Diploma Mechanical Engineering Jobs in Shah Alam - August 2026 - Urgent Hiring
Paparan 34 hasil carian kerja kosong untuk
"diploma mechanical engineering"
di Shah Alam
Boleh Sembang
MYR2,300 - MYR2,500 Sebulan
- Conduct assessment of vehicle condition (interior, exterior, odometer reading, trunk area, engine compartment).
- Note damage, or repair to frame, paint, engine, AC/heater operation, radio, navigation system, tires, etc.
- Provide accurate and complete documentation of overall vehicle condition; providing reports based on findings. ...
Jadilah pemohon terawal!
Posted
7 days ago
Boleh Sembang
MYR3,000 - MYR5,000 Sebulan
- Automation & Control Systems
- Equipment Maintenance & Reliability
- Robotics & Integration Projects ...
Jadilah pemohon terawal!
Posted
7 days ago
Boleh Sembang
Undisclosed
- · Perform stylus calibration and create CMM setup before measurement.
- · Run CMM inspections for FAI, IPQC, and Final QC according to planning and ensure efficient machine utilization.
- · Generate and verify CMM measurement reports. ...
Jadilah pemohon terawal!
Posted
4 days ago
Boleh Sembang
Undisclosed
Graduan Baru
- Tool Preparation
- • Prepare cutting tools according to setup sheet, tool list, and machining program requirements.
- • Assemble tool holders, inserts, cutters, drills, taps, and other tooling components. ...
Jadilah pemohon terawal!
Posted
4 days ago
Boleh Sembang
MYR2,000 - MYR3,000 Sebulan
Dekat Stesen Tren
- Perform routine maintenance and scheduled servicing on iCAUR electric vehicles.
- Diagnose and repair mechanical, electrical, and electronic vehicle systems.
- Conduct vehicle inspections and identify faults using manufacturer diagnostic equipment. ...
Posted
2 days ago
Boleh Sembang
MYR2,000 - MYR2,500 Sebulan
Graduan Baru
Dekat Stesen Tren
- Preventive & Corrective Maintenance
- - Perform regular servicing of food processing machines (e.g., mixers, ovens, conveyors, packaging lines).
- - Identify and repair mechanical or electrical faults in a timely manner. ...
Posted
6 days ago
Boleh Sembang
MYR3,500 - MYR5,000 Sebulan
- Handle Automation & Control Systems
- Perform Equipment Maintenance & Reliability improvement
- Support Robotics & Integration Projects ...
Posted
7 days ago
Parts Assistant (PERODUA 3S CENTER BUKIT RIMAU, S. ALAM)
MYR1,700 - MYR2,000 Sebulan
+Pampasan Tambahan
Graduan Baru
- Maintain up-to-date records of all stock movements to ensure that optimum stock levels are maintained.
- Carry out stock checks to ensure that adequate supplies are maintained and physical and stock record are tallied.
- Reorder stock as required to ensure that the optimum levels of stock are maintained. ...
Posted
8 days ago
Boleh Sembang
Undisclosed
- Maintain cleanliness:Work station - Sweep floors, empty trash bins, wipe down work surface, clear away debris, power wash work areaMachine related - Clean machine parts, dispose grease and sludge into containers, arrange parts according to customer crates/pallets and maintain tools cleanliness
- Organize tools:Return hand and power tools to designated storage racks and areas, report to supervisor if any tools broken or damaged.
- Assist technicians:Hold materials, fetch parts, and support senior team members with basic assemblies. ...
Jadilah pemohon terawal!
Posted
5 days ago
Boleh Sembang
Undisclosed
- Maintain cleanliness:Work station - Sweep floors, empty trash bins, wipe down work surface, clear away debris, power wash work areaMachine related - Clean machine parts, dispose grease and sludge into containers, arrange parts according to customer crates/pallets and maintain tools cleanliness
- Organize tools:Return hand and power tools to designated storage racks and areas, report to supervisor if any tools broken or damaged.
- Assist technicians:Hold materials, fetch parts, and support senior team members with basic assemblies. ...
Jadilah pemohon terawal!
Posted
5 days ago
Senior/Junior CNC Machinist (3/5 Axis Milling, Lathe, Wirecut)/ Grinding Machinist/ Tooling Technician
MYR2,000 - MYR2,500 Sebulan
Graduan Baru
- 5 axis CNC Milling/ 3-axis CNC Milling
- · Independently setup a 5 axis CNC milling/ 3-axis CNC Milling machine for high precision part manufacturing.
- · Run a CNC 5 axis CNC milling machine with +/-0.01mm precision. ...
Posted
a day ago
Boleh Sembang
Undisclosed
- Maintain cleanliness:Work station - Sweep floors, empty trash bins, wipe down work surface, clear away debris, power wash work areaMachine related - Clean machine parts, dispose grease and sludge into containers, arrange parts according to customer crates/pallets and maintain tools cleanliness
- Organize tools:Return hand and power tools to designated storage racks and areas, report to supervisor if any tools broken or damaged.
- Assist technicians:Hold materials, fetch parts, and support senior team members with basic assemblies. ...
Jadilah pemohon terawal!
Posted
5 days ago
Boleh Sembang
MYR2,300 - MYR3,000 Sebulan
- Provide breakdown and preventive maintenance service.
- Work according to schedule as assigned by the scheduler.
- Manage installation, repair, preventive maintenance, and test tasks. ...
Posted
a day ago
Boleh Sembang
MYR3,000 - MYR5,000 Sebulan
Graduan Baru
- Market Development: Identify and reach out to potential B2B clients in the manufacturing sector to expand our market footprint.
- Client Consultations: Conduct client meetings, presentations, on-site visits to factories and production lines to understand clients' requirements and production challenges.
- Technical Support: Collaborate with the technical team to provide basic automation proposals and product specifications tailored to client needs. ...
Posted
25 days ago
Boleh Sembang
MYR3,000 - MYR5,000 Sebulan
Graduan Baru
- Market Development: Identify and reach out to potential B2B clients in the manufacturing sector to expand our market footprint.
- Client Consultations: Conduct client meetings, presentations, on-site visits to factories and production lines to understand clients' requirements and production challenges.
- Technical Support: Collaborate with the technical team to provide basic automation proposals and product specifications tailored to client needs. ...
Posted
25 days ago
Boleh Sembang
MYR3,000 - MYR5,000 Sebulan
Graduan Baru
- Market Development: Identify and reach out to potential B2B clients in the manufacturing sector to expand our market footprint.
- Client Consultations: Conduct client meetings, presentations, on-site visits to factories and production lines to understand clients' requirements and production challenges.
- Technical Support: Collaborate with the technical team to provide basic automation proposals and product specifications tailored to client needs. ...
Posted
25 days ago
Up to MYR600 Sebulan
Graduan Baru
Dekat Stesen Tren
- Assist Site Engineers in supervising and monitoring daily construction activities on site.
- Observe site progress and ensure work is carried out according to approved drawings, specifications, and project schedules.
- Participate in site inspections to monitor workmanship, quality, and compliance with project requirements. ...
Posted
25 days ago
Boleh Sembang
Undisclosed
- · Perform stylus calibration and create CMM setup before measurement.
- · Run CMM inspections for FAI, IPQC, and Final QC according to planning and ensure efficient machine utilization.
- · Generate and verify CMM measurement reports. ...
Jadilah pemohon terawal!
Posted
4 days ago
Boleh Sembang
Undisclosed
- · Perform stylus calibration and create CMM setup before measurement.
- · Run CMM inspections for FAI, IPQC, and Final QC according to planning and ensure efficient machine utilization.
- · Generate and verify CMM measurement reports. ...
Jadilah pemohon terawal!
Posted
4 days ago
Boleh Sembang
Undisclosed
- · Perform stylus calibration and create CMM setup before measurement.
- · Run CMM inspections for FAI, IPQC, and Final QC according to planning and ensure efficient machine utilization.
- · Generate and verify CMM measurement reports. ...
Jadilah pemohon terawal!
Posted
4 days ago
Boleh Sembang
Undisclosed
- · Perform stylus calibration and create CMM setup before measurement.
- · Run CMM inspections for FAI, IPQC, and Final QC according to planning and ensure efficient machine utilization.
- · Generate and verify CMM measurement reports. ...
Jadilah pemohon terawal!
Posted
4 days ago
Boleh Sembang
Undisclosed
- · Perform stylus calibration and create CMM setup before measurement.
- · Run CMM inspections for FAI, IPQC, and Final QC according to planning and ensure efficient machine utilization.
- · Generate and verify CMM measurement reports. ...
Jadilah pemohon terawal!
Posted
4 days ago
Boleh Sembang
Undisclosed
Graduan Baru
- Tool Preparation
- • Prepare cutting tools according to setup sheet, tool list, and machining program requirements.
- • Assemble tool holders, inserts, cutters, drills, taps, and other tooling components. ...
Jadilah pemohon terawal!
Posted
4 days ago
Boleh Sembang
Undisclosed
- · Perform stylus calibration and create CMM setup before measurement.
- · Run CMM inspections for FAI, IPQC, and Final QC according to planning and ensure efficient machine utilization.
- · Generate and verify CMM measurement reports. ...
Jadilah pemohon terawal!
Posted
4 days ago
Boleh Sembang
Undisclosed
Graduan Baru
- Tool Preparation
- • Prepare cutting tools according to setup sheet, tool list, and machining program requirements.
- • Assemble tool holders, inserts, cutters, drills, taps, and other tooling components. ...
Jadilah pemohon terawal!
Posted
4 days ago
MYR2,000 - MYR3,000 Sebulan
Dekat Stesen Tren
- Perform routine maintenance and scheduled servicing on iCAUR electric vehicles.
- Diagnose and repair mechanical, electrical, and electronic vehicle systems.
- Conduct vehicle inspections and identify faults using manufacturer diagnostic equipment. ...
Posted
12 days ago
Boleh Sembang
MYR2,300 - MYR3,000 Sebulan
Dekat Stesen Tren
- Provide breakdown and preventive maintenance service.
- Work according to schedule as assigned by the scheduler.
- Manage installation, repair, preventive maintenance, and test tasks. ...
Posted
a month ago
MYR2,000 - MYR2,500 Sebulan
Graduan Baru
- 5 axis CNC Milling/ 3-axis CNC Milling
- · Independently setup a 5 axis CNC milling/ 3-axis CNC Milling machine for high precision part manufacturing.
- · Run a CNC 5 axis CNC milling machine with +/-0.01mm precision. ...
Posted
a month ago
MYR2,000 - MYR2,500 Sebulan
Graduan Baru
- 5 axis CNC Milling/ 3-axis CNC Milling
- · Independently setup a 5 axis CNC milling/ 3-axis CNC Milling machine for high precision part manufacturing.
- · Run a CNC 5 axis CNC milling machine with +/-0.01mm precision. ...
Posted
a month ago
MYR2,000 - MYR2,500 Sebulan
Graduan Baru
- 5 axis CNC Milling/ 3-axis CNC Milling
- · Independently setup a 5 axis CNC milling/ 3-axis CNC Milling machine for high precision part manufacturing.
- · Run a CNC 5 axis CNC milling machine with +/-0.01mm precision. ...
Posted
a month ago