Engineer Jobs in Bayan Lepas - August 2026 - Urgent Hiring

Paparan 811 hasil carian kerja kosong untuk "engineer" di Bayan Lepas
Jangan lepaskan peluang untuk kerja Engineer terkini! di Bayan Lepas
Boleh Sembang
MYR5,500 - MYR6,300 Sebulan
  • Documents selection of components/subassemblies to deliver required performance and compliance specifications.
  • Interacts with other engineering disciplines to define component requirements and/or modify component selections.
  • Works under discretion of Sr Component Engineers to analyze designs to recommend optimal selection of components and/or subassemblies. ...

Jadilah pemohon terawal!

Posted
2 days ago
Boleh Sembang
MYR2,000 - MYR2,500 Sebulan
  • Demonstrates strong attention to detail and precision in selecting specifications and executing measurements in accordance with correct CD definitions. Familiarity with process layer structures (e.g., nitride, spacer) is an added advantage.
  • Shows patience and consistency in performing repetitive measurement tasks.
  • Possesses strong analytical thinking, including sound decision-making on whether CDs should be corrected or retained. Able to assess if available specifications provide sufficient information to proceed with CD corrections. ...

Jadilah pemohon terawal!

Posted
2 days ago
Boleh Sembang
MYR3,000 - MYR3,600 Sebulan
  • Perform electrical validation and fault isolation on failed products.
  • Identify and analyze physical defects related to electrical failures.
  • Evaluate assembly, fabrication, and substrate processes to determine root causes of failure. ...

Jadilah pemohon terawal!

Posted
2 days ago
Boleh Sembang
MYR4,000 - MYR5,500 Sebulan
  • Perform rack & stack installation of servers, switches, and storage equipment
  • Install and manage fiber and copper cabling (RJ45, LC, SC connectors)
  • Handle server landing (new deployment) and configuration support ...
Data Center Operations Infrastructure Support
+20

Jadilah pemohon terawal!

Posted
3 days ago
Boleh Sembang
MYR2,500 - MYR3,300 Sebulan
  • Conduct functional testing on electronic module samples, including measurement of parameters such as Output Motor (V), Cut-off Output Current (A), and Cut-off Timing (S)
  • Perform AM2 measurements, including analysis of Energy Curves and Spike Curves
  • Support flashing of software into electronic module devices ...
Electrical Engineering Electronics Engineering
+1

Jadilah pemohon terawal!

Posted
5 days ago
Boleh Sembang
MYR3,000 - MYR4,000 Sebulan
  • To operate complex equipment and analytical tools in ESD environment.
  • Operating and using Central Lab support, Package and Physical FA techniques; BKM to satisfy all FA need.
  • Taking up the responsibilities of equipment ownership, development and proliferation to users if identified. ...

Jadilah pemohon terawal!

Posted
2 days ago
Boleh Sembang
MYR2,000 - MYR2,500 Sebulan
Graduan Baru
  • Perform Failure Analysis & Fault Isolation (FAFI) to determine defect modes and root causes.
  • Conduct electrical failure analysis to identify component defects and support factory rejection cases.
  • Carry out validation and fault isolation using tools such as Parametric Analyzer, Keithley meter, iTDR, SEM/EDX, and IRLC. ...
Semiconductor Manufacturing Electrical & Engineering
+1

Jadilah pemohon terawal!

Posted
3 days ago
Boleh Sembang
MYR1,700 - MYR2,500 Sebulan
+Pampasan Tambahan

11900 Bayan Lepas, Bayan Lepas

  • Operate and maintain production equipment according to standard operating procedures.
  • Perform quality control checks on products and processes to ensure they meet specifications.
  • Troubleshoot and resolve minor equipment malfunctions and process deviations. ...
Process Improvement Product Development
+8

Jadilah pemohon terawal!

Posted
6 days ago
premium banner
Boleh Sembang
MYR2,400 - MYR3,000 Sebulan
  • Responsible for the technical direction and engineering execution of materials, processes and systems. The Engineering admin collaborates with other technical staff to ensure that all aspects of a project are addressed in a timely fashion.
  • To ensure proper maintenance and control of customer’s drawing, supplier specification and all engineering specification.
  • To prepare, analysis, update and compile design drawing, MIS and related documentation. ...

Jadilah pemohon terawal!

Posted
2 days ago
Boleh Sembang
Undisclosed
  • Design component-level circuits for precision parametric measurement and dynamic signal analysis
  • Develop automated test system software for analog and mixed-signal integrated circuits
  • Participate in all phases of product development including: ...

Jadilah pemohon terawal!

Posted
9 days ago
Boleh Sembang
MYR3,800 - MYR5,000 Sebulan
  • Ensure process readiness through effective FMEA, Control Plan, OCAP, Work Instruction, Process Spec & Check List including EHS requirements.
  • Monitor and drive improvement on key process health indicators (Yield/Defect, Quality etc).
  • Drive Statistical Process Control and improvement to meet/exceed process Cpk target. ...

