Electrical Jobs in Bayan Lepas - September 2026 - Urgent Hiring
Showing 140 jobs results for
"electrical"
in Bayan Lepas
Mechanical & Electrical Technician / Electrical Assembler
MYR2,500 - MYR3,500 Per Month
- Assemble electrical and electronic components according to technical drawings and schematics.
- Perform wiring, soldering, and testing of electrical components.
- Ensure all assembly work complies with safety and quality standards. ...
Posted
3 days ago
MYR2,300 - MYR3,500 Per Month
- Perform routine preventive maintenance and troubleshoot equipment failures to minimize downtime.
- Support daily manufacturing operations, including equipment setup and responding to equipment alarms.
- Assist engineers during process adjustments, testing, and production trials. ...
Be an early applicant!
Posted
a day ago
Undisclosed
- Handle full spectrum of accounting functions, including preparation of financial and management reports, budgeting, forecasting, financial analysis, as well as banking and taxation matters.
- Oversee and support statutory audit activities to ensure timely and accurate completion.
- Liaise with internal and external stakeholders, including auditors, tax agents, bankers, company secretaries, and legal advisors, to ensure compliance with statutory and regulatory requirements. ...
Be an early applicant!
Posted
4 days ago
Undisclosed
- Monitor day-to-day inspection operations on vendors supplied products.
- To liaise with the incoming inspection team and buyer on supplier quality issues.
- Supplier quality performance monitoring, evaluation & drive for improvement. ...
Be an early applicant!
Posted
4 days ago
Undisclosed
- Responsible for Accounts Payable transaction processing support (verify invoices and make sure use the proper GL account codes), ensure the daily operation's activities assigned are managed and delivered timely.
- Responsible for monitoring the Accounts Payable cycle from invoice processing to payment and check reimbursement claims in order to ensure the timelines and quality meet the KPIs and targets.
- Communicate with suppliers and internal management about the AP process ranging from invoicing to payment, including AP reconciliation. ...
Be an early applicant!
Posted
4 days ago
MYR2,500 - MYR3,300 Per Month
- Conduct functional testing on electronic module samples, including measurement of parameters such as Output Motor (V), Cut-off Output Current (A), and Cut-off Timing (S)
- Perform AM2 measurements, including analysis of Energy Curves and Spike Curves
- Support flashing of software into electronic module devices ...
Posted
2 months ago
MYR2,600 - MYR4,000 Per Month
- Lead and supervise manufacturing operators and line leaders to achieve production output, quality, and cycle time targets.
- Ensure compliance with cleanroom protocols, safety regulations, and quality standards.
- Participate in process improvement, cost reduction, yield enhancement, and RPA projects. ...
Be an early applicant!
Posted
a day ago
MYR2,300 - MYR2,600 Per Month
- Prepare quotations, proposals, sales orders, invoices, and other sales-related documents accurately and promptly.
- Coordinate with the Sales team to ensure smooth processing of customer inquiries and project documentation.
- Maintain and update customer records, sales databases, and CRM systems. ...
Posted
17 days ago
Undisclosed
- Serve as focal point of contact for customers on quality-related matters with minimal supervision.2. Ensure products meet customer specifications, drawings, and quality standards.3. Lead customer audits preparation, coordination, and follow-up on audit findings.4. Lead root cause analysis and corrective action implementation; ensure timely closure and effectiveness verification.5. Prepare and maintain quality documentation (Control Plan, Inspection Reports, FAI, PPAP documents where applicable).6. Monitor quality performance metrics and drive improvement actions based on data analysis.7. Identify process improvement opportunities and work with cross-functional teams to implement solutions.8. Provide technical guidance to QA Technicians on inspection methods and quality requirements.9. Participate in new product introduction (NPI), including pretest, first article inspection, and buyoff.10. Support QMS implementation, audit compliance, and continuous improvement initiatives.11. Handle internal non-conformance and support MRB activities.12. Ensure compliance to ISO standards, safety practices, SOP, and company policies.13. Mentor and coach E1 on quality standards and documentation best practices.
Be an early applicant!
Posted
4 days ago
MYR4,000 - MYR6,000 Per Month
- Responsible for the electrical assembly, wiring, panel integration, testing, and troubleshooting of custom-built automation equipment.
