FMEA, DOE, TPM, OCAP, JMP, RCA, Control Plan, Working Instruction, Predictive Maintenance.
- Job Overview: ...
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Qualification & Experience:
- Diploma in related discipline with min 3 years relevant working experience or ;
- Technical Cert with min 4 years relevant working experience or ; ...
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Minimum qualification is a Diploma in Electronics/Microelectronics.
- The candidate should have Failure Analysis experience in Package or Die level FA or Reliability analysis experience for a minimum of 1 year and above in semiconductor manufacturing related company.
- Well versed in using FA & Rel related equipment such as Microscope, Parametric Analyzer, X-ray, CSAM, SEM-EDX, Decapper, TDR, Micro Prober station, FTIR, HAST, Bake oven, Reflow machine, TC chamber, Burn in oven and etc. ...
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Design new leadframe packages and handle project management.
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Experienced in Wirebond process and able to perform troubleshooting, set-up, conversion and recipe creation.
- Employment Type : Full time
- Fluent in English, and Bahasa Malaysia.
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Job Overview:
- To carry out daily maintenance and repair for EOL Pkg Saw equipment.
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Diploma in Electrical/Electronics/Mechanical Engineering.
- Basic knowledge in Molding process (Hydraulic and servo system,)
- Able to read schematic diagram. ...
Jadilah pemohon terawal!
Posted
a month ago
MYR3,000 - MYR3,600 Sebulan
- Familiarity with material analysis techniquessuch asFTIR, XPS, and ToF-SIMS is an advantage.
- Bachelor’s degree or higher in Material Science, Physics, Mechanical, or Chemical Engineering, or equivalent.
- Knowledge of analytical tools such as Parametric Analyzer, Keithley Meter, TDR, EOTPR, SEM/EDX, FIB, FTIR, X-Ray, Acoustic Imaging, and IR Imaging tools. ...
Posted
2 months ago
Undisclosed
- Experienced in Wirebond process and able to perform troubleshooting, set-up, conversion and recipe creation.
- Employment Type : Full time
- Fluent in English, and Bahasa Malaysia.
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Experienced in Wirebond process and able to perform troubleshooting, set-up, conversion and recipe creation.
- Employment Type : Full time
- Fluent in English, and Bahasa Malaysia.
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Experienced in Wirebond process and able to perform troubleshooting, set-up, conversion and recipe creation.
- Employment Type : Full time
- Fluent in English, and Bahasa Malaysia.
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Experienced in Wirebond process and able to perform troubleshooting, set-up, conversion and recipe creation.
- Employment Type : Full time
- Fluent in English, and Bahasa Malaysia.
Jadilah pemohon terawal!
Posted
a month ago
MYR4,000 - MYR6,000 Sebulan
- Boleh membaca Diagram Pneumatik & Skematik Elektrik.
- Boleh melaksanakan pemetuaan motor (motor tuning) & pemeriksaan I/O elektrik.
- Calon mesti mempunyai sekurang-kurangnya Sijil, Diploma, atau Ijazah Sarjana Muda dalam Kejuruteraan Elektrik, Kejuruteraan Mekatronik, Kejuruteraan Automasi, atau bidang yang berkaitan. ...
Jadilah pemohon terawal!
Posted
21 days ago
MYR3,500 - MYR5,000 Sebulan
- Keupayaan untuk membaca dan mentafsir pelan kejuruteraan, lukisan teknikal, dan spesifikasi.
- Pengetahuan yang kukuh tentang alat pemotongan, bahan, dan parameter pemesinan.
- Kemahiran dalam menggunakan alat pengukur ketepatan seperti angkup vernier, mikrometer, dan tolok dail. ...
Jadilah pemohon terawal!
Posted
a month ago
MYR6,000 - MYR7,500 Sebulan
- Keupayaan untuk bekerja secara bebas dan berdisiplin dalam menguruskan projek.
- Pengurusan projek dan kemahiran analitis yang baik.
- 5+ tahun dalam peralatan semikonduktor bahagian hadapan sebagai Jurutera Peralatan Fab, Jurutera Khidmat Pelanggan, atau Jurutera Sokongan Teknikal (syarikat Tahap 1 diutamakan). ...
Good electro-mechanical equipment troubleshooting skills.
Read and orally communicate in Mandarin (writing ability not required).
+3
Jadilah pemohon terawal!
Posted
25 days ago
Undisclosed
- Fresh graduate with degree holder of Bachelor of Science or Engineering.
- NPI and Project Management experiences. Familiar with Semiconductor manufacturing processes.
- Job Overview : ...
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Good knowledge of FMEA, DOE, SPEC and risk analysis.
- Independent with good communication skills and ability to work effectively in a cross functional environment with people at all levels.
- Degree in Mechanical/ Electronics / Electrical /Mechanical Engineering. ...
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Degree in related discipline or Diploma with 3 years related working experience.
- AutoCad application knowledge will be an advantage.
- Job Overview: ...
Jadilah pemohon terawal!
Posted
a month ago
MYR3,500 - MYR4,500 Sebulan
- Strong analytical, communication, and coordination skills.
- Proficient in Microsoft Excel and ERP systems.
- Bachelor’s Degree in Mechanical / Manufacturing / Industrial Engineering or related field. ...
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Additional Desirable Qualifications: Fresh Grad/Min 1 years relevant working experience in semiconductor / Electronics manufacturing environment.
- Job Overview:
- Responsible for supporting encap production line include Pre-Encap Plasma – Encap cure process. Responsible for any product yield and machine downtime related issue with regards to equipment, maintenance, product and process.
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Fresh graduates are encourage to apply.
- Job Overview:
- To provide the most efficient planning and recommendations to support the Operations group in meeting business demand.
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Degree in Electronics / Electrical /Chemical/Mechanical Engineering
- Additional Desirable Qualifications:
- Practical experiences with all the equipment’s in die attach process. ...
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Degree in Electronics / Electrical /Chemical/Mechanical Engineering
- Additional Desirable Qualifications:
- Practical experiences with all the equipment’s in die attach process. ...
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Degree in Electronics / Electrical /Chemical/Mechanical Engineering
- Additional Desirable Qualifications:
- Practical experiences with all the equipment’s in die attach process. ...
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Degree in Electronics / Electrical /Chemical/Mechanical Engineering
- Additional Desirable Qualifications:
- Practical experiences with all the equipment’s in die attach process. ...
Jadilah pemohon terawal!
Posted
a month ago
Undisclosed
- Degree in Electronics / Electrical /Chemical/Mechanical Engineering
- Additional Desirable Qualifications:
- Practical experiences with all the equipment’s in die attach process. ...
Jadilah pemohon terawal!
Posted
a month ago
MYR2,000 - MYR3,500 Sebulan
- Ability to perform basic CNC program editing and offset adjustments.
- Able to read and interpret technical drawings.
- Knowledge of process control to ensure productivity and product quality. ...
Jadilah pemohon terawal!
Posted
a month ago
MYR4,000 - MYR6,000 Sebulan
- Mempunyai pengalaman teknikal dalam bidang mekanikal & elektrikal.
- Kebolehan untuk bekerja secara berdikari dan berdisiplin dalam menguruskan projek.
- Kemahiran pengurusan projek dan analisis yang baik. ...
Posted
21 days ago
Undisclosed
- Identify prolonged issue and implement improvement action
- Maintain tester 5S.
- Helping Sr. Engineer to work on improvement project, data collection and implementation. ...
Posted
21 days ago
Undisclosed
- Experience in Die Attach Process.
- Have equipment or process programming knowledge background.
- Basic communication skills and good learning and feedback ability. ...
Posted
a month ago