Jadilah pemohon terawal!

Posted
11 days ago
Boleh Sembang
MYR2,500 - MYR4,000 Sebulan
  • Responsible for performing a variety of technical support duties in one or more manufacturing areas. Duties may be related to installation, maintenance, repair, and support of manufacturing equipment, technical support of one or more production processes, product tests, and troubleshooting, and technical analyses and problem-solving. Conducts tests, experiments, and/or problem resolution associated with components, parts, products, or processes/systems. May design and/or build tools. Disciplines:
  • Machinery & Equipment: Supports multi-discipline manufacturing processes of the repair, maintenance, installation, and/or enhancement of a select group of machinery and equipment or interrelated systems.
  • Process/Product/Production: Provides technical support in chemical, electronic or mechanical operations, tests, experiments, and/or problem resolution associated with components, parts, products, or processes/systems. ...
Machinery & Equipment Test & Repair
+2

Jadilah pemohon terawal!

Posted
10 days ago
premium banner
Boleh Sembang
MYR2,300 - MYR3,000 Sebulan
+Pampasan Tambahan
  • Precision Trimming & Fitting: Carefully trim, adjust, and fit dental models using specialized hand tools and micro-motors.
  • Surface Sanding & Finishing: Use various grades of sandpaper, burs, and rotary tools to smooth out rough edges and shape pieces to exact specifications.
  • High-Shine Polishing: Polish completed dental work using polishing wheels, compounds, and steam cleaners to achieve a flawless, smooth, and high-gloss finish. ...
Posted
36 minutes ago
Boleh Sembang
MYR6,000 - MYR8,000 Sebulan
  • Ensure Incoming Quality, In Process Quality, and Out Going Inspection are effectively performed with close loop feedback and corrective actions.
  • Ensure effective change management and MRB (Material Review Board) implementation.
  • Facilitate effective FMEA/Control plan review to ensure all risks are effectively identified and addressed. ...

Jadilah pemohon terawal!

Posted
11 days ago
Boleh Sembang
MYR1,700 - MYR1,800 Sebulan
  • Responsible for reliability testing support with loading and unloading of integrated circuit devices onto biased boards and chambers activities. Ensure to meet cycle time and zero quality issue.
  • Support electrical testing and data-logging of integrated circuit devices using automated test equipment.
  • Bench testing and debugging of reliability test circuits / boards verification. ...

Jadilah pemohon terawal!

Posted
5 days ago
Boleh Sembang
MYR10,000 - MYR15,000 Sebulan
  • To lead a team of mechanical and electrical engineers in developing and maintaining process for the following zones: Surface Mount Technology (SMT), Electrical Testing (ET), Backend manual assembly and automated Processes, and Final Inspection.
  • Responsible for driving process improvement initiatives, optimizing costs, ensuring technical excellence and supporting cross-site operations.
  • Process Efficiency: Achieve defined cycle time, throughput, and yield improvements. ...
Lean Manufacturing Six Sigma
+1

Jadilah pemohon terawal!

Posted
11 days ago
MYR2,100 - MYR2,300 Sebulan
Graduan Baru
  • Product testing APTE.
  • Responsible for testing the instrument level and perform troubleshooting.
  • Responsible for PCA and rework. ...
Technician Electrical Troubleshooting
+1

Jadilah pemohon terawal!

Posted
19 days ago
Boleh Sembang
MYR4,000 - MYR5,000 Sebulan
  • · Monitor and improve SMT production process performance to achieve quality and productivity targets
  • · Troubleshoot SMT process issues related to solder printing, placement, reflow, and AOI
  • · Support SMT machines setup, maintenance coordination, and process optimization ...
Posted
a month ago
Boleh Sembang
MYR2,200 - MYR3,500 Sebulan
+Pampasan Tambahan
  • Send your updated CV to: nurnabilah.s@manpower.com.myWhatsApp: 012-274 1997Key ResponsibilitiesPerform technical support duties across manufacturing operations, including:Installation, maintenance, repair, and support of manufacturing equipmentTechnical support for production processesProduct testing, troubleshooting, and problem-solving activitiesConducting technical analyses, tests, and experiments related to products, processes, and systemsAssisting in the design and fabrication of tools where requiredTest & Repair FunctionsTest, calibrate, repair, monitor, install, and diagnose equipment, systems, and assembliesWork according to established guidelines, procedures, and work instructionsPerform box-build level debuggingConduct PCA-level troubleshooting and reworkSupport continuous improvement and operational efficiency initiativesRequirementsDiploma or equivalent qualification in:Electronic EngineeringMechatronic EngineeringStrong troubleshooting and technical problem-solving skillsExperience in manufacturing, testing, repair, or production support environments is an advantageAble to work on rotational shiftsTeam player with a proactive attitude and willingness to learn

Jadilah pemohon terawal!