- Assemble and install electrical components into control panels according to electrical schematics and layout drawings.
- Perform control panel wiring, cable routing, labelling, and electrical integration for automation machines. ...
Be an early applicant!
Posted
17 days ago
Undisclosed
- Fully accountable to maintain required equipment OEE and equipment downtime performance.
- Equipment conversion
- Provide feeds back and request for Engineering support if not able to resolve within own shift. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Set-up, convert, run and monitor AOI machine
- Follow work instruction for AOI process
- Create recipe for different devices ...
Be an early applicant!
Posted
a month ago
Human Resource Executive
MYR3,200 - MYR4,000 Per Month
- Coordinate recruitment activities for Direct Labour, Indirect Labour, and foreign workers based on approved manpower requirements.
- Assist with job posting, candidate screening, interview arrangements, candidate follow up, and preparation of employment documents.
- Liaise with recruitment agencies, job portals, educational institutions, and other recruitment sources to support hiring needs. ...
Posted
3 days ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Posted
a month ago
Undisclosed
- Monitor FVI yield performance.
- Support engineer for any FVI & TBE issue including low yield lot.
- Support production line in achieving Quality, Delivery, Cycle Time, and Process Improvement. ...
Posted
a month ago
Undisclosed
- Hand on setup the equipment and process during engineering activities such as engineering evaluations.
- Evaluation report compilation and initial data analysis.
- Support Yield & Quality KPI improvement. ...
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Undisclosed
- Develop, create, and optimize AOI inspection programs for PQFN assembly processes.
- Fine-tune inspection parameters to maximize defect detection while minimizing false rejects.
- Validate new AOI programs before production release. ...
Posted
a month ago
Technician (Penang)
MYR1,800 - MYR2,600 Per Month
+Additional Compensation
Fresh Graduates
- Perform welding works.
- Install Water Treatment Systems, Rainwater Harvesting (RWH), IC & ER, pumps, piping, and frontal piping on site.
- Plan and develop solutions for customers, including troubleshooting. ...
Posted
10 hours ago
Undisclosed
- Testing products for safety, capacities, compliance, and performance.
- Examining and investigating specific aspects and components of products in question.
- Compiling reports on findings and testing data gathered. ...
Be an early applicant!
Posted
17 days ago
Undisclosed
- Setup test equipment within the allocated time period that meet the mechanical & electrical first pass yield requirements.
- Repair equipment failures with no impact on quality as well as mechanical & electrical yield loss during and after repair.
- Complete every setup checklist, conversion checklist & intervention checklist for every setup/ downtimes. ...
Be an early applicant!
Posted
17 days ago
Undisclosed
- Develop, formulate, evaluate and execute process development and process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation or experiments to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
17 days ago
Undisclosed
- Set-up, convert, run and monitor AOI machine
- Follow work instruction for AOI process
- Create recipe for different devices ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Fully accountable to maintain required equipment OEE and equipment downtime performance.
- Equipment conversion
- Provide feeds back and request for Engineering support if not able to resolve within own shift. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Perform PM activities from Master PM schedule.
- Maintain 5S for all machines at work areas.
- Troubleshooting Marking machines. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Monitor FVI yield performance.
- Support engineer for any FVI & TBE issue including low yield lot.
- Support production line in achieving Quality, Delivery, Cycle Time, and Process Improvement. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- To perform FA on devices which are reported to be failing electrical test from Manufacturing/NPI or customer return.
- To write quality FA report and provide conclusive findings that can help engineering team to root cause the issue.
- To innovate FA approach or methodology to improve FA capability and cycle time at the lowest cost for the benefits of the organization. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Develop, formulate, evaluate and execute process engineering in area of responsibility to improve yield, quality and productivity and cost.
- Monitor, identifies, verifies analysis and give disposition to process related and technical concern of the product.
- Conduct evaluation to characterize failure in terms of extent of damage and gives disposition on implications attribute to process handling materials defects or machine trouble. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Design new package types and conduct feasibility study / Technical Gap Analysis.
- Generate drawing leadframe, copper clip, package outline and strip outline.
- Generate external bonding diagram. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Compute and review customer RFQs
- Assist in evaluating various pricing proposals
- Collaborate with other departments to develop pricing for products/process ...
Be an early applicant!
Posted
a month ago
Job searches related to “Electrical”