Electrical Electronics Engineering Jobs in Pulau Pinang - October 2026 - Urgent Hiring
Showing 32 jobs results for
"electrical electronics engineering"
in Pulau Pinang
MYR2,500 - MYR3,300 Per Month
- Conduct functional testing on electronic module samples, including measurement of parameters such as Output Motor (V), Cut-off Output Current (A), and Cut-off Timing (S)
- Perform AM2 measurements, including analysis of Energy Curves and Spike Curves
- Support flashing of software into electronic module devices ...
Posted
2 months ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- Perform product testing, qualification, and failure analysis to support new product introductions, engineering evaluations, and customer requirements.
- Execute engineering qualification plans including RMA investigations, assembly qualifications, production sampling, and product validation activities.
- Support system-level debugging using diagnostic software, bus analyzers, and engineering test tools. ...
Be an early applicant!
Posted
25 days ago
Undisclosed
- Performing daily, weekly, monthly, and scheduled preventive maintenance activities.
- Performing corrective maintenance and repair work during equipment breakdowns.
- Conducting equipment inspection and identifying abnormal conditions. ...
Be an early applicant!
Posted
25 days ago
Undisclosed
- Developing the annual, monthly, weekly, and daily preventive maintenance schedule.
- Creating maintenance work instructions, checklists, SOPs, and troubleshooting guides.
- Identifying critical equipment and defining maintenance frequency. ...
Be an early applicant!
Posted
25 days ago
Undisclosed
- Execute production on Robot welding process.
- Conduct routine inspections to ensure equipment reliability, safety, and optimal performance (wire feed, gas nozzle cleaning, diffuser etc)
- Assist engineers in robot programming, teaching and minor set-up.Monitor machine performance and feedback recurring issues to supevisor. ...
Be an early applicant!
Posted
19 days ago
MYR3,800 - MYR5,000 Per Month
- Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
- Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
- Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...
Posted
2 months ago
MYR900 - MYR1,000 Per Month
- System Monitoring: Assist in tracking daily solar plant performance and alarms , verifying inverter statuses , and supporting engineers with Low Peak Performance (LPP) data analysis.
- Field & Preventive Support: Assist engineers with on-site inspections, cleaning supervision, electrical component checks, and tool/PPE preparation.
- Documentation & Claims: Assist in drafting preventive maintenance reports, updating internal platform logs, and compiling documentation/photos for insurance or warranty cases. ...
Be an early applicant!
Posted
18 days ago
MYR900 - MYR1,000 Per Month
- Site Supervision: Oversee on-site visits and installations, collaborating closely with field teams to ensure adherence to safety protocols and quality standards.
- Project Management: Manage and coordinate the scheduling project sites and the warehouse, ensuring timely and efficient delivery. Oversee project logistics to ensure smooth execution.
- Troubleshooting: Assisting to support and make good of Solar Troubleshooting issues. ...
Be an early applicant!
Posted
18 days ago
Undisclosed
- Develop, formulate, evaluate and execute process development and process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation or experiments to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Carry-out daily shiftly routines job as implemented by mold team.
- Responsible for any line issue either equipment or tooling and optimizing trouble-shooting for reducing downtime and waiting time manner
- Prioritize standby support on areas designated by crew leader/superior. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Responsible for process ownership of DA/GA machine in assembly line.
- Establish and setup new DA/GA assembly process capabilities and materials including hand-on equipment setup.
- Monitor performance, quality and reliability of die attach process. Identify problems, recommendation, and implementation of corrective and preventive actions. ...
Be an early applicant!
Posted
a month ago
MYR4,000 - MYR6,000 Per Month
- Responsible for the assembly, integration, testing, troubleshooting, and improvement of automation machinery and equipment according to engineering drawings, work instructions, and quality standards.
- Assemble automation machines, modules, and mechanical sub-assemblies according to engineering drawings, BOMs, and work instructions.
- Perform mechanical fitting, alignment, adjustment, and integration of machine components. ...
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment (Cu Clip Inline Machine and all Offline Machine).
- Verify machine settings and ensure calibration is correct before starting operations. ...
Be an early applicant!
Posted
2 months ago
MYR6,000 - MYR7,500 Per Month
- Responsible for the assembly, integration, testing, troubleshooting, and improvement of automation machinery and equipment according to engineering drawings, work instructions, and quality standards.
- Assemble automation machines, modules, and mechanical sub-assemblies according to engineering drawings, BOMs, and work instructions.
- Perform mechanical fitting, alignment, adjustment, and integration of machine components. ...
Good electro-mechanical equipment troubleshooting skills.
Read and orally communicate in Mandarin (writing ability not required).
+3
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Responsible for process ownership of CIS Smart Manufacturing – AMR machine and new system in assembly line.
- Establish and setup new AMR and system for assembly process capabilities and materials including hand-on equipment setup and prepare document and specification for AMR and new system control.
- Monitor performance and quality of AMR machine and system process. Identify problems, recommendation, and implementation of corrective and preventive actions. ...
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago
Undisclosed
- Equipment Operation and Monitoring:
- Set up, operate, and monitor production equipment
- (Cu Clip Inline Machine and all Offline Machine). ...
Posted
a month ago