Posted
9 days ago
MYR2,000 - MYR3,500 Sebulan
Graduan Baru
  • Support preventive maintenance, calibration, and corrective maintenance (troubleshooting and repair) for various automated and manual machinery, including equipment, tooling, fixtures, and ESD devices.
  • Assist in machine and assembly workstation setup, production utilities support, safety compliance, and 5S implementation.
  • Coordinate vendor activities, including service support, spare parts sourcing, and procurement. ...
computer skills maintenance
+2
Posted
24 days ago
premium banner
Boleh Sembang
MYR1,800 - MYR2,600 Sebulan
+Pampasan Tambahan
Graduan Baru
  • Perform welding works.
  • Install Water Treatment Systems, Rainwater Harvesting (RWH), IC & ER, pumps, piping, and frontal piping on site.
  • Plan and develop solutions for customers, including troubleshooting. ...
Welding Electrical Engineering
+1

Jadilah pemohon terawal!

Posted
a day ago
MYR8,000 - MYR10,000 Sebulan
  • Lead the development of system architecture for automation equipment and production line solutions.
  • Convert customer requirements, URS, process needs, and technical specifications into practical system-level designs.
  • Define equipment functions, process flow, machine layout, module interfaces, control logic, data flow, and integration requirements. ...
Technical Knowledge Risk Management
+11
Posted
24 days ago
Boleh Sembang
MYR3,200 - MYR4,500 Sebulan
  • Monitor and analyze SPC/FDC charts in accordance with CAS/SOP
  • Review setup data and release tools following standard procedures
  • Troubleshoot process-related issues and ensure accurate documentation & pass-down ...
PVD CVD
+5
Posted
2 months ago
MYR1,700 - MYR1,800 Sebulan
Graduan Baru
  • Responsible for reliability testing support with loading and unloading of integrated circuit devices onto biased boards and chambers activities. Ensure to meet cycle time and zero quality issue.
  • Support electrical testing and data-logging of integrated circuit devices using automated test equipment.
  • Bench testing and debugging of reliability test circuits / boards verification. ...
Reliability Testing Statistical Analysis
+7
Posted
2 months ago
Boleh Sembang
MYR2,000 - MYR2,400 Sebulan
  • Manage laboratory inventory, including receiving, issuing, and tracking equipment, spare parts, and hardware units.
  • Perform Check-In/Check-Outactivities and processMIR (Material Issue Request) requests.
  • Execute demix activities for returned or reassigned equipment. ...

Jadilah pemohon terawal!

Posted
2 days ago
Boleh Sembang
MYR8,000 - MYR10,000 Sebulan
  • Design, develop, test, debug and implement applications to satisfy business requirements of projects using C# and the .NET stack (.NET 6/7/8).
  • Write clean, maintainable, and efficient code following best practices (SOLID etc.).
  • Provide technical consultation for developing new systems or enhancing existing ones to support the business needs. ...
.NET C#
+24

Jadilah pemohon terawal!

Posted
9 days ago
Boleh Sembang
MYR4,500 - MYR5,500 Sebulan
  • To prepare journals for adjustments, accruals, WIP, payroll, bonus, benefits, and holiday allowances, etc.
  • To ensure posting of journals in accounting system SAP ERP and ensure supporting documents uploaded in the system after posting.
  • Prepare the prepayment schedules, journals, and postings. ...

Jadilah pemohon terawal!

Posted
9 days ago
Boleh Sembang
Undisclosed
Kerja di Rumah
  • - As a coordinator, received Change Order from internal customer - Engineer, Buyer, Planner.
  • - Data entry and some administrative job into the ERP system like Oracle and 3DExperience/Enovia and other platforms.
  • - Handle some coordination job / advisor between the stakeholders. ...

Jadilah pemohon terawal!

Posted
a month ago
Boleh Sembang
MYR5,000 - MYR7,000 Sebulan
  • • Work closely with the sales team to identify customer needs and recommend suitable technical solutions• Conduct product demonstrations, technical presentations, and solution discovery sessions• Prepare and present proposals, quotations, and solution recommendations to clients• Provide pre-sales and post-sales technical support to ensure successful solution implementation• Collaborate with engineering and product teams to address customer requirements and technical challenges• Build and maintain long-term relationships with customers and key stakeholders• Troubleshoot technical issues and provide timely solutions to clients• Contribute to sales strategies and provide market feedback to improve products and services
Sales Engineering Problem-Solving
+1

Jadilah pemohon terawal!

Posted
4 days ago
MYR8,000 - MYR10,000 Sebulan
  • Analyze technology development trends in the optical module industry, including CPO, LPO, silicon photonics, andrelated advanced technologies.
  • Develop the company’s medium- and long-term technology roadmap for optical module automation equipment.
  • Lead preliminary research and introduction of new technologies and new processes. ...
Automation Technical Knowledge
+6

Jadilah pemohon terawal!

Posted
24 days ago