Electrical And Engineering Jobs in Pulau Pinang - September 2026 - Urgent Hiring
Showing 237 jobs results for
"electrical and engineering"
in Pulau Pinang
Mechanical & Electrical Technician / Electrical Assembler
MYR2,500 - MYR3,500 Per Month
- Assemble electrical and electronic components according to technical drawings and schematics.
- Perform wiring, soldering, and testing of electrical components.
- Ensure all assembly work complies with safety and quality standards. ...
Be an early applicant!
Posted
a day ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
2 months ago
MYR2,300 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
- Perform routine maintenance, calibration, and repair of electronic and electrical equipment according to established procedures and safety guidelines.
- Conduct diagnostic tests and troubleshooting to identify and resolve hardware and software issues on various electronic systems.
- Assist in the assembly, installation, and setup of new equipment, ensuring all connections and configurations are accurate. ...
Posted
a month ago
MYR4,000 - MYR6,000 Per Month
- Responsible for the electrical assembly, wiring, panel integration, testing, and troubleshooting of custom-built automation equipment.
- Assemble and install electrical components into control panels according to electrical schematics and layout drawings.
- Perform control panel wiring, cable routing, labelling, and electrical integration for automation machines. ...
Be an early applicant!
Posted
15 days ago
MYR1,700 - MYR2,500 Per Month
- Carry out installation, upgrade, maintenance, testing and commissioning works at site as assigned.
- Perform troubleshooting and corrective works for CCTV systems and related equipment.
- Support site activities according to project schedules and requirements. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
Be an early applicant!
Posted
12 days ago
MYR2,500 - MYR3,500 Per Month
- Coordinate day-to-day technical and field operations across all assigned sites within the Northern Zone.
- Coordinate technicians and Team Leaders for Installation & Upgrade, Preventive Maintenance, and Testing & Commissioning activities.
- Monitor site activities to ensure works are completed according to project requirements and schedules. ...
Be an early applicant!
Posted
12 days ago
Undisclosed
- Conduct machines / equipment demonstrations.
- Install & commission machines / equipment.
- Provide guidance to the end user on how to operate our machines / equipment. ...
Posted
a month ago
MYR2,300 - MYR2,500 Per Month
- Lead a team of technicians to meet the company’s technical requirements
- Ensure client issues are addressed and resolved in a timely manner
- Ensure all new product evaluations are carried out effectively, on schedule, and are suitable for the market ...
Posted
a month ago
MYR2,000 - MYR2,800 Per Month
- Assist in machine assembly, installation, testing, and commissioning activities.
- Perform preventive maintenance, servicing, and troubleshooting of machinery and equipment.
- Attend customer sites for installation, maintenance, repair, and technical support. ...
Be an early applicant!
Posted
5 days ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
2 months ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
2 months ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
2 months ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
2 months ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- Perform product testing, qualification, and failure analysis to support new product introductions, engineering evaluations, and customer requirements.
- Execute engineering qualification plans including RMA investigations, assembly qualifications, production sampling, and product validation activities.
- Support system-level debugging using diagnostic software, bus analyzers, and engineering test tools. ...
Be an early applicant!
Posted
8 days ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
2 months ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
2 months ago
Undisclosed
- Performing daily, weekly, monthly, and scheduled preventive maintenance activities.
- Performing corrective maintenance and repair work during equipment breakdowns.
- Conducting equipment inspection and identifying abnormal conditions. ...
Be an early applicant!
Posted
8 days ago
MYR2,500 - MYR3,300 Per Month
- Conduct functional testing on electronic module samples, including measurement of parameters such as Output Motor (V), Cut-off Output Current (A), and Cut-off Timing (S)
- Perform AM2 measurements, including analysis of Energy Curves and Spike Curves
- Support flashing of software into electronic module devices ...
Posted
2 months ago
Technical Service Engineer (Mandarin Speaker)
MYR2,500 - MYR4,000 Per Month
George Town, Pulau Pinang
- Take charge of assigned products and ensure smooth operations while providing continuous service support.
- Perform installation and commissioning of machines/equipment on-site.
- Carry out preventive maintenance, troubleshooting, and repair of equipment in-house or on-site. ...
Be an early applicant!
Posted
3 days ago
Service Engineer- Mandarin Speaker Needed
MYR2,500 - MYR4,000 Per Month
George Town, Pulau Pinang
- Take charge of assigned products and ensure smooth operations while providing continuous service support.
