For Employers - Post Jobs
Contact Us
Jobs
Companies
Forums
Engineer Jobs in Bayan Lepas - August 2026 - Urgent Hiring
search.result_querys_job
"engineer"
text.in Bayan Lepas
Jangan lepaskan peluang untuk kerja Engineer terkini! di Bayan Lepas
Urus Pemberitahuan
Undisclosed
- Develop Post Sputter Engineering processes, with a focus on lubrication and tape polish.
- Qualify new processes by conducting evaluations, collecting data, and interpreting results using statistical tools.
- Participate in and lead Post Sputter Engineering activities within New Product Introduction (NPI) task forces. ...
Posted
9 days ago
Undisclosed
- Develop Post Sputter Engineering processes, with a focus on lubrication and tape polish.
- Qualify new processes by conducting evaluations, collecting data, and interpreting results using statistical tools.
- Participate in and lead Post Sputter Engineering activities within New Product Introduction (NPI) task forces. ...
Posted
9 days ago
Undisclosed
- Develop Post Sputter Engineering processes, with a focus on lubrication and tape polish.
- Qualify new processes by conducting evaluations, collecting data, and interpreting results using statistical tools.
- Participate in and lead Post Sputter Engineering activities within New Product Introduction (NPI) task forces. ...
Posted
9 days ago
Undisclosed
- Take ownership of the tool hardware design, equipment reconfiguration and install tasks. Drive specification, technical negotiation with vendors, design and documentation, manpower resource coordination, configuration change, tool/hardware installation, qualification testing and tool/hardware buy-off. Ensure project is on schedule, and at the same time deliver with the highest quality by proactively identifying and correcting capability, reliability, maintenance and assembly issues early on. Generate accurate and detailed documentation for technician, engineering, facility, maintenance, stores and process owners.
- Provide accurate and detailed documentation as well as training for reconfiguration, expansion and installation or new and existing media deposition tools and hardware. Monitor and follow through for continuous improvement opportunities across all shifts for both US based and offshore operations.
- Review, analyze and investigate equipment related downtime and provide sound root cause analysis and timely effective corrective actions. ...
Posted
4 days ago
Undisclosed
- Conduct and supervise Failure Analysis (FA) activities for Production and New Product Introduction (NPI) samples, including trend analysis, reporting, and defect characterization.
- Manage and mentor a team of technicians for media FA analysis and defect characterization using first level FA equipment.
- Coordinate second-level analysis with analytical lab teams. ...
Posted
5 days ago
MYR3,000 - MYR4,500 Sebulan
- Install, test and commission new equipment at customers’ sites
- Carry out equipment assembly, servicing, troubleshooting, repair, upgrade and preventive maintenance
- Perform other technical tasks as assigned ...
Posted
4 days ago
Undisclosed
- Develop and maintain QA plans and process routings, which reflect intended/actual activities.
- Provide support for all quoting activities by participation in initial process design, development, and implementation phases.
- Evaluate and support inspection processes via inspection aids and instruction guidelines. ...
Posted
5 days ago
Undisclosed
- Provide technical support and troubleshooting assistance for desktops, laptops, printers, and other IT peripherals
- Install, configure, and maintain operating systems, software applications, and hardware devices
- Diagnose and resolve hardware, software, network, and system-related issues in a timely manner ...
Posted
6 days ago
Undisclosed
- Apply reliability knowledge and methods to design stress conditions to evaluate new products and design changes in coordination with Product Development.
- Write reliability stress plans for engineering evaluations, design verifications, and product and process qualifications and execute on plans working cross-functionally with reliability equipment and test teams.
- Write reliability reports sharing data analysis results, technical observations, and reliability assessments to guide decision making in development activities leading to on-time product releases. ...
Posted
7 days ago
Undisclosed
- Analyze HDD vs Media performance data and drive Media performance optimization
- Monitor Media performance KPIs and guide continuous improvement
- Deliver actionable insights through data/process characterization ...
Posted
10 days ago
Undisclosed
- Analyze HDD vs Media performance data and drive Media performance optimization
- Monitor Media performance KPIs and guide continuous improvement
- Deliver actionable insights through data/process characterization ...
Posted
11 days ago
Undisclosed
- To overasee equipment preventive maintenance as per schedule
- In charge equipment form factor conversion, set-up and buyoff
- Continuous improvement projects ...
Posted
11 days ago
Undisclosed
- To overasee equipment preventive maintenance as per schedule
- In charge equipment form factor conversion, set-up and buyoff
- Continuous improvement projects ...
Posted
12 days ago
MYR3,000 - MYR5,000 Sebulan
- Analyze, develop, and improve manufacturing processes to increase productivity and reduce waste.
- Conduct time studies, process mapping, and line balancing.
- Develop and maintain process documentation such as work instructions, control plans, PFMEA, and flow charts. ...
