Engineer Jobs in Bayan Lepas - June 2026 - Urgent Hiring
search.result_querys_job
"engineer"
text.in Bayan Lepas
job_alert.title_toggle_job
job_alert.activate_job_alert
job_alert.job "engineer"
job_alert.in "Bayan Lepas"
job_alert.btn_manage_alert
Undisclosed
- Set up procedures to Run characterization / evaluations samples on Sputter machine following the experiment plan prepared by Sputter Engineers
- Line setup, KPIV buyoff & validation following machine start-up procedures, feedback any abnormality found to Senior Engineers and take appropriate corrective action.
- Check & validate process readback parameters – like voltage, current, gas pressure etc. ...
Posted
17 days ago
Undisclosed
- Develop, implement, and monitor cleanroom environmental surveys, to verify compliance and support area buy-off.
- Develop and execute contamination sampling plans for cleanroom environmental, equipment, tools, and process samples to ensure cleanliness and prevent yield-impacting defects.
- Perform routine and event-based environmental and equipment sampling to support operational readiness and cleanroom classification. ...
Posted
17 days ago
Undisclosed
- Specifically to carry out process capability and development programs related to Lube Process
- Carry out Lube Cpk, instruments’ EMP and Gauge R&R improvement activities
- Process transfer for new products implementation ...
Posted
17 days ago
Undisclosed
- Job Summary:
- To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
- To carry out engineering studies to improve post-sputter processes. ...
Posted
17 days ago
Undisclosed
- To plan, coordinate, and follow up on sputter systems start-up/conversion activities and process documentation.
- To audit sputter parameters and practice periodically, include online SPC and procedure conformance.
- To lead sputter process-related issues troubleshooting (common causes), work closely with the shift process team in sputter process sustaining, troubleshooting & improvement to achieve sputter utilization (downtime), yield & quality goals. ...
Posted
17 days ago
Undisclosed
- Manage the entire product portfolio throughout its lifecycle, ensuring performance, quality, and cost objectives are met.
- Serve as the central point of contact for all product-related matters, providing clear communication and coordination across teams.
- Drive continuous improvement initiatives focused on yield and test processes to optimize costs and enhance product efficiency. Conduct statistical analysis of characterization and test data to identify cost drivers and implement yield improvement programs. ...
Posted
13 days ago
Undisclosed
- Manage the entire product portfolio throughout its lifecycle, ensuring performance, quality, and cost objectives are met.
- Serve as the central point of contact for all product-related matters, providing clear communication and coordination across teams.
- Drive continuous improvement initiatives focused on yield and test processes to optimize costs and enhance product efficiency. Conduct statistical analysis of characterization and test data to identify cost drivers and implement yield improvement programs. ...
Posted
13 days ago
Undisclosed
- BS or MS in Electronics/Computer/Electrical Engineering
- At least 10 years of proven in-depth experience in Custom and Digital Design Implementation. Expertise in Verilog and System Verilog is a must.
- Experience in FPGA/CPLD design and integration is a plus. ...
Posted
13 days ago
Undisclosed
- Lead RTL integration and optimization (power, performance, area) for multi-IP and multi-FPGA systems
- Develop high-performance, reusable IP cores for industrial/automotive use cases
- Define system architectures aligned with customer and industry requirements ...
Posted
13 days ago
Undisclosed
- Analyze reject disks using microscopes and advanced equipment (AFM, SEM EDX, Wyko, Zygo, OSA) to identify and classify defects.
- Interpret defect analysis results, including SEM EDX data, and compile failure analysis reports.
- Lead discussions with process owners on defect issues and work to address unknown defects. ...
Posted
18 days ago
Undisclosed
- Working and interacting with a wide variety of NI staff and NI Alliance partners in semiconductor test engineering, test program structure, hardware design, and fixture design in support of customer solutions.
- Generating requirements document that can be to finalize statements of work
- Defining and implementing project plans, leading project achievements and holding reviews to ensure meeting requirements and ready for deployments. ...
Posted
3 days ago
Undisclosed
- Conduct advanced tribological testing and analysis using state-of-the-art equipment and methodologies
- Design and implement experimental procedures to evaluate friction, wear, and lubrication in complex mechanical systems
- Analyze test data using statistical software and develop comprehensive technical reports ...
Posted
a day ago
Undisclosed
- Unleash the value of systems & hardware through development of drivers, software, or firmware.
- Specify, design, implement, and test software features for new and existing products.
- Drive software development excellence, continuous improvement and bring innovation into software and hardware products. ...
Posted
17 hours ago
Undisclosed
- To develop Strategic Supplier’s capabilities to effectively support Keysight’s overall sourcing and technical requirements. Able to provide technical recommendations as per needed.
- Actively explore and be able to source new technologies through market research to meet Keysight’s future requirements.
- To lead on cost saving initiatives project with PLs on alternative material/part recommendation and qualification plan that meet Keysight products requirements. ...
Posted
3 days ago
Undisclosed
- May redesign products or components to meet cost objectives, component technology obsolescence and customer requirements.
- Participates actively in new product introduction, including influencing the design of the product to ensure manufacturability and conformance with the global supply chain, enabling prototyping while in the R&D lab, testing the reliability of prototypes and managing the transition into production.