- Perform installation and commissioning of machines/equipment on-site.
- Carry out preventive maintenance, troubleshooting, and repair of equipment in-house or on-site. ...
Be an early applicant!
Posted
3 days ago
Technician (Fresh) - Batu Kawan/Bayan Lepas
MYR1,900 - MYR2,000 Per Month
- Running machine
- Quality checking and inspection on measurements based on specifications from the customers (using Micrometers, Calipers etc).
- Lifting and packing of completed products (ribbon coils, nuggets etc). ...
Posted
2 days ago
MYR6,000 - MYR8,000 Per Month
George Town, Pulau Pinang
- Develop and maintain PLC software for automation and test systems.
- Build UI/UX interfaces for operators, engineers, and internal users.
- Develop algorithms for control logic, automation sequencing, data handling, and system optimisation. ...
Be an early applicant!
Posted
21 days ago
MYR2,500 - MYR3,800 Per Month
Fresh Graduates
- Design, develop, and deploy IoT/AI systems and applications to meet client requirements
- Integrate IoT devices, sensors, and cloud platforms to enable seamless data collection and analysis
- Troubleshoot and maintain IoT infrastructure, ensuring optimal performance and reliability ...
Posted
5 days ago
Project Management Engineer
MYR2,500 - MYR3,800 Per Month
Fresh Graduates
- Plan, coordinate, and monitor project activities to ensure successful project delivery.
- Manage project schedules, milestones, resources, and budgets.
- Coordinate with customers, suppliers, subcontractors, and internal departments. ...
Be an early applicant!
Posted
6 days ago
Undisclosed
Fresh Graduates
- Assemble jig & fixture components and automation systems according to engineering drawings and specifications.
- Perform mechanical fitting, alignment, and installation of parts.
- Conduct functional testing and ensure all assemblies meet the required quality standards. ...
Posted
7 days ago
Undisclosed
- Complete mechanical assembly/electrical assembly with guidance by the senior technician, team leader, supervisor and/or engineering, installation and testing of equipment to time deadlines.2. Assemble and integrate a variety of mechanical and electrical assemblies. 3. Obtain and verify kitted (pre-picked) details parts and assemblies were issued correctly by comparing part numbers and quantities to drawing(s).4. Follow oral/written instructions provided by the senior technician, team leader, supervisor and/or engineering to complete assembly tasks.5. Ensure that parts issued are free of visible defects.6. Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean.7. Travel to customer sites and carry out installation, servicing work and training as scheduled.8. Other duties and assignments as instructed by superiors from time to time.9. Perform On Site Customer support assign by the Superior or the management.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
2 days ago
Up to MYR2,000 Per Month
Fresh Graduates
- In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
- In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages.
- To assist Maintenance Fitter to dismantle the faulty electric motors, send it for rewinding and reassembling after repairs. ...
Be an early applicant!
Posted
2 months ago
Undisclosed
- Able to work in a cleanroom environment while wearing the required PPE.2. Lead the production assembly team and collaborate with Engineering, Planning, Quality, and Warehouse departments toensure the timely completion of production builds.3. Ensure the production team adheres to workmanship standards, quality requirements, and assembly procedures.4. Responsible for daily resource planning of the production team to meet delivery schedules.5. Monitor production build progress, take necessary corrective actions, and provide timely reports to senior management.6. Maintain high 6S standards and ensure cleanliness, organization, and discipline on the production floor.7. Ensure mandatory training requirements are met and initiate cross-training programs to strengthen team flexibility and skillcoverage.8. Initiate and support continuous improvement efforts to drive productivity, quality, and efficiency in collaboration withrelevant departments.9. Other duties and assignments as instructed by superiors from time to time.10. To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to generalsafety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
Be an early applicant!
Posted
2 days ago
Undisclosed
- Review training plans for the department
- Review assembly technician skills matrix yearly
- Review the skills matrix yearly once the technician completes the training ...
Be an early applicant!
Posted
2 days ago
Undisclosed
Fresh Graduates
- Liaise with Mechanical Design and Software teams to understand project requirements and integrate electrical design specifications into the machine's development.
- Create and maintain detailed bills of materials (BOM), selecting and sourcing electrical components aligned with project needs, cost-effectiveness, and availability.
- Utilize AutoCAD/Eplan (or other electrical schematic tools) to design electrical schematic diagrams in accordance with customer specifications and project requirements. ...
Be an early applicant!
Posted
2 days ago