Posted
9 days ago
Undisclosed
- To overasee equipment preventive maintenance as per schedule
- In charge equipment form factor conversion, set-up and buyoff
- Continuous improvement projects ...
Posted
12 days ago
MYR3,000 - MYR5,500 Sebulan
- New process flow set-up and development.
- Support for new product transfer and trial-run.
- Analysis problem and carry out Trial run corrective action. ...
Posted
10 days ago
Undisclosed
- Planning of assembly processes flow considering manufacturing efficiency. Collaborate with project team to seek and strive for minimizing product cost through design and process optimization.
- Support in the RFQ calculation; calculate and provide investment needed for standard assembly process modules.
- Define equipment specification in accordance to product specification. Plan, purchase (with supervision), setup and release manufacturing cells on time, at budget and with desired requirement. ...
Posted
11 days ago
Undisclosed
- To plan, coordinate and follow-up sputter systems start-up / conversion activities and process documentation.
- To audit sputter parameters and practice periodically, include online SPC and procedure conformance.
- To lead sputter process related issues trouble shooting (common causes), work closely with shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time), yield & quality goal. ...
Posted
13 days ago
Undisclosed
- Responsible for determining the core aspects and success criteria for automation solutions in the area of plastic molding and industrialization processes.
- Responsible for timely and task-oriented processing of projects that encompass process engineering tasks, focusing on account investment and production costs.
- To carry out equipment projects with specific expertise in specialized areas in production (e.g. molds, molding tools, extrusion, injection molding machine). ...
Posted
8 days ago
MYR4,000 - MYR5,000 Sebulan
- Assist the Project Manager in planning, coordinating, and executing project activities, focusing particularly on all electrical systems, equipment, and related infrastructure.
- Support the PM in ensuring the project is delivered according to scope, schedule, cost, and quality requirements.
- Coordinate with consultants, contractors, vendors, utility providers (e.g., TNB), and internal teams on all electrical-related project matters. ...
Posted
12 days ago
Undisclosed
- Determine core aspects and success criteria for automation solutions in product manufacturing and assembly processes.
- Drive projects in production process automation for assembly solutions in cooperation with internal and external stakeholders.
- Work closely with the global Center of Competence (CoC) and related sub-CoC groups. ...
Posted
7 days ago
Undisclosed
- Participate in Non-conformance issue part containment and disposition discussion, and execution during quality incident.
- Responsible for review and approval of discrepant lot disposition in eNCS. Hold authority to reject in the system if it does not meet release requirements.
- Lead Material Review Board (MRB) for Part Containment and Disposition. ...
Posted
5 days ago
Undisclosed
- Control production activities, material flow, and inventory to achieve cost and quality targets and production schedules of the assigned production line(s), and ensure compliance with standards.
- May be responsible for the management and supervision of production technicians and supervisors for senior positions.
- The job function listed is not exhaustive and shall also include any responsibilities as assigned by the Supervisor from time to time. ...
Posted
12 days ago
Undisclosed
- To develop Strategic Supplier’s capabilities to effectively support Keysight’s overall sourcing and technical requirements. Able to provide technical recommendations as per needed.
- Actively explore and be able to source new technologies through market research to meet Keysight’s future requirements.
- To lead on cost saving initiatives project with PLs on alternative material/part recommendation and qualification plan that meet Keysight products requirements. ...
Posted
12 days ago
Undisclosed
- New process flow set-up and development.
- Support for new product transfer and trial-run.
- Analysis problem and carry out Trial run corrective action. ...
Posted
13 days ago
B. BRAUN MEDICAL IND. S/B
Undisclosed
- Retirement benefit scheme
- Long service award
- Medical insurance ...
Posted
19 days ago
MYR5,000 - MYR8,000 Sebulan
- Set up and develop new products in WM, TRR, and DC, ensuring smooth
- Conduct process development risk assessment, evaluation planning (CZ/DOE)
- Establish optimal process conditions through evaluation, apply SPC for stable ...
Posted
13 days ago
Undisclosed
- Normal Shift but expect come into support for unschedule equipment down during odd hours.
- Perform preventive maintenance on machines and maintain accurate maintenance records.
- Act as the first line of response for machine unscheduled downtime and quality issues. ...
Posted
9 days ago
Undisclosed
- Lead strategic equipment engineering initiatives to improve equipment reliability, manufacturing efficiency, OEE performance, and long-term operational sustainability.
- Lead complex equipment troubleshooting and advanced root cause analysis for critical manufacturing issues, implementing robust corrective and preventive actions.
- Develop and standardize best-in-class engineering practices, maintenance strategies, and equipment performance optimization methodologies across manufacturing operations. ...
Posted
16 days ago
job_search.browse_location:
job_search.browse_company:
job_search.more_company
job_search.browse_job_by_title:
job_search.browse_job_by_title:
job_search.more_industry