- Supports and implements the transition of products and manufacturing processes from prototype to full production and through the entire life cycle of the product. ...
Posted
3 days ago
Undisclosed
- Create concept and detailed 3D CAD design of semiconductor lithography machine, electrical cabinets, rack system, printed circuit board assembly (PCBA), consumer and medical product design according to customer requirements or recognized industry standards.
- Create concept and detailed 3D CAD design of cable/bundle routing and design, machine frame structural design, sheet metal design, machining part design, die cast part design and plastic enclosure parts.
- Perform hand calculation, simulation and testing of machine structure, thermal heat transfer, fluid flow, pressure drop, gas purity and other characteristics that can affect machine performance, and to design an experiment to validate whether the design can meet specifications. ...
Posted
3 days ago
Undisclosed
- AI Agent Development
- System Design: Design, develop, and evaluate AI Agents for transportation and operational workflows.
- Reasoning & Planning: Build Agentic AI systems capable of reasoning, planning, tool usage, and workflow automation. ...
Posted
3 days ago
Undisclosed
- AI Agent Development
- System Design: Design, develop, and evaluate AI Agents for transportation and operational workflows.
- Reasoning & Planning: Build Agentic AI systems capable of reasoning, planning, tool usage, and workflow automation. ...
Posted
3 days ago
Undisclosed
- Resolving problems with parts and assemblies, which do not fit or function properly.
- Reviewing and revising mechanical specifications (either line specs or customer specs) when required.
- Identifying and redesigning parts and assemblies, to achieve cost reduction, quality/yield improvement. ...
Posted
3 days ago
Undisclosed
- Lead the development and debug of test programs for product validation and characterization
- Perform in-depth data analysis of test results to identify failure modes, trends, and opportunities for test optimization
- Own test hardware setup, maintenance, and troubleshooting of automated test equipment (ATE) ...
Posted
4 days ago
Undisclosed
- Create concept and detailed 3D CAD design of semiconductor lithography machine, electrical cabinets, rack system, printed circuit board assembly (PCBA), consumer and medical product design according to customer requirements or recognized industry standards.
- Create concept and detailed 3D CAD design of cable/bundle routing and design, machine frame structural design, sheet metal design, machining part design, die cast part design and plastic enclosure parts.
- Perform hand calculation, simulation and testing of machine structure, thermal heat transfer, fluid flow, pressure drop, gas purity and other characteristics that can affect machine performance, and to design an experiment to validate whether the design can meet specifications. ...
Posted
4 days ago
Undisclosed
- Recruit and interview Test Engineers I & II.
- Communicate criteria to recruiters for Process Technician position candidates.
- Coach Test Engineers in the interviewing/hiring process. ...
Posted
5 days ago
Undisclosed
- Lead and manage a team of technician and take ownership on the overall operational health and integrity of the RODl Water and Wastewater Treatment system (herein called Water Treatment)
- Maintain, operate all RODI and Water Treatment systems, associated equipment, electrical/control equipment, plumbing systems, building related system and equipment repairs
- Manage RODI and Water Treatment capacity and design changes according to the requirements from manufacturing/customers ...
Posted
5 days ago
Undisclosed
- Pattern generation with opcode driven vector generation for digital pin channels which drive signals to the device under test.
- DSP functionality in digitizers for analog waveform capture and analysis.
- DIMM Memory access and pattern sequencing for AWG and DIG functions. ...
Posted
5 days ago
Undisclosed
- Designs automation equipment in respective areas of expertise, e.g., Mechanical, Electronics, Electrical, or Software Application.
- Works closely with Project Manager/Engineer to meet project time line and within budget.
- Reviews, understands and interprets requirements/specification accurately for integration into design of equipment. ...
Posted
5 days ago
Undisclosed
- According to the development needs to complete the new product introduction work, complete the IPD project manufacturing-related development work and tasks, including not limited to tooling development, process development, production line construction;
- Analyze and improve major quality problems, improve product yield and once through the rate, including products from new product introduction to mass production of all processes;
- For the product process and product testing procedures, establish factory technical standards, provide technical support to reduce product manufacturing costs and efficiency improvements, as well as coordination with the supply chain and R&D departments ...
Posted
6 days ago
Undisclosed
- 24x7 Remote Network Monitoring & Management.
- Own the networking issues connecting and supporting the corporate and shared network environment.
- Drive critical issue resolution/Break-Fix for P1/P2 issues. ...
Posted
6 days ago
Undisclosed
- Oversee day-to-day equipment maintenance activities, troubleshooting, and line issue management to ensure high equipment availability and minimal production downtime.
- Lead equipment reliability, maintenance, and engineering improvement initiatives to support stable and efficient manufacturing operations.
- Drive preventive and predictive maintenance strategies to improve equipment reliability, reduce failures, and sustain long-term operational performance. ...
Posted
19 days ago
Undisclosed
- Research and propose alternative parts with effective solutions in consideration of avoiding major software & product calibration, hardware topology changes to replace EOL parts in NI products.
- Implement and simulate designs through CAD and synthesis tools. i.e. Mentor Graphics.
- Verify and validate designs of hardware re-designs. Debug any issues that may arise. ...
Posted
6 days ago
job_search.browse_company:
job_search.more_company
job_search.browse_job_by_title:
job_search.browse_job_by_title: