Diploma In Engineering Jobs in Pulau Pinang - September 2026 - Urgent Hiring
Showing 67 jobs results for
"diploma in engineering"
in Pulau Pinang
Undisclosed
- Complete mechanical assembly/electrical assembly with guidance by the senior technician, team leader, supervisor and/or engineering, installation and testing of equipment to time deadlines.2. Assemble and integrate a variety of mechanical and electrical assemblies. 3. Obtain and verify kitted (pre-picked) details parts and assemblies were issued correctly by comparing part numbers and quantities to drawing(s).4. Follow oral/written instructions provided by the senior technician, team leader, supervisor and/or engineering to complete assembly tasks.5. Ensure that parts issued are free of visible defects.6. Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean.7. Travel to customer sites and carry out installation, servicing work and training as scheduled.8. Other duties and assignments as instructed by superiors from time to time.9. Perform On Site Customer support assign by the Superior or the management.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
7 days ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- Perform product testing, qualification, and failure analysis to support new product introductions, engineering evaluations, and customer requirements.
- Execute engineering qualification plans including RMA investigations, assembly qualifications, production sampling, and product validation activities.
- Support system-level debugging using diagnostic software, bus analyzers, and engineering test tools. ...
Be an early applicant!
Posted
13 days ago
MYR2,500 - MYR3,500 Per Month
- Set up and operate CNC milling and/or turning machines.
- Process automation products using aluminium and plastic materials.
- Read and interpret engineering drawings. ...
Posted
6 days ago
Undisclosed
- Performing daily, weekly, monthly, and scheduled preventive maintenance activities.
- Performing corrective maintenance and repair work during equipment breakdowns.
- Conducting equipment inspection and identifying abnormal conditions. ...
Be an early applicant!
Posted
13 days ago
Technical Service Engineer (Mandarin Speaker)
MYR2,500 - MYR4,000 Per Month
George Town, Pulau Pinang
- Take charge of assigned products and ensure smooth operations while providing continuous service support.
- Perform installation and commissioning of machines/equipment on-site.
- Carry out preventive maintenance, troubleshooting, and repair of equipment in-house or on-site. ...
Posted
8 days ago
MYR2,100 - MYR2,300 Per Month
Fresh Graduates
- Perform test equipment installation, setup, conversion, and buyoff activities.
- Support equipment transfer, qualification, and readiness for production use.
- Assist in new product introduction (NPI) and manufacturing ramp activities ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR2,800 Per Month
- Assist in machine assembly, installation, testing, and commissioning activities.
- Perform preventive maintenance, servicing, and troubleshooting of machinery and equipment.
- Attend customer sites for installation, maintenance, repair, and technical support. ...
Posted
9 days ago
Quality Assurance (QA) Manager
MYR5,000 - MYR7,000 Per Month
- Lead and manage the Quality Assurance (QA) and Quality Control (QC) team.
- Maintain and improve the company’s Quality Management System (QMS).
- Ensure products meet customer specifications, engineering drawings, and quality requirements. ...
Posted
3 days ago
MYR2,300 - MYR3,500 Per Month
- Perform routine preventive maintenance and troubleshoot equipment failures to minimize downtime.
- Support daily manufacturing operations, including equipment setup and responding to equipment alarms.
- Assist engineers during process adjustments, testing, and production trials. ...
Be an early applicant!
Posted
4 days ago
Marketing & Engineering
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Review customer engineering drawings, specifications and requirements for quotation purposes.
- Understand machining processes such as CNC milling, CNC turning and conventional machining.
- Evaluate drawing requirements including material, dimensions, tolerances, surface finish and special requirements. ...
Posted
4 days ago
Undisclosed
- Responsible to ensure sales objectives and targets are met.2. Communicate and liaise with customers in handling customer enquiries, order processing, product details, agreementpreparation, etc.3. Ensure customer information request, complaints and suggestion are handled promptly and professionally.4. Prepared and processed quotation and sales order.5. Closed monitoring order delivery and ensured customer's payment up-to date.6. Work closely with related department to ensure customer requests are performed accordingly.7. Maintain existing customer base and develop new customers.8. Build and maintain good relationship with customers at all levels.9. Other duties and assignments as instructed by superiors from time to time.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to generalsafety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
7 days ago
Undisclosed
- Oversee or assist superior in coordinating the in-house/on-site assembly & installation of company products.
- Communicate and solve problems with counterparts from other departments to ensure timely coordination of engineering, purchasing and production.
- Be an interface point to customer counterparts for assembly and site installation. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
- Run the machine according to plan.
- Perform preventive maintenance according to plan.
- Inspect product and inform Leader / Superior on product quality issues. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
- Run the machine according to plan.
- Perform preventive maintenance according to plan.
- Inspect product and inform Leader / Superior on product quality issues. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
- To generate the machine program for the machine to run.
- All programs complied with the drawing needed.
- Verify to confirm the program meets the products meeting specification. ...
Be an early applicant!
Posted
7 days ago
MYR2,500 - MYR3,500 Per Month
- Coordinate day-to-day technical and field operations across all assigned sites within the Northern Zone.
- Coordinate technicians and Team Leaders for Installation & Upgrade, Preventive Maintenance, and Testing & Commissioning activities.
- Monitor site activities to ensure works are completed according to project requirements and schedules. ...
Be an early applicant!
Posted
17 days ago
MYR6,000 - MYR8,000 Per Month
George Town, Pulau Pinang
- Develop and maintain PLC software for automation and test systems.
- Build UI/UX interfaces for operators, engineers, and internal users.
- Develop algorithms for control logic, automation sequencing, data handling, and system optimisation. ...
Posted
a month ago
Machinist (Cnc 3 Axis / Wire Cut)
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- To prepare and operate manual & semi-auto machines e.g. milling & grinding machines and CNC machines e.g. CNC multi-axis, Wire Cut & EDM machines.
- To set up machines to complete full cycles to fabricate large number of parts.
- To perform manual tapping and buffing of parts if required. ...
Posted
15 days ago
Undisclosed
- To supervise and lead daily overall engineering department activities.
- To report all engineering related KPI(s) and other management assigned KPI(s) (a) weekly (b) monthly, to departmental HOD and corporate.
- To support Manufacturing Engineers to prepare documentation. ...
Posted
23 days ago
MYR2,000 - MYR2,500 Per Month
George Town, Pulau Pinang
- Perform routine inspections and maintenance on electrical systems, including lighting, power distribution, and control panels, to ensure optimal functionality and safety.
- Conduct diagnostic tests and repairs for plumbing issues, such as leaks, blockages, and fixture malfunctions, ensuring efficient water supply and drainage throughout the facility.
- Troubleshoot and repair HVAC systems, including air conditioning units, heating systems, and ventilation equipment, to maintain comfortable and healthy indoor environments. ...
Be an early applicant!
Posted
6 days ago
MYR3,000 - MYR4,000 Per Month
- To operate complex equipment and analytical tools in ESD environment.
- Operating and using Central Lab support, Package and Physical FA techniques; BKM to satisfy all FA need.
- Taking up the responsibilities of equipment ownership, development and proliferation to users if identified. ...
Posted
2 months ago
Undisclosed
- Assist on mechanical assembly/electrical assembly, installation and testing of equipment to time deadlines.
- Assemble and integrate a variety of mechanical and electrical assemblies.
- Follow oral/written instructions provided by the team leader, supervisor and/or engineering to complete assembly tasks. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
7 days ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
7 days ago
Undisclosed
- Monitor FVI yield performance.
- Support engineer for any FVI & TBE issue including low yield lot.
- Support production line in achieving Quality, Delivery, Cycle Time, and Process Improvement. ...
Posted
a month ago
MYR4,000 - MYR6,000 Per Month
- Responsible for the electrical assembly, wiring, panel integration, testing, and troubleshooting of custom-built automation equipment.
- Assemble and install electrical components into control panels according to electrical schematics and layout drawings.
- Perform control panel wiring, cable routing, labelling, and electrical integration for automation machines. ...
Be an early applicant!
Posted
20 days ago
MYR800 - MYR1,500 Per Month
George Town, Pulau Pinang
- Taking charge of product assigned and ensure smooth running and provides continuous service support.
- Installation and commissioning of machines/equipment on-site.
- Undertake preventive maintenance, troubleshoot and repair equipment in house or on-site. ...
Be an early applicant!
Posted
12 days ago
Undisclosed
- Monitor FVI yield performance.
- Support engineer for any FVI & TBE issue including low yield lot.
- Support production line in achieving Quality, Delivery, Cycle Time, and Process Improvement. ...
Be an early applicant!
Posted
a month ago
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
- Support engineering and production activities.
- Understand customer requirements and provide technical support.
- Work with production and quality teams to solve technical issues. ...
Be an early applicant!
Posted
11 days ago
Undisclosed
- Carry-out daily shiftly routines job as implemented by mold team.
- Responsible for any line issue either equipment or tooling and optimizing trouble-shooting for reducing downtime and waiting time manner
- Prioritize standby support on areas designated by crew leader/superior. ...
Be an early applicant!
Posted
a month ago